Mulitple 3c509 cards 2.4.x Kernel
Quoted 2 lines · William
Did you configure your cards (ie. IRQ, IO) using DOS driver or '
3c5x9setup.c'?
Both cards were configured as non-pnp to use the irq/io mentioned earlier(10,0x280,3,0x300).
Quoted 1 line · Alan
Try ether=3,0x300,0,0,eth0,10,0x280,0,0,eth1
The ether fix did not work.
dmesg shows no isapnp devices found. /proc/ioports and /proc/interrupts show the card that is found and that the other ioport and interrupt are unused.