2.4 freezes on VIA KT133 -- mine FIXED
Quoted 5 lines · Mark Hahn
Quoted 2 lines
Quoted 2 lines
contrary to the implication here, I don't believe there is any *general* problem with Linux/VIA/AMD stability. there are well-known issues
...
Quoted 2 lines
VIA hardware is not suitable for anything until we _know_ the truth about what is wrong. VIA is hiding something big.
<snip>
Quoted 3 lines
afaik, there are absolutely zero problems reported with kt133-no-a machines, for instance. mine has certainly worked flawlessly for a long time, on most every 2.3/2.4 kernel over the past year+.
FWIW, I'm shaking down a 8.5*100 T'bird VIA VT8363 (no "A") Northbridge & VT82C686A (Southbridge). KT133 no A. No HPT366.
I had terrible read errors on a single UDMA66 HD: one in 5 md5sums
on an unmounted 1.5 GB partition was different. WD Diags said
drives were good (sectors verified OK). Swapped PS, RAM, HDs, cables, PCI cards, 2.2/2.4/FreeBSD kernels, nothing helped ...
... until I slowed the SDRAM down from the PC133 (it really _is_ and passes memtest-86 and my burnMMX) down to PC100. At least UDMA is still working, even if my RAM is decidedly slower. YMMV
I've now tested 9 hrs copying a 500 MB file back and forth on the same drive without error. 21 hrs copying back and forth and md5sum'ing from /dev/hdc3 [UDMA66] is OK too.
-- Robert author cpuburn http://users.ev1.net/~redelm