Skip to contentSkip to conversation

invert lcd on mpc823l

DISCUSSION Stefan Wanner 3 participants 4 messages Oct 22, 2001

lore
Share & tools
lore
#0 lore raw

hi all

i'm using a sharp LQ64D341 tft lcd on a MPC823L board with the kernelsources from denx.de. now when i use /dev/tty0 (the frambuffer character device) the output apears inverse (white background, black text). the tux in the upper left corner has also strange colors (looks also like inverse). how can i fix that?

thanks for helping

stefan

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

#1 lore raw
Quoted 2 lines · In message <[email protected]> you wrote:

i'm using a sharp LQ64D341 tft lcd on a MPC823L board with the

Is this a custom board, or some standard product?

Quoted 4 lines

kernelsources from denx.de. now when i use /dev/tty0 (the frambuffer character device) the output apears inverse (white background, black text). the tux in the upper left corner has also strange colors (looks also like inverse). how can i fix that?

Are you sure that all wires are connected properly?

Works here - on a TQM823L-E.

Wolfgang Denk

--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: [email protected] What can it profit a man to gain the whole world and to come to his property with a gastric ulcer, a blown prostate, and bifocals?
-- John Steinbeck, _Cannery Row_

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

#2 lore raw

i'm using a tq components board (bought it from you) the pins are connected this way:

Pinbelegung zum Anschluss des SHARP LQ64D341 an TQM823L Board
-------------------------------------------------------------

TQM823L -------------> SHARP LQ64D341 TFT

Stecker Pin Signal Pin Signal

X11 1

X11     20 ---- SHIFT/CLK   ----->  2       CK
X11     14 ---- FRAME/HSYNC ----->  3       Hsync
X11     16 ---- FRAME/VSYNC ----->  4       Vsync
X11                                 5
X11                                 6       R0    RED (LSB)
X11                                 7       R1    RED
X11     5  ---- LCD_A       ----->  8       R2    RED
X11     26 ---- LD2         ----->  9       R3    RED
X11     25 ---- LD1         ----->  10      R4    RED
X11     24 ---- LD0         ----->  11      R5    RED
X11                                 12      GND
X11                                 13      G0    GREEN (LSB)
X11                                 14      G1    GREEN
X11     3  ---- LCD_B       ----->  15      G2    GREEN
X11     29 ---- LD5         ----->  16      G3    GREEN
X11     28 ---- LD4         ----->  17      G4    GREEN
X11     27 ---- LD3         ----->  18      G5    GREEN
X11                                 19      GND
X11                                 20      B0    BLUE (LSB)
X11                                 21      B1    BLUE
X11     1  ---- LCD_C       ----->  22      B2    BLUE
X11     32 ---- LD8         ----->  23      B3    BLUE
X11     31 ---- LD7         ----->  24      B4    BLUE
X11     30 ---- LD6         ----->  25      B5    BLUE
X11     19 ---- GND         ------  26      GND
X11                                 27      ENAB  Siehe Manual 7-2
(nicht auf High!)
X11     7  ---- VCC5V       ------  28      VCC
X11                                 29
X11                                 30      R/L   Anzeigemodi  Siehe

Manual Seite LCY-99193-4
X11 31 U/D Anzeigemodi Siehe
Manual Seite LCY-99193-4

Quoted 14 lines · Wolfgang Denk
Quoted 2 lines · In message <[email protected]> you wrote:

i'm using a sharp LQ64D341 tft lcd on a MPC823L board with the

Is this a custom board, or some standard product?

Quoted 5 lines

kernelsources from denx.de. now when i use /dev/tty0 (the frambuffer character device) the output apears inverse (white background, black text). the tux in the upper left corner has also strange colors (looks also like inverse). how can i fix that?

Quoted 7 lines

Are you sure that all wires are connected properly?

Works here - on a TQM823L-E.

Wolfgang Denk

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

#3 lore raw
In reply to Stefan Wanner
Quoted 6 lines · Stefan Wanner

i'm using a sharp LQ64D341 tft lcd on a MPC823L board with the kernelsources from denx.de. now when i use /dev/tty0 (the frambuffer character device) the output apears inverse (white background, black text). the tux in the upper left corner has also strange colors (looks also like inverse). how can i fix that?

Try inverting your colormap. Try something like the following:

ppc/8xx_io/lcd823.c Mon Oct 22 09:30:46 2001 renamed from ppc/8xx_io/lcd823.c.orig Mon Oct 22 09:30:43 2001 +1 -0
@@ -638,6 +638,7 @@
     }
 
     lcd823_init_dev();
+    fb_invert_cmaps();
     lcd823_install_cmap(0, &fb_info);
 
     if (register_framebuffer(&fb_info) == 0) {

Regards,

--
Paul Mundt <[email protected]>
MontaVista Software, Inc.

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/