crash in smp_core99_kick_cpu
This is a dual CPU G4. Startup freezes after
smp_core99_kick_cpu done
is displayed. Commenting out the
KL_GPIO_OUT(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE);
line in feature_core99_kick_cpu allows the boot process to continue but with only CPU #0 and a "Processor 1 is stuck" message.
MacOS 9.2 booted fine and detected both CPUs.
Compiler gcc 2.96
Kernel 2.4.13
Kernels compiled with gcc 3.0.2 just crash and go into open firmware.
cat /proc/cpuinfo displays
processor : 0
cpu : 7450, altivec supported
temperature : 1-76 C (uncalibrated)
clock : 799MHz
revision : 2.1 (pvr 8000 0201)
bogomips : 797.90
total bogomips : 797.90
zero pages : total: 0 (0Kb) current: 0 (0Kb) hits: 0/0 (0%)
machine : PowerMac3,5
motherboard : PowerMac3,5 MacRISC2 MacRISC Power Macintosh
L2 cache : 256K unified
memory : 256MB
pmac-generation : NewWorld
Quoted 1 line · Adam Williams
This is a dual CPU G4. Startup freezes after
[snip]
Quoted 2 lines
Compiler gcc 2.96
Kernel 2.4.13
Hit http://penguinppc.org/dev/kernel.shtml, and try one of those trees. There's a few minor differences in the linuxppc_2_4 tree which might fix this and will be in Linus' tree eventually. And for future reference, you might have better luck on linuxppc-dev or linuxppc-users
(http://lists.linuxppc.org)
Quoted 2 lines
Kernels compiled with gcc 3.0.2 just crash and go into open firmware.
Known gcc 3.0.x/kernel 'feature'.
Signature · 2 lines
Tom Rini (TR1265) http://gate.crashing.org/~trini/
Quoted 14 lines
This is a dual CPU G4. Startup freezes after
smp_core99_kick_cpudoneis displayed. Commenting out the
KL_GPIO_OUT(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE);line in
feature_core99_kick_cpuallows the boot process to continue but with only CPU #0 and a "Processor 1 is stuck" message.MacOS 9.2 booted fine and detected both CPUs.
Quoted 7 lines
Compiler gcc 2.96
Kernel 2.4.13Kernels compiled with gcc 3.0.2 just crash and go into open firmware.
cat
/proc/cpuinfodisplays
Which kernel ? Linus 2.4.13 or one of the PPC bk trees ?
I've been using 2.4.13 from bk _devel on a dual G4 for some time now, it just worked. I'm away from my dev. machines for a few days, but I'll look into this problem as soon as I'm back.
gcc 3.0.2 isn't ready for ppc kernel compiles afaik. I'm personally still using 2.95.4 from debian "sid".
Ben.