Skip to contentSkip to conversation

Question about sniffers and linux

DISCUSSION salinarl 2 participants 3 messages Dec 7, 2001 – Dec 10, 2001

lore
Share & tools
lore

salinarl

author
#0 lore raw

Hello to everyone,
I am new to kernel internals, and I would like to know how can a sniffer read whole packets, I mean including the link layer header. In the receive path, this happens, I think, in the net_rx_action(), but in the transmit path?
I know that there is a function called dev_queue_xmit_nit() for this, but how can a driver add a link layer header to a packet before this function gets called? The hard_start_xmit() of the driver is, in fact, called after the dev_queue_xmit_nit(), (in the function dev_queue_xmit() ).
I think I'm missing something important about the subject, but I hope someone will answer me, anyway.
Thank you in advance,

Lanfranco

#1 lore raw

Hi salinarl!

You don't need to write a kernel module to do this.

Use RAW sockets. (See man 2 socket). If you're not interested in the link layer, you can also use DGRAM sockets to get everything from layer 3 and up (ip, arp, etc.)

Quoted 19 lines

I am new to kernel internals, and I would like to know how can a sniffer read whole packets, I mean including the link layer header. In the receive path, this happens, I think, in the net_rx_action(), but in the transmit path?
I know that there is a function called dev_queue_xmit_nit() for this, but how can a driver add a link layer header to a packet before this function gets called? The hard_start_xmit() of the driver is, in fact, called after the dev_queue_xmit_nit(), (in the function dev_queue_xmit() ).
I think I'm missing something important about the subject, but I hope someone will answer me, anyway.
Thank you in advance,

Lanfranco

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Signature · 16 lines
Regards
 Abraham

What we wish, that we readily believe.
		-- Demosthenes

__________________________________________________________
 Abraham vd Merwe - 2d3D, Inc.

 Device Driver Development, Outsourcing, Embedded Systems

  Cell: +27 82 565 4451         Snailmail:
   Tel: +27 21 761 7549            Block C, Antree Park
   Fax: +27 21 761 7648            Doncaster Road
 Email: [email protected]         Kenilworth, 7700
  Http: http://www.2d3d.com        South Africa
#2 lore raw
In reply to salinarl

----- Original Message -----
From: Abraham vd Merwe <[email protected]>
To: salinarl <[email protected]>
Cc: Linux Kernel Development <[email protected]>
Sent: Monday, December 10, 2001 9:09 AM
Subject: Re: Question about sniffers and linux

Quoted 8 lines

Hi salinarl!

You don't need to write a kernel module to do this.

Use RAW sockets. (See man 2 socket). If you're not interested in the link layer, you can also use DGRAM sockets to get everything from layer 3 and up (ip, arp, etc.)

Thank you for your answer, Abraham!
Perhaps I did not explain myself very well: I know about RAW sockets, but the problem is that, for example, PPP headers are not passed to packet sockets (for outgoing packets), because they are added inside the PPP driver after the call to dev_queue_xmit_nit().
I don't know if this problem is typical of PPP, but it seems quite general, to me. I think Ethernet headers are a special case, because they are taken from a
cache and added in the IP layer, so they are visible to packet sockets. Can someone please tell me if I'm wrong?
Best regards,

Lanfranco