Skip to contentSkip to conversation

4 ports ETH cards

OFF-TOPIC Fabbione 9 participants 11 messages May 29, 2001 – May 31, 2001

lore
Share & tools
lore

Fabbione

author
#0 lore raw

Hi all,
sorry for the offtopic msg.

Can someone point me to a 4 ports fast/eth card solution for linux?

I found some cards based on the DEC 21*4* chips but when
I asked for more details I got a strange answer from the reseller like that this card is able to work only half-duplex and the chip has only one mac-address for the 4 eth cards (really strange).

Thanks a lot
Fabbione

#1 lore raw
Quoted 10 lines · On 05.29 Fabbione wrote:

Hi all,
sorry for the offtopic msg.

Can someone point me to a 4 ports fast/eth card solution for linux?

I found some cards based on the DEC 21*4* chips but when
I asked for more details I got a strange answer from the reseller like that this card is able to work only half-duplex and the chip has only one mac-address for the 4 eth cards (really strange).

Adaptec has the DuraLAN product (aka starfire). Look in their web page. Drivers are included in the kernel; for more info, look in:
http://www.scyld.com/network/starfire.html

Signature · 4 lines
J.A. Magallon                           #  Let the source be with you...        
mailto:[email protected]
Linux Mandrake release 8.1 (Cooker) for i586
Linux werewolf 2.4.5-ac3 #1 SMP Mon May 28 19:37:02 CEST 2001 i686
#2 lore raw
In reply to Fabbione
Quoted 4 lines · Fabbione

I found some cards based on the DEC 21*4* chips but when
I asked for more details I got a strange answer from the reseller like that this card is able to work only half-duplex and the chip has only one mac-address for the 4 eth cards (really strange).

This sounds like it's not a 4 port card, but a 4 port hub-card. (Eg a card with integrated 4-port hub)

-Dan

author
#3 lore raw

Hi Dan,
yes it's more or less like this. I got many mail explaining me.
I will forward the most interesting to you.

Thanks
Fabio

Quoted 11 lines · Dan Hollis
Quoted 4 lines · Fabbione

I found some cards based on the DEC 21*4* chips but when
I asked for more details I got a strange answer from the reseller like that this card is able to work only half-duplex and the chip has only one mac-address for the 4 eth cards (really strange).

This sounds like it's not a 4 port card, but a 4 port hub-card. (Eg a card with integrated 4-port hub)

-Dan

Signature · 4 lines
 Fabio Massimo Di Nitto
 Debian GNU/Linux Testing/Unstable Kernel 2.4.3
 Office for the Complication of Otherwise Simple Affairs
 PROUD TO BE MICROSOFT FREE!
#4 lore raw
In reply to Fabbione
Quoted 4 lines · Fabbione

Hi all,
sorry for the offtopic msg.

Can someone point me to a 4 ports fast/eth card solution for linux?

D-Link DFE-570 has a reasonable pricing and is well supported by the tulip driver

Quoted 4 lines

I found some cards based on the DEC 21*4* chips but when
I asked for more details I got a strange answer from the reseller like that this card is able to work only half-duplex and the chip has only one mac-address for the 4 eth cards (really strange).

nah. And even if so, you can always change the mac-address using ifconfig.

What the guy most likely wanted to say, is that there is only one EEprom containing all mac adresses for the four tulip chips, which I have seen on multiple boards

Quoted 2 lines

Thanks a lot
Fabbione

Signature · 5 lines
Live long and prosper
- Harald Welte / [email protected]               http://www.gnumonks.org/
============================================================================
GCS/E/IT d- s-: a-- C+++ UL++++$ P+++ L++++$ E--- W- N++ o? K- w--- O- M- 
V-- PS+ PE-- Y+ PGP++ t++ 5-- !X !R tv-- b+++ DI? !D G+ e* h+ r% y+(*)
#5 lore raw
In reply to Fabbione
Quoted 8 lines · Harald Welte
Quoted 4 lines · Fabbione

Hi all,
sorry for the offtopic msg.

Can someone point me to a 4 ports fast/eth card solution for linux?

D-Link DFE-570 has a reasonable pricing and is well supported by the tulip driver

Just got three of these suckers and I'm about to order a bunch
more (happy camper)...

Quoted 6 lines
Quoted 4 lines

I found some cards based on the DEC 21*4* chips but when
I asked for more details I got a strange answer from the reseller like that this card is able to work only half-duplex and the chip has only one mac-address for the 4 eth cards (really strange).

nah. And even if so, you can always change the mac-address using ifconfig.

Each D-Link card has four MAC addresses (sequential). I doubt
other manufactures are any different.

Quoted 3 lines

What the guy most likely wanted to say, is that there is only one EEprom containing all mac adresses for the four tulip chips, which I have seen on multiple boards

What the guy was doing was having a bad case of optical rectitus.
That would be typical of a "reseller" (AKA Salesman). Most would not even have a CLUE that the cards were based on the tulip chipset / driver.

Because the D-Link cards were less than half of the nearest
competitor [ < $180 vs > $360 for others and Compac was > $2400! ] I ordered only three not knowing for sure if they would work. Turned on the tulip driver and them suckers fired right up. Now I know they work, stock, right out of the box, and I can order a bunch more for the lab I'm working with.

Quoted 6 lines
Quoted 2 lines

Thanks a lot
Fabbione

Signature · 2 lines
Live long and prosper
- Harald Welte / [email protected]               http://www.gnumonks.org/

Mike

Signature · 4 lines
 Michael H. Warfield    |  (770) 985-6132   |  [email protected]
  (The Mad Wizard)      |  (678) 463-0932   |  http://www.wittsend.com/mhw/
  NIC whois:  MHW9      |  An optimist believes we live in the best of all
 PGP Key: 0xDF1DD471    |  possible worlds.  A pessimist is sure of it!
#7 lore raw
In reply to Fabbione
Quoted 32 lines · Michael H. Warfield
Quoted 8 lines · Harald Welte
Quoted 4 lines · Fabbione

Hi all,
sorry for the offtopic msg.

Can someone point me to a 4 ports fast/eth card solution for linux?

D-Link DFE-570 has a reasonable pricing and is well supported by the tulip driver

Just got three of these suckers and I'm about to order a bunch
more (happy camper)...

Quoted 6 lines
Quoted 4 lines

I found some cards based on the DEC 21*4* chips but when
I asked for more details I got a strange answer from the reseller like that this card is able to work only half-duplex and the chip has only one mac-address for the 4 eth cards (really strange).

nah. And even if so, you can always change the mac-address using ifconfig.

Each D-Link card has four MAC addresses (sequential). I doubt
other manufactures are any different.

Quoted 3 lines

What the guy most likely wanted to say, is that there is only one EEprom containing all mac adresses for the four tulip chips, which I have seen on multiple boards

What the guy was doing was having a bad case of optical rectitus.
That would be typical of a "reseller" (AKA Salesman). Most would not even have a CLUE that the cards were based on the tulip chipset / driver.

Quoted 7 lines

Because the D-Link cards were less than half of the nearest
competitor [ < $180 vs > $360 for others and Compac was > $2400! ] I ordered only three not knowing for sure if they would work. Turned on the tulip driver and them suckers fired right up. Now I know they work, stock, right out of the box, and I can order a bunch more for the lab I'm working with.

I've been working with these boards for a couple months and thought they were great. However, now it turns out that they won't fit into our systems too well (a little too long). Does anyone have knowledge of another brand that has a (slightly) smaller form factor? I did some checking on Pricewatch but wasn't able to find anything that fit our needs.

TIA,

-Jeff

Signature · 2 lines
Jeff Golds
[email protected]
#6 lore raw
In reply to Michael H. Warfield

On Wed, 30 May 2001, Michael H. Warfield wrote:

[snip]

Quoted 2 lines

Just got three of these suckers and I'm about to order a bunch
more (happy camper)...

yes the Dlink DFE570-TX is a very nice card indeed.

[snip]

Quoted 6 lines

Because the D-Link cards were less than half of the nearest
competitor [ < $180 vs > $360 for others and Compac was > $2400! ] I ordered only three not knowing for sure if they would work. Turned on the tulip driver and them suckers fired right up. Now I know they work, stock, right out of the box, and I can order a bunch more for the lab I'm working with.

I use those cards in all routers here and they work extremely well. But I don't use the standard vanilla tulip driver that's in the official kernel. I use an optimized version that handled high traffic volumes much better, it decreases the interrupt-load quite a lot. (this driver is about to be merged with the standard tulip driver IIRC)
I havn't had any problems with these cards so I can really recommend them.

/Martin

#8 lore raw
In reply to Jeff Golds
Quoted 10 lines

I've been working with these boards for a couple months and thought they were great. However, now it turns out that they won't fit into our systems too well (a little too long). Does anyone have knowledge of another brand that has a (slightly) smaller form factor? I did some checking on Pricewatch but wasn't able to find anything that fit our needs.

TIA,

-Jeff

The Adaptec Quartet64 boards worked ok for me with 2.2 and the Starfire driver. Not sure if they are smaller (shorter) than the D-Link but they sure are a lot shorter than the old Tulip-based Adaptec quad boards. They are a bit pricey, though.

author
#9 lore raw
In reply to Fabbione

First of all I would like to say thanks to everyone. I didn't expect so many answer in so few time ( I got most of them directly in my mailbox)

Anyway I've ordered right now the D-Link DFE-570 that seems the one with the best price/quality ratio so I can test it on the "battle field".

Best Regards
Fabio

Signature · 4 lines
 Fabio Massimo Di Nitto
 Debian GNU/Linux Testing/Unstable Kernel 2.4.5
 Office for the Complication of Otherwise Simple Affairs
 PROUD TO BE MICROSOFT FREE!
#10 lore raw
In reply to Fabbione
Quoted 2 lines

Because the D-Link cards were less than half of the nearest
competitor [ < $180 vs > $360 for others and Compac was > $2400! ] I

I have to comment on this one, the Compaq cards (NC3131 and NC3134) are ~$210 and come with two ports, upgradable with another 2 port module (daughterboard) you have a choice of 2 more 100mbit ports ($233) or 1 gigabit port ($500), perhaps you were under the influence of drugs, or the salesperson was. (btw, it uses the eepro100 driver, which, in my experience, is very stable.)

Matthew S. Hallacy

Quoted 5 lines
Signature · 4 lines
 Michael H. Warfield    |  (770) 985-6132   |  [email protected]
  (The Mad Wizard)      |  (678) 463-0932   |  http://www.wittsend.com/mhw/
  NIC whois:  MHW9      |  An optimist believes we live in the best of all
 PGP Key: 0xDF1DD471    |  possible worlds.  A pessimist is sure of it!