Error 3c900 driver in 2.2.19?
A message that is not in the archive (sent off-list or not yet received): [email protected]
But...
I haven't seen the problem before 2.2.19. Going back to 2.2.16 solved it
Quoted 36 lines · Andrew Morton
Well, it shouldn't hang - it should just fail to do anything for a while and then recover.
You can reserve more memory for the network driver by altering the contents of
/proc/sys/vm/freepages. Try doubling everything in there.Quoted 25 lines · Roy Sigurd Karlsbakk
Hi
I have a 3c900 card in a server, and after upgrading to 2.2.19 it started hanging every now and then, giving me the error message "kernel: eth0:
memory shortage". The card is this (as reported during boot)3c59x.c:v0.99H 27May00 Donald Becker
http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
eth0: 3Com 3c900 Boomerang 10Mbps Combo at0xa800, 00:a0:24:ef:ef:50, IRQ 5
8K word-wide RAM 3:5 Rx:Tx split, 10baseT interface.
Enabling bus-master transmits and whole-frame receives.Please cc: to me ([email protected]) and Jannik ([email protected]), as we're not on the list.
Best regards
roy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/