increasing HZ in Linux kernel
Hello,
I want to increase the frequency of the clock interrupt up to ~10000 to run some experiments.
In the kernel I'm using (2.4.2-2) I've noticed that if you increase HZ above 1536 you get a conflict with .../include/linux/timex.h:75-77
and if you add some lines there, you get a problem with .../include/net/tcp.h:377
when HZ is above 4096.
Is there an easy way to increase clock interrupt freq, or do I have to mess with the whole kernel ?
Thanks in advance.
Antonios
Quoted 13 lines · Antonios G. Danalis
Hello,
I want to increase the frequency of the clock interrupt up to ~10000 to run some experiments.
In the kernel I'm using (2.4.2-2) I've noticed that if you increase HZ above 1536 you get a conflict with .../include/linux/timex.h:75-77
and if you add some lines there, you get a problem with.../include/net/tcp.h:377
when HZ is above 4096.
Quoted 3 lines
Is there an easy way to increase clock interrupt freq, or do I have to mess with the whole kernel ?
The approach we are taking in the high-res-timers project
(http://sourceforge.net/projects/high-res-timers) is to leave HZ alone and schedule timer interrupts as needed between the 1/HZ ticks. I have an kernel with most of the infrastructure ready to put on the sourceforge site (today I hope), that you may want to look at. Be aware, however, it is not really a simple change. You may also want to look at the UTIME patch from the University of Kansas, which, to some extent, is where I started. We both leave HZ alone and schedule timer ticks as needed to get high resolution.
As you have noted, changing HZ impacts other sub systems. There is also an issue of jiffie rollover which affects the longest time you can set timers for. Currently with HZ =100 and 32-bit integers, this is about 248.55 days. If you move HZ to 1000, this moves to 24.855 days, and the 10,000 you want moves it to 2.4855 days which will give problems with at least the cron sub system and probably a lot of others.
George
Quoted 21 lines · george anzinger
Quoted 9 lines · Antonios G. Danalis
Hello,
I want to increase the frequency of the clock interrupt up to ~10000 to run some experiments.
Is there an easy way to increase clock interrupt freq, or do I have to mess with the whole kernel ?
The approach we are taking in the high-res-timers project
(http://sourceforge.net/projects/high-res-timers) is to leave HZ alone and schedule timer interrupts as needed between the 1/HZ ticks. I have an kernel with most of the infrastructure ready to put on the sourceforge site (today I hope), that you may want to look at. Be aware, however, it is not really a simple change. You may also want to look at the UTIME patch from the University of Kansas, which, to some extent, is where I started. We both leave HZ alone and schedule timer ticks as needed to get high resolution.
Quoted 4 lines
As you have noted, changing HZ impacts other sub systems. There is also an issue of jiffie rollover which affects the longest time you can set timers for. Currently with HZ =100 and 32-bit integers, this is about 248.55 days.
Sure ?
I think it is 497 days, jiffies is "unsigned long" on IA32.
(On PPC "HZ" is 1024, but i think there "jiffies" is 64-bit.)
I encountered this problem as my "/proc/uptime"-counter got over the ridge and the machine now has an uptime of 550 days, but /proc/uptime speaks of 550-497=53 days.
I also postet a patch against this effect, but this does only cosmetic and no major changes to other things like "jiffies".
If you move HZ to 1000, this moves to 24.855 days, and the
Quoted 2 lines
10,000 you want moves it to 2.4855 days which will give problems with at least the cron sub system and probably a lot of others.
The rollover at my machine (2.2.10) did not do any harm, but that does not mean that there will be no negative side-effect.
Solong..
Frank.
--
Frank Schneider, <[email protected]>.
Microsoft isn't the answer.
Microsoft is the question, and the answer is NO.
... -.-
Quoted 23 lines · Frank Schneider
Quoted 21 lines · george anzinger
Quoted 9 lines · Antonios G. Danalis
Hello,
I want to increase the frequency of the clock interrupt up to ~10000 to run some experiments.
Is there an easy way to increase clock interrupt freq, or do I have to mess with the whole kernel ?
The approach we are taking in the high-res-timers project
(http://sourceforge.net/projects/high-res-timers) is to leave HZ alone and schedule timer interrupts as needed between the 1/HZ ticks. I have an kernel with most of the infrastructure ready to put on the sourceforge site (today I hope), that you may want to look at. Be aware, however, it is not really a simple change. You may also want to look at the UTIME patch from the University of Kansas, which, to some extent, is where I started. We both leave HZ alone and schedule timer ticks as needed to get high resolution.
Quoted 7 lines
Quoted 4 lines
As you have noted, changing HZ impacts other sub systems. There is also an issue of jiffie rollover which affects the longest time you can set timers for. Currently with HZ =100 and 32-bit integers, this is about 248.55 days.
Sure ?
I think it is 497 days, jiffies is "unsigned long" on IA32.
That is when it rolls over. What I am talking about is when the compare of two unsigned numbers gives the wrong answer. That happens when the difference is greater than 1/2 of the max count. This is independent of the actual values so it really doesn't matter what the counts are, just the differences to be compared. The kernel code is very careful to do the compare in such a way as to avoid the issues around the actual size, but the max difference of 1/2 the value is another matter and can not be avoided with out extra bits.
This is important as the add_timer code checks to see if the time has passed yet. If so it queues the timer for the next tick. This will happen when the timer is to expire more than 1/2 the max unsigned int from now.
George
Quoted 25 lines
(On PPC "HZ" is 1024, but i think there "jiffies" is 64-bit.)
I encountered this problem as my "/proc/uptime"-counter got over the ridge and the machine now has an uptime of 550 days, but
/proc/uptimespeaks of 550-497=53 days.I also postet a patch against this effect, but this does only cosmetic and no major changes to other things like "jiffies".
If you move HZ to 1000, this moves to 24.855 days, and the
Quoted 2 lines
10,000 you want moves it to 2.4855 days which will give problems with at least the cron sub system and probably a lot of others.
The rollover at my machine (2.2.10) did not do any harm, but that does not mean that there will be no negative side-effect.
Solong..
Frank.--
Frank Schneider, <[email protected]>.
Microsoft isn't the answer.
Microsoft is the question, and the answer is NO.
... -.-