Problems with mips2 compiled libc and linux 2.4.3
It seems that this check(in asm-mips/elf.h):
#define elf_check_arch(hdr)
\
({
\
int __res = 1;
\
struct elfhdr *__h = (hdr);\
\
if ((__h->e_machine != EM_MIPS) &&
\
(__h->e_machine != EM_MIPS_RS4_BE))
\
__res = 0;
\
if (__h->e_flags & EF_MIPS_ARCH)
\
__res = 0;\
\
__res;\
})
which is called in fs/binfmt_elf.c causes the loading of init to fail if
it is linked with a glibc compiled with -mips2. It is the second if test
which fails if any of the high 4 bits in the flags are set. According to the
specs these are set for the various mipsx (x != 1) flavors - this seems to mean
that we do no allow anything higher than mips1 run on linux - can this be
true? If so, why?
/Brian
Quoted 2 lines · Brian Murphy
it is linked with a glibc compiled with -mips2. It is the second if test
I patched my kernel to get around it.
Quoted 9 lines
which fails if any of the high 4 bits in the flags are set. According to the
specs these are set for the various mipsx (x != 1) flavors - this seemsto mean
that we do no allow anything higher than mips1 run on linux - can this be
true? If so, why?
There is no very good reason. I think we should add a MIPS ISA level field in the mips cpuinfo so that we can check what ISA the hardware support at the run-time.
H.J.
Quoted 11 lines · Brian Murphy
if (__h->e_flags & EF_MIPS_ARCH) \ __res = 0;which is called in
fs/binfmt_elf.ccauses the loading of init to fail if it is linked with a glibc compiled with -mips2. It is the second if test which fails if any of the high 4 bits in the flags are set. According to the specs these are set for the various mipsx (x != 1) flavors - this seems to mean that we do no allow anything higher than mips1 run on linux - can this be
true? If so, why?
Older binutils didn't use to set these flags but SGI's ld did so this was a heuristc to reject IRIX binaries which are handled by irixelf.c. The fix is simple, just remove above test.
Time to come up with some other plan to detec IRIX binaries ...
Ralf
Quoted 7 lines · Ralf Baechle
Quoted 3 lines · Brian Murphy
if (__h->e_flags & EF_MIPS_ARCH) \ __res = 0;
Will this be removed from the cvs version then?
With all the talk of ll/sc and mips 1 and 2 in the last few months how has anyone tested/run with a mips2 libc if this test existed in their kernel?
/Brian
Quoted 4 lines · H . J . Lu
Quoted 3 lines
which fails if any of the high 4 bits in the flags are set. According to the
specs these are set for the various mipsx (x != 1) flavors - this seems
Quoted 8 lines
Quoted 4 lines
to mean
that we do no allow anything higher than mips1 run on linux - can this be
true? If so, why?There is no very good reason. I think we should add a MIPS ISA level field in the mips cpuinfo so that we can check what ISA the hardware support at the run-time.
Yes and no. It would be nice but the available flags are not an suitable representation of processor capabilities.
Ralf