Skip to contentSkip to conversation

mounting NTFS

DISCUSSION rohit prasad 3 participants 3 messages Nov 27, 2001

lore
Share & tools
lore
#0 lore raw

Hi,

I have a kernel version of 2.4.7 .

When I try ,

mount -t ntfs /dev/hda1 /mnt/msdos

I get a message ntfs not supported, where as the manual on mount indicates that ntfs is supported / mountable.

Am I missing something.

Thanks I A,
Rohit
___________________________________________________________________________
Visit http://www.visto.com.
Find out how companies are linking mobile users to the enterprise with Visto.

#1 lore raw
Quoted 1 line · rohit prasad

mount -t ntfs /dev/hda1 /mnt/msdos

seems fishy to mount an ntfs filesystem in
/mnt/msdos
:-)

Quoted 1 line

I get a message ntfs not supported, where as the manual on mount indicates that ntfs is supported / mountable.

NTFS needs to be supported by kernel to work. do : "cat /proc/filesystems"
it should look like this, at least for the NTFS line :
~$ cat /proc/filesystems
nodev rootfs
nodev bdev
nodev proc
nodev sockfs
nodev tmpfs
nodev shm
nodev pipefs
nodev binfmt_misc

	ext2
	minix
	msdos
	vfat
	iso9660

nodev smbfs
ntfs
nodev autofs
reiserfs
nodev devpts
xfs
nodev usbdevfs

If it doesn't, either you have to load the NTFS module :
"modprobe ntfs" should do the trick, or compile it directly into your kernel, if you know how to do.

BTW write support for NTFS is dangerous, only works (barely) for NT4 volumes, not W2K. You can read from NTFS safely though.

Regards,

François Cami

#2 lore raw
In reply to rohit prasad

Hi Rohit,

Quoted 1 line

I have a kernel version of 2.4.7

Ah. Is that RedHat's 2.4.7?

Quoted 6 lines

When I try ,

mount -t ntfs /dev/hda1 /mnt/msdos

I get a message ntfs not supported, where as the manual on mount indicates that ntfs is supported / mountable.

As Francois says, check /proc/filesystems. If you don't find ntfs there, you'll have to build a new kernel (not as scary as it sounds).

http://www.linuxdoc.org/HOWTO/Kernel-HOWTO.html

covers ALL the details. If you have a RedHat system, then install the kernel source and you'll find a .config that matches your system. You just need to select NTFS support.

If you have any more questions or problems please go to our NTFS help forum:

http://sourceforge.net/forum/forum.php?forum_id=44085

Cheers,
FlatCap (Rich)
[email protected]