Skip to contentSkip to conversation

generic ramdisk support

PATCH Pete Popov 2 participants 2 messages Jul 20, 2001 MIPS

lore
Share & tools
lore

Pete Popov

author
#0 lore raw

Any reason why we don't have a single directory for a ramdisk linker script and Makefile? I've attached that does that. You just put a ramdisk.gz image in arch/mips/ramdisk and turn on initrd support. At somepoint I'll upload some useful ramdisks to the sourceforge linux-mips anonymous ftp site.

Pete

arch/mips/Makefile +10 -0
diff -Naur --exclude=CVS linux-mips-dev-orig/arch/mips/Makefile linux-mips-dev/arch/mips/Makefile
@@ -90,6 +90,16 @@
 CORE_FILES	+=arch/mips/math-emu/fpu_emulator.o
 SUBDIRS		+=arch/mips/math-emu
 
+# 
+# ramdisk/initrd support
+# You need a compressed ramdisk image, named ramdisk.gz in
+# arch/mips/ramdisk
+#
+ifdef CONFIG_BLK_DEV_INITRD 
+CORE_FILES      += arch/mips/ramdisk/ramdisk.o
+SUBDIRS		+= arch/mips/ramdisk
+endif
+
 #
 # Board-dependent options and extra files
 #
arch/mips/ramdisk/Makefile +22 -0
diff -Naur --exclude=CVS linux-mips-dev-orig/arch/mips/ramdisk/Makefile linux-mips-dev/arch/mips/ramdisk/Makefile
@@ -0,0 +1,22 @@
+#
+# Makefile for a ramdisk image
+#
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+#
+
+ifdef CONFIG_CPU_LITTLE_ENDIAN
+output-format   = elf32-tradlittlemips
+else
+output-format   = elf32-tradbigmips
+endif
+
+ramdisk.o: ramdisk.gz ld.script
+	$(LD) -T ld.script -b binary -o $@ ramdisk.gz
+
+ld.script: $(TOPDIR)/arch/$(ARCH)/ramdisk/ld.script.in
+	sed 's/@@OUTPUT_FORMAT@@/$(output-format)/' <$< >$@
+
+include $(TOPDIR)/Rules.make
+
arch/mips/ramdisk/ld.script.in +10 -0
diff -Naur --exclude=CVS linux-mips-dev-orig/arch/mips/ramdisk/ld.script.in linux-mips-dev/arch/mips/ramdisk/ld.script.in
@@ -0,0 +1,10 @@
+OUTPUT_FORMAT("@@OUTPUT_FORMAT@@")
+OUTPUT_ARCH(mips)
+SECTIONS
+{
+  .initrd :
+  {
+  	*(.data)
+  }
+}
+
#1 lore raw
Quoted 7 lines · Pete Popov

Any reason why we don't have a single directory for a ramdisk linker script and Makefile? I've attached that does that. You just put a ramdisk.gz image in arch/mips/ramdisk and turn on initrd support. At somepoint I'll upload some useful ramdisks to the sourceforge linux-mips anonymous ftp site.

This is a good idea. People don't have to maintain a separate script to generate the ram root fs.

BTW, I created 1.4 MB busybox ram fs for mips-le. You can find it at

	http://65.5.25.179/linux.

Jun