Tulip driver doesn't work as module on 2.4.6
Hi
With Kernel 2.4.6, when I compile the Tulip driver as a module, I don't have network connectivity. I can ping myself, and netstat -rn gives the same table as with earlier kernels, but I can't connect to any of the other computers on my network. (network = 1 pentium 120, and 1 pentium 133 running a 2.2.16 and a 2.0.36 kernel respectively.) (the module is loaded correctly and I have all the correct levels of support programs as listed in the Changes file.) When I compile the Tulip driver directly into the Kernel, it works.
I would be happy to provide more information to anybody who wants to try to figure this one out, just ask me what you need to know.
Thanks
John Kacur
Quoted 16 lines · John Kacur
Hi
With Kernel 2.4.6, when I compile the Tulip driver as a module, I don't have network connectivity. I can ping myself, and netstat -rn gives the same table as with earlier kernels, but I can't connect to any of the other computers on my network. (network = 1 pentium 120, and 1 pentium 133 running a 2.2.16 and a 2.0.36 kernel respectively.) (the module is loaded correctly and I have all the correct levels of support programs as listed in the Changes file.) When I compile the Tulip driver directly into the Kernel, it works.
I would be happy to provide more information to anybody who wants to try to figure this one out, just ask me what you need to know.
Thanks
Quoted 8 lines
John Kacur
[email protected]
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
I haven't had this problem. I did my compile last p.m. and so far my Compaq Deskpro is running better than ever. Which tulip based card are you running? Mine is a Linksys 10/100. More detail please. I'm doing a modular load also.
Greg Rollins
[email protected]
Quoted 6 lines · Frank Davis
John,
What do the logs say?
Regards,
-Frank
--
Jul 5 23:32:48 speedy kudzu: failed Jul 5 23:32:48 speedy kudzu: Hardware configuration timed out. Jul 5 23:32:48 speedy kudzu: Run '/usr/sbin/kudzu' from the command line to re- detect. Jul 5 23:32:48 speedy sysctl: net.ipv4.ip_forward = 0 Jul 5 23:32:53 speedy lpd: lpd startup succeeded Jul 5 23:32:48 speedy sysctl: net.ipv4.conf.all.rp_filter = 1 Jul 5 23:32:48 speedy sysctl: error: 'net.ipv4.ip_always_defrag' is an unknown key Jul 5 23:32:48 speedy sysctl: error: 'kernel.sysrq' is an unknown key Jul 5 23:32:48 speedy network: Setting network parameters succeeded Jul 5 23:32:49 speedy network: Bringing up interface lo succeeded Jul 5 23:32:49 speedy network: Bringing up interface eth0 succeeded Jul 5 23:32:50 speedy portmap: portmap startup succeeded
Quoted 28 lines · Greg Rollins
Quoted 16 lines · John Kacur
Hi
With Kernel 2.4.6, when I compile the Tulip driver as a module, I don't have network connectivity. I can ping myself, and netstat -rn gives the same table as with earlier kernels, but I can't connect to any of the other computers on my network. (network = 1 pentium 120, and 1 pentium 133 running a 2.2.16 and a 2.0.36 kernel respectively.) (the module is loaded correctly and I have all the correct levels of support programs as listed in the Changes file.) When I compile the Tulip driver directly into the Kernel, it works.
I would be happy to provide more information to anybody who wants to try to figure this one out, just ask me what you need to know.
Thanks
Quoted 8 lines
John Kacur
[email protected]
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Quoted 8 lines
I haven't had this problem. I did my compile last p.m. and so far my Compaq Deskpro is running better than ever. Which tulip based card are you running? Mine is a Linksys 10/100. More detail please. I'm doing a modular load also.
Greg Rollins
[email protected]
Mine is also a Linksys 10/100