Skip to contentSkip to conversation

PROBLEM: [1.] X session randomly crashes because of kernel problem.

DISCUSSION Stephane Brossier 4 participants 7 messages Sep 17, 2001 – Sep 24, 2001

lore
Share & tools
lore
#0 lore raw

[1.] X session randomly crashes because of kernel problem.

[2.] I installed the standart version of Mandrake8.0,
and I am working under kde2.1.1 with Xfree86 4.0.3.

Suddenly my X session exits. Looking at the syslog I can see the following log:

Sep 16 19:13:30 129 kernel: Unable to handle kernel paging request at
virtual address 6d740010
Sep 16 19:13:30 129 kernel:  printing eip:
Sep 16 19:13:30 129 kernel: c012701b
Sep 16 19:13:30 129 kernel: pgd entry c40306d4: 0000000000000000
Sep 16 19:13:30 129 kernel: pmd entry c40306d4: 0000000000000000
Sep 16 19:13:30 129 kernel: ... pmd not present!
Sep 16 19:13:30 129 kernel: Oops: 0000
Sep 16 19:13:30 129 kernel: CPU:    0
Sep 16 19:13:30 129 kernel: EIP:    0010:[kfree+55/192]
Sep 16 19:13:30 129 kernel: EIP:    0010:[<c012701b>]
Sep 16 19:13:30 129 kernel: EFLAGS: 00013087
Sep 16 19:13:30 129 kernel: eax: 064d0000   ebx: c53e7780   ecx:
c1000010   edx: ac740000
Sep 16 19:13:30 129 kernel: esi: c64d0000   edi: 00003286   ebp:
c05615f4   esp: c4051e98
Sep 16 19:13:30 129 kdm[1216]: Server for display :0 terminated
unexpectedly: 2816
Sep 16 19:13:30 129 kernel: ds: 0018   es: 0018   ss: 0018
Sep 16 19:13:31 129 kernel: Process X (pid: 1224, stackpage=c4051000)
Sep 16 19:13:31 129 kernel: Stack: c53e7780 c53e7780 c53e77dc c05615f4
c4051f80
64d00000 c01b03c3 c64d0000
Sep 16 19:13:31 129 kernel:        c53e7780 00000040 c01b03d7 c53e7780
c53e7780
c01b054d c53e7780 000003f0
Sep 16 19:13:31 129 kernel:        c53e7780 c01e8636 c53e7780 c1e37e94
000003f0
00000040 c4051f84 c53e7780
Sep 16 19:13:31 129 kernel: Call Trace: [skb_release_data+103/112]
[kfree_skbmem+11/88] [__kfree_skb+297/304] [unix_stream_recvmsg+714/924]
[sock_recvmsg+65/176] [unix_stream_recvmsg+0/924] [sock_read+147/156]
Sep 16 19:13:31 129 kernel: Call Trace: [<c01b03c3>] [<c01b03d7>]
[<c01b054d>] [<c01e8636>] [<c01ad881>] [<c01e836c>] [<c01ad98f>]
Sep 16 19:13:31 129 kernel:        [sys_read+142/196]
[system_call+51/64]
Sep 16 19:13:31 129 kernel:        [<c012dca6>] [<c0106f23>]
Sep 16 19:13:31 129 kernel:
Sep 16 19:13:31 129 kernel: Code: 8b 1c 11 8b 4c 11 04 2b 71 0c 89 f0 31
d2 f7 73 0c 89 c5 8b
Sep 16 19:13:41 129 kernel:  <3>[drm:r128_do_wait_for_fifo] *ERROR*
r128_do_wait_for_fifo failed!
Sep 16 19:13:42 129 kernel: [drm:r128_do_wait_for_fifo] *ERROR*
r128_do_wait_for_fifo failed!
Sep 16 19:13:57 129 kernel: [drm:r128_do_wait_for_fifo] *ERROR*
r128_do_wait_for_fifo failed!
Sep 16 19:13:59 129 modprobe: modprobe: Can't locate module binfmt-0000
Sep 16 19:13:59 129 modprobe: modprobe: Can't locate module binfmt-0000
Sep 16 19:13:59 129 kernel: [drm:r128_do_wait_for_fifo] *ERROR*

r128_do_wait_for_fifo failed!

[3.] keywords : kernel, Ooups, pmd

[4.] Kernel version (from /proc/version):

Linux version 2.4.3-20mdk ([email protected]) (gcc version egcs-2.91.66
19990314/Linux (egcs-1.1.2 release / Linux-Mandrake 8.0)) #1 Sun Apr 15 23:03:10 CEST 2001

[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)

[6.] A small shell script or example program which triggers the
problem (if possible)

Nothing special to trigger the problem. This happens randomly and quite often-- almost every day.

[7.] Environment
[7.1.] Software (add the output of the ver_linux script here)

Linux 129.150.111.9 2.4.3-20mdk #1 Sun Apr 15 23:03:10 CEST 2001 i686 unknown

Gnu C                  2.96
Gnu make               3.79.1
binutils               2.10.1.0.2
util-linux             2.10s
mount                  2.11b
modutils               2.4.3
e2fsprogs              1.19
reiserfsprogs          3.x.0i
PPP                    2.4.0
Linux C Library        2.2.2
Dynamic linker (ldd)   2.2.2
Procps                 2.0.7
Net-tools              1.59
Console-tools          0.2.3
Sh-utils               2.0
Modules Loaded         soundcore r128 agpgart nfs lockd sunrpc autofs

e100 supermount reiserfs

[7.2.] Processor information (from /proc/cpuinfo):

processor : 0
vendor_id : CyrixInstead
cpu family : 6
model : 2
model name : 6x86MX 2.5x Core/Bus Clock
stepping : 6
cpu MHz : 187.502
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : yes
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu de tsc msr cx8 pge cmov mmx cyrix_arr
bogomips : 374.37

[7.3.] Module information (from /proc/modules):

r128                  144688   1
agpgart                21280   3
nfs                    73632   1 (autoclean)
lockd                  48720   1 (autoclean) [nfs]
sunrpc                 59232   1 (autoclean) [nfs lockd]
autofs                  9232   0 (autoclean) (unused)
e100                   41488   1 (autoclean)
supermount             32496   4 (autoclean)
reiserfs              165760   3

[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)

/proc/ioports
-------------
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0376-0376 : ide1
03c0-03df : vesafb
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
6000-60ff : VIA Technologies, Inc. VT82C586B ACPI 6400-640f : VIA Technologies, Inc. Bus Master IDE
6400-6407 : ide0
6408-640f : ide1
6c00-6c1f : Intel Corporation 82557 [Ethernet Pro 100]
6c00-6c1f : e100
e000-efff : PCI Bus #01
e000-e0ff : ATI Technologies Inc Rage 128 RF

/proc/iomem
-----------

00000000-0009ffff : System RAM 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000f0000-000fffff : System ROM 00100000-07ffffff : System RAM
00100000-001f412b : Kernel code 001f412c-0023bfab : Kernel data
a8000000-afffffff : PCI Bus #01
a8000000-abffffff : ATI Technologies Inc Rage 128 RF

    a8000000-a8ffffff : vesafb

d8000000-dfffffff : PCI Bus #01
d8000000-d8003fff : ATI Technologies Inc Rage 128 RF
e0000000-e3ffffff : VIA Technologies, Inc. VT82C597 [Apollo VP3] e4000000-e40fffff : Intel Corporation 82557 [Ethernet Pro 100] e4100000-e4100fff : Intel Corporation 82557 [Ethernet Pro 100] ffff0000-ffffffff : reserved

[7.5.] PCI information ('lspci -vvv' as root)

00:00.0 Host bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3] (rev
04)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+

        Latency: 16
        Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [a0] AGP version 1.0
                Status: RQ=7 SBA+ 64bit- FW- Rate=x1
                Command: RQ=0 SBA+ AGP+ 64bit- FW- Rate=x1

00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3 AGP] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000e000-0000efff
Memory behind bridge: d8000000-dfffffff
Prefetchable memory behind bridge: a8000000-afffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-

00:07.0 ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA [Apollo VP] (rev 41)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0

00:07.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo] (rev
06) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

        Latency: 64
        Region 4: I/O ports at 6400 [size=16]

00:07.3 Bridge: VIA Technologies, Inc. VT82C586B ACPI (rev 10)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

00:0a.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100]
(rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+

        Latency: 64 (2000ns min, 14000ns max)
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at e4100000 (32-bit, prefetchable) [size=4K]
        Region 1: I/O ports at 6c00 [size=32]
        Region 2: Memory at e4000000 (32-bit, non-prefetchable)

[size=1M]
Expansion ROM at <unassigned> [disabled] [size=1M]

01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 RF (prog-if 00
[VGA])
Subsystem: ATI Technologies Inc: Unknown device 0004
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

        Latency: 64 (2000ns min), cache line size 08
        Interrupt: pin A routed to IRQ 0
        Region 0: Memory at a8000000 (32-bit, prefetchable) [size=64M]
        Region 1: I/O ports at e000 [size=256]
        Region 2: Memory at d8000000 (32-bit, non-prefetchable)

[size=16K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [50] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=7 SBA+ AGP+ 64bit- FW- Rate=x1
Capabilities: [5c] Power Management version 1
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

[7.6.] SCSI information (from /proc/scsi/scsi)

N/A

[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you think to be relevant):

[X.] Other notes, patches, fixes, workarounds:

N/A

#2 lore raw
In reply to Stephane Brossier
Quoted 5 lines

[2.] I installed the standart version of Mandrake8.0,
and I am working under kde2.1.1 with Xfree86 4.0.3.

Suddenly my X session exits. Looking at the syslog I can see the following log:

Can you duplicate the problem with a more recent kernel, and also preferably one without the supermount patch ?

Also does the machine past memtest86 ?

#3 lore raw

Alan,

Thanks you for your time.

Below are my answers.

Quoted 10 lines · Alan Cox
Quoted 6 lines

[2.] I installed the standart version of Mandrake8.0,
and I am working under kde2.1.1 with Xfree86 4.0.3.

Suddenly my X session exits. Looking at the syslog I can see the following log:

Can you duplicate the problem with a more recent kernel, and also preferably one without the supermount patch ?

I did not try that yet since I need this machine-- and this patch to work form home. My plan is to update both my hardware and my kernel but I wanted to report this bug anyway.

Also I can also experience the same problem but with diffrent traces in syslog.

Sep 18 23:50:00 129 CROND[1633]: (root) CMD (   /sbin/rmmod -as)
Sep 19 00:00:00 129 CROND[1889]: (root) CMD (   /sbin/rmmod -as)
Sep 19 00:01:00 129 CROND[1895]: (root) CMD (run-parts /etc/cron.hourly)
Sep 19 00:01:45 129 kdm[1216]: Server for display :0 terminated
unexpectedly: 1536
Sep 19 00:01:56 129 kernel: [drm:r128_do_wait_for_fifo] *ERROR*
r128_do_wait_for_fifo failed!
Sep 19 00:02:13 129 last message repeated 2 times
Sep 19 00:02:15 129 modprobe: modprobe: Can't locate module binfmt-0000
Sep 19 00:02:15 129 modprobe: modprobe: Can't locate module binfmt-0000
Sep 19 00:02:15 129 kernel: [drm:r128_do_wait_for_fifo] *ERROR*

r128_do_wait_for_fifo failed!

I don't know if this is another bug or the same one. The behavior is the same-- my X server crashes suddenly and the kernel seems to be in a bad state because sometimes after that the machine reboots.

Quoted 1 line

Also does the machine past memtest86 ?

I tried that this afternoon and everything seems to be fine on this side.

Steph.

#4 lore raw
Quoted 3 lines
Sep 19 00:02:15 129 modprobe: modprobe: Can't locate module binfmt-0000
Sep 19 00:02:15 129 kernel: [drm:r128_do_wait_for_fifo] *ERROR*

r128_do_wait_for_fifo failed!

Thats an X11 3D error, but the bits before it suggest other problems are triggering it

#5 lore raw
In reply to Stephane Brossier
Quoted 4 lines · Stephane Brossier
Sep 16 19:13:59 129 modprobe: modprobe: Can't locate module binfmt-0000
Sep 16 19:13:59 129 modprobe: modprobe: Can't locate module binfmt-0000
Sep 16 19:13:59 129 kernel: [drm:r128_do_wait_for_fifo] *ERROR*

r128_do_wait_for_fifo failed!

There is a patch which fixes problems such as this. IIRC, it was included in the upstream Linus kernel somewhere in April or later. If you're using XFree86 4.0.3, you'll probably want to upgrade to a later kernel, or patch it with the r128 patch. You can get this patch from:

ftp://people.redhat.com/mharris/patches/linux-r128-drm.patch.bz2

I'd offer to change your mind for you, but I don't have a fresh diaper.
-- Leah to pro-spammer in news.admin.net-abuse.email

#6 lore raw

Re: PROBLEM: [1.] X session randomly crashes because of kernelproblem.

Hi Mike,

Quoted 8 lines · Mike A. Harris
Quoted 4 lines · Stephane Brossier
Sep 16 19:13:59 129 modprobe: modprobe: Can't locate module binfmt-0000
Sep 16 19:13:59 129 modprobe: modprobe: Can't locate module binfmt-0000
Sep 16 19:13:59 129 kernel: [drm:r128_do_wait_for_fifo] *ERROR*

r128_do_wait_for_fifo failed!

Quoted 8 lines

There is a patch which fixes problems such as this. IIRC, it was included in the upstream Linus kernel somewhere in April or later. If you're using XFree86 4.0.3, you'll probably want to upgrade to a later kernel, or patch it with the r128 patch. You can get this patch from:

ftp://people.redhat.com/mharris/patches/linux-r128-drm.patch.bz2

OK. Will try.

Thanks.

Steph.