USB device not accepting new address
Hello,
I have just come across another USB address problem, which happens sporadically and is not easy to reproduce. It happens sometimes during bootup and is unrelated to port overpowering, at other times everything works well. Output below. The USB driver is the JE-driver.
Regards,
-Udo.
uhci.c: root-hub INT complete: port1: 58a port2: 49b data: 6hub.c: port 1 connection changehub.c: port 1, portstatus 300, change 3, 1.5 Mb/shub.c: port 2 connection changehub.c: port 2, portstatus 101, change 3, 12 Mb/shub.c: port 2, portstatus 103, change 0, 12 Mb/shub.c: USB new device connect on bus1/2, assigned device number 2uhci.c: root-hub INT complete: port1: 58a port2: 49b data: 6usb.c: kmalloc IF c14bbe80, numif 1usb.c: new device strings: Mfr=0, Product=0, SerialNumber=0hub.c: USB hub foundhub.c: 5 ports detectedhub.c: standalone hubhub.c: individual port power switchinghub.c: individual port over-current protectionhub.c: Port indicators are not supportedhub.c: power on to power good time: 100mshub.c: hub controller current requirement: 100mAhub.c: port removable status: RRRRRhub.c: local power source is goodhub.c: no over-current condition existshub.c: enabling power on all portsuhci.c: root-hub INT complete: port1: 588 port2: 495 data: 2usb.c: hub driver claimed interface c14bbe80usb.c: kusbd: /sbin/hotplug add 2usb.c: kusbd policy returned 0xfffffffehub.c: port 1 enable change, status 300hub.c: port 1 connection changehub.c: port 1, portstatus 101, change 1, 12 Mb/shub.c: port 1, portstatus 103, change 10, 12 Mb/shub.c: USB new device connect on bus1/2/1, assigned device number 3uhci.c: uhci_result_control() failed with status 440000
[cfee30c0] link (0fee3062) element (0fefa240)
Element != First TD
0: [cfefa210] link (0fefa240) e3 Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=014bbf00)
1: [cfefa240] link (00000001) e0 IOC Stalled CRC/Timeo Length=7ff MaxLen=7ff DT1 EndPt=0 Dev=0, PID=69(IN) (buf=00000000)
usb.c: USB device not accepting new address=3 (error=-84) uhci.c: root-hub INT complete: port1: 58a port2: 49b data: 6 hub.c: port 1, portstatus 103, change 10, 12 Mb/shub.c: USB new device connect on bus1/2/1, assigned device number 4 usb.c: kmalloc IF c15a0140, numif 1usb.c: skipped 1 class/vendor specific interface descriptors usb.c: new device strings: Mfr=4, Product=14, SerialNumber=56 usb.c: USB device number 4 default language ID 0x409 uhci.c: root-hub INT complete: port1: 58a port2: 49b data: 6
Manufacturer: EIZO
Product: EIZO USB HID Monitor
SerialNumber: 23710050uhci.c: root-hub INT complete: port1: 58a port2: 49b data: 6 uhci.c: root-hub INT complete: port1: 58a port2: 49b data: 6 uhci.c: root-hub INT complete: port1: 58a port2: 49b data: 6 uhci.c: root-hub INT complete: port1: 58a port2: 49b data: 6 uhci.c: root-hub INT complete: port1: 58a port2: 49b data: 6 uhci.c: root-hub INT complete: port1: 58a port2: 49b data: 6 uhci.c: root-hub INT complete: port1: 58a port2: 49b data: 6 uhci.c: root-hub INT complete: port1: 58a port2: 49b data: 6 uhci.c: root-hub INT complete: port1: 58a port2: 49b data: 6 uhci.c: root-hub INT complete: port1: 58a port2: 49b data: 6 uhci.c: root-hub INT complete: port1: 58a port2: 49b data: 6
hiddev0: USB HID v1.10 Device [EIZO EIZO USB HID Monitor] on usb1:4.0 usb.c: hid driver claimed interface c15a0140usb.c: kusbd: /sbin/hotplug add 4usb.c: kusbd policy returned 0xfffffffehub.c: port 1 connection changehub.c: port 1, portstatus 300, change 3, 1.5 Mb/shub.c: port 2 connection changehub.c: port 2, portstatus 101, change 3, 12 Mb/shub.c: port 2, portstatus 103, change 0, 12 Mb/shub.c: USB new device connect on bus2/2, assigned device number 2 usb.c: kmalloc IF c15a0dc0, numif 1usb.c: new device strings: Mfr=1, Product=2, SerialNumber=0 usb.c: USB device number 2 default language ID 0x409
Manufacturer: ALCOR
Product: Generic USB Hubhub.c: USB hub foundhub.c: 4 ports detectedhub.c: standalone hubhub.c: ganged power switchinghub.c: global over-current protectionhub.c: Port indicators are not supportedhub.c: power on to power good time: 44mshub.c: hub controller current requirement: 100mAhub.c: port removable status: RRRRhub.c: local power source is goodhub.c: no over-current condition existshub.c: enabling power on all portsusb.c: hub driver claimed interface c15a0dc0usb.c: kusbd: /sbin/hotplug add 2usb.c: kusbd policy returned 0xfffffffeuhci.c: root-hub INT complete: port1: 588 port2: 495 data: 2 hub.c: port 1 enable change, status 300
Quoted 7 lines · Udo A. Steinberg
Hello,
I have just come across another USB address problem, which happens sporadically and is not easy to reproduce. It happens sometimes during bootup and is unrelated to port overpowering, at other times everything works well. Output below. The USB driver is the JE-driver.
What kernel is this?
What happens when you use the usb-uhci.o driver?
greg k-h
Quoted 3 lines
Quoted 1 line · Greg KH
What happens when you use the usb-uhci.o driver?
With the usb-uhci driver from 2.4.9-ac7 everything works well and the problem never occurs.
-Udo.