Skip to contentSkip to conversation

iphase ATM driver (Oops - Div0)

BUG/PATCH Till Immanuel Patzschke 1 participant 1 message Nov 13, 2001 ATM

lore
Share & tools
lore
#0 lore raw

Hi,

please find attached a fix for a nasty bug in the iphase ATM NIC. If te max_sdu exceeds the limit the internal structure ia_vcc is freed BUT the pointer in the vcc struct is NOT been reset. This results in a Div0 error in ia_close (ctimeout = 300000 / ia_vcc->pcr) - clearing the referencing pointer fixes the problem.
I've also diabled the "Misaligned SKB" check since it works fine w/o it AND re-aligning is to expensive if it works (I know, jumping to conclusions, but it works fine on my boxes)...
Could you please - at least - apply the pointer fix?

Thanks,

Immanuel

--

Till Immanuel Patzschke                 mailto: [email protected]
interNetwork AG                         Phone:  +49-(0)611-1731-121
Bierstadter Str. 7                      Fax:    +49-(0)611-1731-31
D-65189 Wiesbaden                       Web:    http://www.internetwork-ag.de
drivers/atm/iphase.c +6 -3
diff -Naur linux-2.4.10/drivers/atm/iphase.c linux-2.4.10-new/drivers/atm/iphase.c
@@ -1777,8 +1777,9 @@
         memset((caddr_t)ia_vcc, 0, sizeof(*ia_vcc));
         if (vcc->qos.txtp.max_sdu > 
                          (iadev->tx_buf_sz - sizeof(struct cpcs_trailer))){
-           printk("IA:  SDU size over the configured SDU size %d\n",
-                                                          iadev->tx_buf_sz);
+           printk("IA:  SDU size over (%d) the configured SDU size %d\n",
+		  vcc->qos.txtp.max_sdu,iadev->tx_buf_sz);
+	   INPH_IA_VCC(vcc) = NULL;  
            kfree(ia_vcc);
            return -EINVAL; 
         }
@@ -2896,14 +2897,16 @@
                  dev_kfree_skb_any(skb);
           return 0;
         }
+#if 0
         if ((u32)skb->data & 3) {
-           printk("Misaligned SKB\n");
+           printk("Misaligned SKB (0x%p)\n",skb->data);
            if (vcc->pop)
                  vcc->pop(vcc, skb);
            else
                  dev_kfree_skb_any(skb);
            return 0;
         }       
+#endif
 	/* Get a descriptor number from our free descriptor queue  
 	   We get the descr number from the TCQ now, since I am using  
 	   the TCQ as a free buffer queue. Initially TCQ will be