natsemi.c (linux 2.4.9) - Something Wicked happened! 18000
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Quoted 4 lines
After
installing the driver module for this card and connecting with a cross-cable to another card (tested with 10Mbps 3com509 and 100Mbps IntelPro) after the first ping a get the error:
Which compiler do you use?
gcc-2.95-1 is known to miscompile the current linux driver, and at least one 2.95-2 prerelease snapshot.
egcs-1.1.2 and gcc-2.96-85 are ok.
I've just stress tested the driver from 2.4.9 - no problems at all. 9 MB/s receive, 7 MB/s send with Cyrix 6x68L 120MHz.
I have a workaround, but probably upgrading gcc is the better solution.
--
Manfred
Quoted 2 lines
Which compiler do you use?
gcc-2.95-1 is known to miscompile the current linux driver, and at least
i'm using gcc 2.95.2 (from debian stable) and i saw a post about that but it made me belive it was fixed at the time. My mistake!
Quoted 5 lines
Quoted 2 lines
Which compiler do you use?
gcc-2.95-1 is known to miscompile the current linux driver, and at leasti'm using gcc 2.95.2 (from debian stable) and i saw a post about that but it made me belive it was fixed at the time. My mistake!
yes - check that before we go any further :)