Skip to contentSkip to conversation

lvm und promise fasttrack

linux-lvm Jens Tkotz 3 participants 3 messages Oct 25, 2001 – Oct 26, 2001

lore
Share & tools
lore

Jens Tkotz

author
#0 lore raw

Hallo Heinz,

ich hab schon wieder ein "Problem".

Auf meinem Mainboard ist ein Promise Fasttrack 100 Controller. Die Festplatten kann ich �ber /dev/hd[e-h] ansprechen.

Es gibt aber auch die M�glichkeit das Hardware Raid anzuspechen �ber /dev/ataraid/d[0-2]px , mit x als Partitionsnummer.

Beim Aufruf von vgcreate passiert folgendes :
vgcreate gl_lvm /dev/ataraid/d0p1
vgcreate -- physical volume name "/dev/ataraid/d0p1" is invalid

Gr��e,

Jens

#1 lore raw

Hallo Jens,

Quoted 1 line
Quoted 1 line

ich hab schon wieder ein "Problem".

Well, it might be a good idea to write your requests to an international mailing list in english ...
so let's translate your questions (not a strict translation)

Quoted 7 lines
Quoted 2 lines

Auf meinem Mainboard ist ein Promise Fasttrack 100 Controller. Die Festplatten kann ich ueber /dev/hd[e-h] ansprechen.

My mainboard features a Promise Fasttrack 100 Controller, and I can access my harddrives as /dev/hd[e-h]

Quoted 2 lines

Es gibt aber auch die Moeglichkeit das Hardware Raid anzuspechen ueber /dev/ataraid/d[0-2]px , mit x als Partitionsnummer.

Quoted 7 lines

But there is also the option to use the hardware raid as /dev/ataraid/d[0-2]px, with x beeing the partition number

Quoted 1 line

Beim Aufruf von vgcreate passiert folgendes :

when calling vgcreate like this:
vgcreate gl_lvm /dev/ataraid/d0p1
vgcreate -- physical volume name "/dev/ataraid/d0p1" is invalid

For this to work, you must first use pvcreate to add the LVM's PV information to your device:
pvcreate /dev/ataraid/d0p1

But this will not help you, as pvcreate checls the device name against a list of valid devices, and /dev/ataraid is not port of this (at last not in the way outdated 0.9.1beta5 src I've on this system)

OOTH you should not trust the bios based softraid of any of the consumer raid devices, it is no hardware raid (not just MHO). If you want to do raid with IDE devices, I'd suggest using the kernel based MD drivers, and putting every IDE disk on it's own channel.

Signature · 2 lines
Goetz Bock                                              IT Consultant
Dipl.-Inf. Univ.
#2 lore raw
Quoted 5 lines · Goetz Bock

Hallo Jens,

Quoted 1 line
Quoted 1 line

ich hab schon wieder ein "Problem".

Well, it might be a good idea to write your requests to an international mailing list in english ...

Well, Jens probably wanted to send it to me personally :-)

Quoted 20 lines

so let's translate your questions (not a strict translation)

Quoted 7 lines
Quoted 2 lines

Auf meinem Mainboard ist ein Promise Fasttrack 100 Controller. Die Festplatten kann ich ueber /dev/hd[e-h] ansprechen.

My mainboard features a Promise Fasttrack 100 Controller, and I can access my harddrives as /dev/hd[e-h]

Quoted 2 lines

Es gibt aber auch die Moeglichkeit das Hardware Raid anzuspechen ueber /dev/ataraid/d[0-2]px , mit x als Partitionsnummer.

Quoted 7 lines

But there is also the option to use the hardware raid as /dev/ataraid/d[0-2]px, with x beeing the partition number

Quoted 1 line

Beim Aufruf von vgcreate passiert folgendes :

when calling vgcreate like this:
vgcreate gl_lvm /dev/ataraid/d0p1
vgcreate -- physical volume name "/dev/ataraid/d0p1" is invalid

For this to work, you must first use pvcreate to add the LVM's PV information to your device:
pvcreate /dev/ataraid/d0p1

Quoted 8 lines

But this will not help you, as pvcreate checls the device name against a list of valid devices, and /dev/ataraid is not port of this (at last not in the way outdated 0.9.1beta5 src I've on this system)

OOTH you should not trust the bios based softraid of any of the consumer raid devices, it is no hardware raid (not just MHO). If you want to do raid with IDE devices, I'd suggest using the kernel based MD drivers, and putting every IDE disk on it's own channel.

Yes, but if Jens still wants it, "atatraid" needs to be added to the _devdir array in lvm_dir_cache.c.
In future LVM you just change/add an entry to a central config file.

Quoted 4 lines
Signature · 3 lines
-- 
Goetz Bock                                              IT Consultant
Dipl.-Inf. Univ.
Signature · 15 lines
Regards,
Heinz    -- The LVM Guy --

*** Software bugs are stupid.
    Nevertheless it needs not so stupid people to solve them ***

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

Heinz Mauelshagen                                 Sistina Software Inc.
Senior Consultant/Developer                       Am Sonnenhang 11
                                                  56242 Marienrachdorf
                                                  Germany
[email protected]                           +49 2626 141200
                                                       FAX 924446
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-