Skip to contentSkip to conversation

Size of file /proc/mtrr

PATCH Lorinczy Zsigmond 1 participant 1 message Oct 3, 2001

lore
Share & tools
lore
#0 lore raw

Hy Folks!

I found a little problem about file /proc/mtrr: it shorter than it is...

zsiga-pc:/usr/src/linux# ls -l /proc/mtrr
-rw-r--r--    1 root     root          132 Oct  3 10:03 /proc/mtrr
                                       ^^^ 
zsiga-pc:/usr/src/linux# cat /proc/mtrr | wc -c
    203
    ^^^
zsiga-pc:/usr/src/linux# cat /proc/mtrr
reg00: base=0x00000000 (   0MB), size= 128MB: write-back, count=1
reg01: base=0x08000000 ( 128MB), size=  32MB: write-back, count=1
reg02: base=0xf5000000 (3920MB), size=   4MB: write-combining, count=1
zsiga-pc:/usr/src/linux# mc -v /proc/mtrr
File: /proc/mtrr  132 bytes  100%
reg00: base=0x00000000 (   0MB), size= 128MB: write-back, count=1
reg01: base=0x08000000 ( 128MB), size=  32MB: write-back, count=1

I looked into arch/i386/kernel/mtrr.c, I found variable ascii_buf_bytes, wich contains the real length (203 in this case), and is copied into 'proc_root_mtrr->size' (line 1863) when changes.

The problem is that the procfs do not follow the changing of this value (caching problem ?), so stat(2) reports the old length (132).

Here is a quick workaround: set proc_root_mtrr->size to zero

mtrr.c Wed Oct 3 10:07:45 2001 renamed from mtrr.bak Fri Sep 21 19:55:22 2001 +1 -1
@@ -1860,7 +1860,7 @@
     devfs_set_file_size (devfs_handle, ascii_buf_bytes);
 #  ifdef CONFIG_PROC_FS
     if (proc_root_mtrr)
-       proc_root_mtrr->size = ascii_buf_bytes;
+       proc_root_mtrr->size = 0;
 #  endif  /*  CONFIG_PROC_FS  */
 }   /*  End Function compute_ascii  */