Skip to contentSkip to conversation

Plaguing ATAPI Tape drive errors in kernel 2.4.x

DISCUSSION Mark Bratcher 1 participant 1 message Sep 9, 2001

lore
Share & tools
lore
#0 lore raw

Hello,

I have been using a Seagate ST20000A (10GB/20GB) ATAPI tape drive since kernel 2.2.x.

This tape drive worked flawlessly as an IDE tape drive in kernel 2.2.x (up to 2.2.18).

When I upgraded to kernel 2.4.4, it failed as an IDE tape drive. It was recommended to me that I use SCSI emulation to "fix" the problem. I did this and although I got profuse SCSI errors on the console during tape operations, the operations seemed to work anyway (perhaps the errors were non-fatal). I had posted these errors with no replies or suggestions.

Now as I try kernel 2.4.9, nothing works. SCSI emulation no longer works. I get a failure as soon as it attempts to write the tape. I have had to go back to 2.4.4 as a result. I did not attempt to go back and try IDE again on 2.4.9.

I scanned the mailing list archive and found one other person who seems to have the same problem, but no solutions have been posted. Any ideas?

Thanks.

Signature · 3 lines
Mark Bratcher
---------------------------------------------------------
Escape from Microsoft's proprietary tentacles: use Linux!