Skip to contentSkip to conversation

building tools from montavista SRPMs

DISCUSSION Mark Pilon 2 participants 2 messages Oct 2, 2001

lore
Share & tools
lore

Mark Pilon

author
#0 lore raw

I'm sure this has been covered somewhere, but I've yet to find it this morning ... all constructive replies appreciated.

I'm working from mvista professional v.2.0 and want to build some of the tools from scratch -- specifically for a ppc405.

I've seen references to 'rpmconfig' but don't know just what to feed rpm / rpmconfig in order to build per the SRPM spec files.

can someone point me to the details of how to do this ... ?

many thanks,

Mark

--
Mark Pilon

Minolta-QMS
P.O. Box 37
Fallon, MT. 59326-0037

1-406-853-0433

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

#1 lore raw
Quoted 2 lines · Mark Pilon

I've seen references to 'rpmconfig' but don't know just what to feed rpm / rpmconfig in order to build per the SRPM spec files.

You need to install the hhl-host-rpmconfig RPM (something like hhl-host-rpmconfig-1.98-hhl2.0.1.i386.rpm) Then follow the instructions in /opt/hardhat/config/rpm/README.

--
Jeff Kowing
[email protected]

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/