Skip to contentSkip to conversation

LANANA: To Pending Device Number Registrants

DISCUSSION David Balazic 4 participants 7 messages May 15, 2001 – May 16, 2001

lore
Share & tools
lore
#0 lore raw
Quoted 7 lines · Linus Torvalds
Quoted 5 lines · Neil Brown

Finally, how do I say that I want the root filesystem to be on a particular "mdp" device+partition. I cannot assume that my device will be the first to register with the "disk" layer, so I cannot be sure that "root=/dev/diska1" will work.

Quoted 6 lines

You have never been able to really assume that. Disks move around.

A lot of people seem to think that controller type or location on the PCI bus should somehow have some "meaning", and that it guarantees that the disks don't move in the namespace. That's crap. You can do that in user space ("what controller are you on?") if you really really care.

So what is your solution for preventing a boot failure after disks/partitions change ?
volume labels/UUID ?

Signature · 4 lines
David Balazic
--------------
"Be excellent to each other." - Bill & Ted
- - - - - - - - - - - - - - - - - - - - - -
#1 lore raw
Quoted 3 lines

So what is your solution for preventing a boot failure after disks/partitions change ?
volume labels/UUID ?

As a sys-admin, let me add a vote for this. Having (one day) a prom monitor program that looks at all the disks, and gives a menu of which one to boot from would make life so nice.

I very often had to move disks from one platform to another, and changing ID's on the was hard or impossible in some cases, and required in others. Being able to find the disk by a label is a thousand times better.

#2 lore raw
Quoted 11 lines · [email protected] (Hacksaw) writes:
Quoted 3 lines

So what is your solution for preventing a boot failure after disks/partitions change ?
volume labels/UUID ?

As a sys-admin, let me add a vote for this. Having (one day) a prom monitor program that looks at all the disks, and gives a menu of which one to boot from would make life so nice.

I very often had to move disks from one platform to another, and changing ID's on the was hard or impossible in some cases, and required in others. Being able to find the disk by a label is a thousand times better.

Did you ever try grub?? This a gnu project, a boot-loader, with an embedded shell... You can read ext2fs and select, your kernel, your root disk, your params, etc...

Signature · 4 lines
Mathieu CHOUQUET-STRINGER              E-Mail : [email protected]
     Learning French is trivial: the word for horse is cheval, and
               everything else follows in the same way.
                        -- Alan J. Perlis
#3 lore raw
Quoted 8 lines
Quoted 4 lines

I very often had to move disks from one platform to another, and changing ID's on the was hard or impossible in some cases, and required in others. Being able to find the disk by a label is a thousand times better.

Did you ever try grub?? This a gnu project, a boot-loader, with an embedded shell... You can read ext2fs and select, your kernel, your root disk, your params, etc...

Yes I have tried it. Pretty cool. The only thing is what do you do if /boot sites ontop of a non ext2 partition?

#4 lore raw
In reply to Mathieu Chouquet-Stringer
Quoted 6 lines · James Simmons
Quoted 3 lines

Did you ever try grub?? This a gnu project, a boot-loader, with an embedded shell... You can read ext2fs and select, your kernel, your root disk, your params, etc...

Yes I have tried it. Pretty cool. The only thing is what do you do if /boot sites ontop of a non ext2 partition?

Well if it's not ext2, fat, ffs, reiserfs or minix, too bad... On what kind of partition does your /boot site?

Signature · 4 lines
Mathieu CHOUQUET-STRINGER              E-Mail : [email protected]
     Learning French is trivial: the word for horse is cheval, and
               everything else follows in the same way.
                        -- Alan J. Perlis
#5 lore raw
Quoted 11 lines · James Simmons
Quoted 6 lines
Quoted 3 lines

Did you ever try grub?? This a gnu project, a boot-loader, with an embedded shell... You can read ext2fs and select, your kernel, your root disk, your params, etc...

Yes I have tried it. Pretty cool. The only thing is what do you do if /boot sites ontop of a non ext2 partition?

Well if it's not ext2, fat, ffs, reiserfs or minix, too bad... On what kind of partition does your /boot site?

For the machines I work with

JFFS
JFFS2
XFS
Reiserfs
ext2

#6 lore raw
In reply to Mathieu Chouquet-Stringer

Last time I checked (that was 5 minutes ago :-) )only the last two ones were supported...

Quoted 19 lines · James Simmons
Quoted 11 lines · James Simmons
Quoted 6 lines
Quoted 3 lines

Did you ever try grub?? This a gnu project, a boot-loader, with an embedded shell... You can read ext2fs and select, your kernel, your root disk, your params, etc...

Yes I have tried it. Pretty cool. The only thing is what do you do if /boot sites ontop of a non ext2 partition?

Well if it's not ext2, fat, ffs, reiserfs or minix, too bad... On what kind of partition does your /boot site?

For the machines I work with

JFFS
JFFS2
XFS
Reiserfs
ext2

Signature · 4 lines
Mathieu CHOUQUET-STRINGER              E-Mail : [email protected]
     Learning French is trivial: the word for horse is cheval, and
               everything else follows in the same way.
                        -- Alan J. Perlis