Skip to contentSkip to conversation

different outputs in LVM tools (bug?)

linux-lvm Julien Baboud 2 participants 2 messages Jul 25, 2001

lore
Share & tools
lore
#0 lore raw

hi,

I'm using the 0.9.1 beta 7 version, and I have encountered a problem
(but perhaps it is not) with the LVM tools :
when I use the 'vgdisplay' command I obtain this :

--- Volume group ---

VG Name               vg1
VG Access             read/write
VG Status             available/resizable
VG #                  0
MAX LV                256
Cur LV                4
Open LV               0
MAX LV Size           255.99 GB
Max PV                256
Cur PV                2
Act PV                2
VG Size               1000 MB
PE Size               4 MB
Total PE              250
Alloc PE / Size       100 / 400 MB
Free  PE / Size       150 / 600 MB
VG UUID               qnJMzM-yuCq-N59y-cTey-kayU-9Wo3-hGILhU

and with the 'vgdisplay -c' command, the output is :

vg1:3:5:0:256:4:0:268427264:256:2:2:1024000:8192:250:100:150:qnJMzM-yuCq-N59y-cTey-kayU-9Wo3-hGILhU

                                            ----

The difference is in the 'PE Size' field : in the first we have 4 MB and in the second 8192 (ie : 8 MB)
Is this a known bug or is there any explanation ?

Julien,
4 Atix

#1 lore raw
Quoted 26 lines · Julien Baboud

hi,

I'm using the 0.9.1 beta 7 version, and I have encountered a problem
(but perhaps it is not) with the LVM tools :
when I use the 'vgdisplay' command I obtain this :

--- Volume group ---

VG Name               vg1
VG Access             read/write
VG Status             available/resizable
VG #                  0
MAX LV                256
Cur LV                4
Open LV               0
MAX LV Size           255.99 GB
Max PV                256
Cur PV                2
Act PV                2
VG Size               1000 MB
PE Size               4 MB
Total PE              250
Alloc PE / Size       100 / 400 MB
Free  PE / Size       150 / 600 MB
VG UUID               qnJMzM-yuCq-N59y-cTey-kayU-9Wo3-hGILhU
Quoted 8 lines

and with the 'vgdisplay -c' command, the output is :

vg1:3:5:0:256:4:0:268427264:256:2:2:1024000:8192:250:100:150:qnJMzM-yuCq-N59y-cTey-kayU-9Wo3-hGILhU

                                            ----

The difference is in the 'PE Size' field : in the first we have 4 MB and in the second 8192 (ie : 8 MB)
Is this a known bug or is there any explanation ?

Julien,

internally LVM uses units of 512 byte -> 8192 * 512 byte == 4 MB.

Quoted 9 lines

Julien,
4 Atix
_______________________________________________
linux-lvm mailing list
[email protected]
http://lists.sistina.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html

Signature · 15 lines
Regards,
Heinz    -- The LVM Guy --

*** Software bugs are stupid.
    Nevertheless it needs not so stupid people to solve them ***

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

Heinz Mauelshagen                                 Sistina Software Inc.
Senior Consultant/Developer                       Am Sonnenhang 11
                                                  56242 Marienrachdorf
                                                  Germany
[email protected]                           +49 2626 141200
                                                       FAX 924446
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-