Skip to contentSkip to conversation

probable hardware bug: clock timer configuration lost

DISCUSSION lonely wolf 3 participants 5 messages Sep 21, 2001

lore
Share & tools
lore
#0 lore raw

Hi there

I've got a small problem. Just installed kernel-2.4.9-ac12 on 5 identical boxes. They all use Asus A7A266 motherboards, with Tbirds running at 1.2 GHz. A lspci gives:

00:00.0 Host bridge: Acer Laboratories Inc. [ALi]: Unknown device 1647 (rev 04)
00:01.0 PCI bridge: Acer Laboratories Inc. [ALi] M5247 00:02.0 USB Controller: Acer Laboratories Inc. [ALi] M5237 USB (rev 03) 00:04.0 IDE interface: Acer Laboratories Inc. [ALi] M5229 IDE (rev c4) 00:06.0 USB Controller: Acer Laboratories Inc. [ALi] M5237 USB (rev 03) 00:07.0 ISA bridge: Acer Laboratories Inc. [ALi] M1533 PCI to ISA Bridge [Aladdin IV]
00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10)
00:0d.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev
10)
00:11.0 Bridge: Acer Laboratories Inc. [ALi] M7101 PMU 01:00.0 VGA compatible controller: nVidia Corporation Vanta [NV6] (rev
15)

The problem: especially when copying from a disk to another one (I have cloned /dev/hda to /dev/hdc, testing both dd if=/dev/hda of=/dev/hdc and cp -a /dev/hdaN /devc/hdcN) a get _a_lot_ of messages like this one:

probable hardware bug: clock timer configuration lost - probably a VIA686a motherboard.
probable hardware bug: restoring chip configuration.

Is it dangerous ? Any way to get rid of this phenomemon (maintaining the hardware...)?

--
Manuel Wolfshant linux registered user #131416
network administrator NoBug Consulting Romania
The degree of technical confidence is inversely proportional to the level of management.

#1 lore raw
Quoted 10 lines

The problem: especially when copying from a disk to another one (I have cloned /dev/hda to /dev/hdc, testing both dd if=/dev/hda of=/dev/hdc and cp -a /dev/hdaN /devc/hdcN) a get _a_lot_ of messages like this one:

probable hardware bug: clock timer configuration lost - probably a VIA686a motherboard.
probable hardware bug: restoring chip configuration.

Is it dangerous ? Any way to get rid of this phenomemon (maintaining the hardware...)?

Its harmless. When we detect this we restore the state of the chip correctly. If anything I should kill the printk but I'd still like to figure the precise errata issue out

#2 lore raw
In reply to lonely wolf
Quoted 3 lines · Alan Cox

Its harmless. When we detect this we restore the state of the chip correctly. If anything I should kill the printk but I'd still like to figure the precise errata issue out

Odd, I just got this during booting of my ALi based boards (never had seen it before). Are we certain the test is correct?

-ben

#3 lore raw
Quoted 2 lines

Odd, I just got this during booting of my ALi based boards (never had seen it before). Are we certain the test is correct?

Not entirely thats why I havent sent that specific change on to Linus. (He has the quiet early fix one which is vital to boot some old VIA boxes
but not that one)

If you have a box with he thing triggering and a moment of time, tweak the code to read "low1, high, low2, high2" and take min(low1,low2), with high1 as the test.

Alan

#4 lore raw
In reply to lonely wolf
Quoted 6 lines · Benjamin LaHaise
Quoted 3 lines

Its harmless. When we detect this we restore the state of the chip correctly. If anything I should kill the printk but I'd still like to figure the precise errata issue out

Odd, I just got this during booting of my ALi based boards (never had seen it before). Are we certain the test is correct?

actually I get the message with RH's 7.1 stock kernel, with 2.4.7 (patched with mosix 1.1.2) and with 2.4.9-ac12. it's always there, waiting for me. I kind of think to remove the printk, just as Alan suggested, because they are _very_ annoying. I have big hard disks, but I wouldn't like to have them filled with logs containing mostly this message :)

--
Manuel Wolfshant linux registered user #131416
network administrator NoBug Consulting Romania
The degree of technical confidence is inversely proportional to the level of management.