Skip to contentSkip to conversation

Installing rtlinux on mpc860 board

DISCUSSION Kapil Konde 2 participants 5 messages Aug 7, 2001 – Aug 8, 2001

lore
Share & tools
lore
#0 lore raw

Hi All,
I am new to rtlinux. I want to install rtlinux on mpc860 board.
I have a mpc860T mdppro board. Can somebody guide me on which rtlinux I should use and what are the steps that I will require to perform to install the rtlinux on board.

Thanks in advance,
Kapil.

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

#1 lore raw
Quoted 5 lines · In message <[email protected]> you wrote:

I am new to rtlinux. I want to install rtlinux on mpc860 board.
I have a mpc860T mdppro board. Can somebody guide me on which rtlinux I should use and what are the steps that I will require to perform to install the rtlinux on board.

We have a patch for RTLinux-3.0 on our FTP server, as well as a kernel that is known to work with this patch (there are other, newer kernel versions as well, but these might need a little work adapting the patch). Included with the patch comes a `README.DENX' with detailed description of the patch and installation procedure.

Please note that there is also a patch for RTAI-24.1.4. We will maintain RTAI support in the future, but may (or may not) drop support for RTLinux (no technical reasons, just because of the patent issue).

Please see:
ftp://ftp.denx.de/pub/LinuxPPC/usr/src/linux-2.4.4-2001-05-12.tar.bz2 ftp://ftp.denx.de/pub/LinuxPPC/usr/src/rtlinux-3.0-denx.tar.bz2 ftp://ftp.denx.de/pub/LinuxPPC/usr/src/rtai-24.1.4-denx.tar.bz2 and maybe:
ftp://ftp.denx.de/pub/LinuxPPC/usr/src/linux-2.4.4-2001-07-23.tar.bz2

Hope this helps,

Wolfgang Denk

--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: [email protected]
Weekends were made for programming. - Karl Lehenbauer

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

#2 lore raw

Hi,
Thanks for reply. I downloaded the rtlinux kernel you suggested and
patched it from your ftp site. After I configured it and tried to do "make dep" it gave me error "llinux/limits.h no such file or directory" in scripts/mkdep.c . I have extracted the sources in my home directory. Is it necessry that I should extract it under /usr/src/linux or I am missing something.
Also I am a littlebit confused about what machine type I should
select for my mdppro board.

Thanks and regards,
Kapil.

Quoted 25 lines · Wolfgang Denk
Quoted 5 lines · In message <[email protected]> you wrote:

I am new to rtlinux. I want to install rtlinux on mpc860 board.
I have a mpc860T mdppro board. Can somebody guide me on which rtlinux I should use and what are the steps that I will require to perform to install the rtlinux on board.

We have a patch for RTLinux-3.0 on our FTP server, as well as a kernel that is known to work with this patch (there are other, newer kernel versions as well, but these might need a little work adapting the patch). Included with the patch comes a `README.DENX' with detailed description of the patch and installation procedure.

Please note that there is also a patch for RTAI-24.1.4. We will maintain RTAI support in the future, but may (or may not) drop support for RTLinux (no technical reasons, just because of the patent issue).

Please see:
ftp://ftp.denx.de/pub/LinuxPPC/usr/src/linux-2.4.4-2001-05-12.tar.bz2 ftp://ftp.denx.de/pub/LinuxPPC/usr/src/rtlinux-3.0-denx.tar.bz2 ftp://ftp.denx.de/pub/LinuxPPC/usr/src/rtai-24.1.4-denx.tar.bz2 and maybe:
ftp://ftp.denx.de/pub/LinuxPPC/usr/src/linux-2.4.4-2001-07-23.tar.bz2

Quoted 8 lines

Hope this helps,

Wolfgang Denk

--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: [email protected]
Weekends were made for programming. - Karl Lehenbauer

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

#3 lore raw

Sorry, I found that I had invalid link in my usr/src.

However when I do a meke xconfig I do not see any option like "RTLinux kernel extension" in platform support.

Thanks and regards,
Kapil

Quoted 10 lines · Kapil Konde

Hi,
Thanks for reply. I downloaded the rtlinux kernel you suggested and
patched it from your ftp site. After I configured it and tried to do "make dep" it gave me error "llinux/limits.h no such file or directory" in scripts/mkdep.c . I have extracted the sources in my home directory. Is it necessry that I should extract it under /usr/src/linux or I am missing something.
Also I am a littlebit confused about what machine type I should
select for my mdppro board.

Quoted 38 lines

Thanks and regards,
Kapil.

Quoted 33 lines · Wolfgang Denk
Quoted 5 lines · In message <[email protected]> you wrote:

I am new to rtlinux. I want to install rtlinux on mpc860 board.
I have a mpc860T mdppro board. Can somebody guide me on which rtlinux I should use and what are the steps that I will require to perform to install the rtlinux on board.

We have a patch for RTLinux-3.0 on our FTP server, as well as a kernel that is known to work with this patch (there are other, newer kernel versions as well, but these might need a little work adapting the patch). Included with the patch comes a `README.DENX' with detailed description of the patch and installation procedure.

Please note that there is also a patch for RTAI-24.1.4. We will maintain RTAI support in the future, but may (or may not) drop support for RTLinux (no technical reasons, just because of the patent issue).

Please see:
ftp://ftp.denx.de/pub/LinuxPPC/usr/src/linux-2.4.4-2001-05-12.tar.bz2 ftp://ftp.denx.de/pub/LinuxPPC/usr/src/rtlinux-3.0-denx.tar.bz2 ftp://ftp.denx.de/pub/LinuxPPC/usr/src/rtai-24.1.4-denx.tar.bz2 and maybe:
ftp://ftp.denx.de/pub/LinuxPPC/usr/src/linux-2.4.4-2001-07-23.tar.bz2

Hope this helps,

Wolfgang Denk

--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: [email protected]
Weekends were made for programming. - Karl Lehenbauer

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

#4 lore raw
Quoted 3 lines · In message <[email protected]> you wrote:

However when I do a meke xconfig I do not see any option like "RTLinux kernel extension" in platform support.

"make xconfig" is broken. Use "make menuconfig" instead.

Wolfgang Denk

--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: [email protected] The human mind ordinarily operates at only ten percent of its capacity. The rest is overhead for the operating system.

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/