Skip to contentSkip to conversation

ipmi inventory

DISCUSSION Vijay Khemka 2 participants 3 messages Oct 18, 2018

lore
Share & tools
lore
#0 lore raw

Hi,
I am trying to find reference to entityID defined in config.yaml for ipmi unventory map. I see different value of entityID for different sections. Is there any documentation which defines what should be entityID and instance for each section.

Regards
-Vijay

#1 lore raw

From the spec:

"Indicates the physical entity that the sensor is monitoring or is otherwise associated with the sensor. See Table 43-, Entity ID Codes."

Header for that table:

"The Entity ID field is used for identifying the physical entity that a sensor or device is associated with. If multiple
sensors refer to the same entity, they will have the same Entity ID field value. For example, if a voltage sensor
and a temperature sensor are both for a ‘Power Supply 1’ entity the Entity ID in their sensor data records would
both be 10 (0Ah), per the Entity ID table."

Check out the spec on your own for the table. It starts on page 550 as written in the pdf (although the file itself puts that on page 576)

Quoted 13 lines · Vijay Khemka

Hi,

I am trying to find reference to entityID defined in config.yaml for ipmi unventory map. I see different value of entityID for different sections. Is there any documentation which defines what should be entityID and instance for each section.

Regards

-Vijay

#2 lore raw

Thanks Emily.

From: Emily Shaffer <[email protected]>
Date: Thursday, October 18, 2018 at 1:38 PM
To: Vijay Khemka <[email protected]>
Cc: "[email protected]" <[email protected]>, Brad Bishop <[email protected]>
Subject: Re: ipmi inventory

From the spec:
"Indicates the physical entity that the sensor is monitoring or is otherwise associated with the sensor. See Table 43-, Entity ID Codes."

Header for that table:

"The Entity ID field is used for identifying the physical entity that a sensor or device is associated with. If multiple sensors refer to the same entity, they will have the same Entity ID field value. For example, if a voltage sensor and a temperature sensor are both for a ‘Power Supply 1’ entity the Entity ID in their sensor data records would both be 10 (0Ah), per the Entity ID table."

Check out the spec on your own for the table. It starts on page 550 as written in the pdf (although the file itself puts that on page 576)

On Thu, Oct 18, 2018 at 1:33 PM Vijay Khemka <[email protected]<mailto:[email protected]>> wrote:
Hi,
I am trying to find reference to entityID defined in config.yaml for ipmi unventory map. I see different value of entityID for different sections. Is there any documentation which defines what should be entityID and instance for each section.

Regards
-Vijay