Skip to contentSkip to conversation

2.4.10 crashes hard when starting X.

DISCUSSION Carl-Johan Kjellander 1 participant 2 messages Sep 27, 2001 – Sep 28, 2001

lore
Share & tools
lore
#0 lore raw

When I tried 2.4.10 my machine crashed really hard upon starting the Xserver, not even alt-sysrq-SU worked, but alt-sysrq-B did reboot the machine. I've been trying divide and conquer to find out which kernel that crashes my machine from 2.4.8 and 2.4.10.

2.4.8        works fine
2.4.9        works fine
2.4.10-pre8  works fine

... (will try other kernels between pre8 and final tomorrow)
2.4.10 crashes hard

I can here the monitor changing resolition just before the machine halts, but the screen is all black so I can't see any oopsmessages. I've tried with and without FB-console and with and without DRI enabled.

Since alt-sysrq-S doesn't work, there is no usable message in /var/log/messages or output from startx.

The only patch applied is the ext3 patch.

The system is a Pentium II and the graphics card a Voodoo3 3000.

# ./ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.

Linux razor.hemmet.chalmers.se 2.4.10-pre8 #1 Thu Sep 27 02:40:55 CEST 2001 i686 unknown

Gnu C                  2.96
Gnu make               3.79.1
binutils               2.10.91.0.2
util-linux             2.11f
mount                  2.11b
modutils               2.4.2
e2fsprogs              1.23
PPP                    2.4.0
Linux C Library        2.2.2
Dynamic linker (ldd)   2.2.2
Procps                 2.0.7
Net-tools              1.57
Console-tools          0.3.3
Sh-utils               2.0
Modules Loaded         binfmt_misc tuner tvaudio bttv microcode pwcx pwc

usbmouse nfs lockd sunrpc autofs 8139too ipchains vfat fat ntfs es1371 ac97_codec soundcore mousedev hid usb-uhci usbcore

# rpm -q XFree86
XFree86-4.0.3-5
# rpm -q gcc
gcc-2.96-85

Distribution RH 7.1.

Is it an AGPGART issue perhaps. I've tried with and without IOAPIC on UP after reading the mail from Matthias Andree. Should I try XFree 4.1.0?

* Please CC me as I'm not on the list.

/Carl-Johan Kjellander

Signature · 4 lines
begin 644 carljohan_at_kjellander_dot_com.gif
Y1TE&.#=A(0`F`(```````/___RP`````(0`F```"@XR/!\N<#U.;+MI`<[U(>\!UGQ9BGT%>'D2I
Y*=NX,2@OUF2&<827ILW;^822C>\7!!Z1,!K'B5(6H<SH-"E*TJ3%*/>QI6:7"A>Y?):D2^*U@NCV
R<MOQ=]V(B6>LZYD-_T1U<@3W]A4(^$-W4]A#V")W6#.R"$;IR'@).46BN7$9>5D``#L`
#1 lore raw
Quoted 14 lines · Jan Harkes
Quoted 5 lines · Carl-Johan Kjellander

When I tried 2.4.10 my machine crashed really hard upon starting the Xserver, not even alt-sysrq-SU worked, but alt-sysrq-B did reboot the machine. I've been trying divide and conquer to find out which kernel that crashes my machine from 2.4.8 and 2.4.10.

...

Quoted 4 lines

Modules Loaded binfmt_misc tuner tvaudio bttv microcode pwcx pwc
usbmouse nfs lockd sunrpc autofs 8139too ipchains vfat fat ntfs es1371 ac97_codec soundcore mousedev hid usb-uhci usbcore

Quoted 5 lines

Hmm, usbmodules loaded, I reported earlier to l-k that a patch that went into include/linux/list.h was causing USB related oopses.

In list_del the second line (entry->next = entry->prev = 0) is evil. Remove that line and rebuild the kernel & modules and maybe...

2.4.10-pre8 doesn't have that line and today I got lockup with -pre8 as well. This happened when the daily cronjobs were running.

So far:

2.4.8        works fine
2.4.9        works fine
2.4.10-pre8  crashes when updatedb or tripwire runs.
2.4.10       crashes hard upon X startup.

/Carl-Johan Kjellander

Signature · 4 lines
begin 644 carljohan_at_kjellander_dot_com.gif
Y1TE&.#=A(0`F`(```````/___RP`````(0`F```"@XR/!\N<#U.;+MI`<[U(>\!UGQ9BGT%>'D2I
Y*=NX,2@OUF2&<827ILW;^822C>\7!!Z1,!K'B5(6H<SH-"E*TJ3%*/>QI6:7"A>Y?):D2^*U@NCV
R<MOQ=]V(B6>LZYD-_T1U<@3W]A4(^$-W4]A#V")W6#.R"$;IR'@).46BN7$9>5D``#L`