Skip to contentSkip to conversation

SMP processor rework help needed

DISCUSSION Manfred Spraul 2 participants 2 messages Oct 15, 2001

lore
Share & tools
lore
#0 lore raw

Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Quoted 4 lines

For intel the initial determination is made having the cpus race on the apic bus. The cpu that sends a message first gets the lowest apicid. Though I need to see how the P4 Xeon does it, as the apic bus is actually unused.

Huh?

24547202.pdf: (i.e. volume 3 of the ia32 SDM)
<<<<<<<<
The APIC ID register is loaded at power up by sampling configuration data that is driven onto pins of the processor. For the Pentium 4 and P6 family processors, pins A11# and A12# and pins BR0# through BR3# are sampled; for the Pentium processor, pins BE0# through BE3# are sampled. <<<<<<

--
Manfred

#1 lore raw
Quoted 9 lines

Huh?

24547202.pdf: (i.e. volume 3 of the ia32 SDM)
<<<<<<<<
The APIC ID register is loaded at power up by sampling configuration data that is driven onto pins of the processor. For the Pentium 4 and P6 family processors, pins A11# and A12# and pins BR0# through BR3# are sampled; for the Pentium processor, pins BE0# through BE3# are sampled. <<<<<<

Dual Pentium at least has a mode where the boot processor is decided by a boot time resolution - its valuable for HA uses. I'm not sure if it affects the APIC ident