Skip to contentSkip to conversation

2.4.4 kernel freeze

DISCUSSION Stephan Brauss 2 participants 2 messages May 27, 2001 – May 30, 2001

lore
Share & tools
lore
#0 lore raw
Quoted 1 line

Any other hints are welcome (other than the noapic, which didn't help).

My system is always completely dead as soon as I start a larger (interrupt driven?) data transfer to/from any (? I tested with two different NICs and a Promise Ultra100) PCI card in slot 4 or 5. And it seems that it really only occurs in slots 4 and 5... To get rid of it, I switched to 2.2.19.

#1 lore raw
Quoted 6 lines · Stephan Brauss
Quoted 1 line

Any other hints are welcome (other than the noapic, which didn't help).

My system is always completely dead as soon as I start a larger (interrupt driven?) data transfer to/from any (? I tested with two different NICs and a Promise Ultra100) PCI card in slot 4 or 5. And it seems that it really only occurs in slots 4 and 5... To get rid of it, I switched to 2.2.19.

I couldn't. Problems getting devfsd patched in 2.2.19 :-( - and I'm going on vacation in shortly...

Now after the last couple of "lost interrupts" I set a debian-stable as my primary firewall/router box in front of my server - this way I got rid of the second nic and freed both slot 4 and 5. Unfortunately, after a couple hours running my box again lost irq :-(.

And there's no obvious huge transfer going on. The boxes were just alone. Now I try again noapic (different setup). Hope that works. Otherwise I'm kind of lost...

Signature · 2 lines
Tschoe,                    Get my gpg-public-key here
 Jens                     http://gecius.de/gpg-key.txt