Skip to contentSkip to conversation

badblocks fails with promise 100TX2

DISCUSSION nakai 1 participant 1 message Nov 14, 2001

lore
Share & tools
lore

nakai

author
#0 lore raw

When I run badblocks, it failed, sometime it hanged OS.

Condition:
runs 2 badblocks command at same time, check different drives. EX) badblocks /dev/hdh4; badblocks /dev/hde4 /dev/hdh and /dev/hde is connected to promise fasttrak 66 (with pdc20267 chip). I also tested with fasttrak 100TX2 (with pdc20268), and got same results. Duron(800)/VT133/VIA686b
RedHat7.1(with 2.4.10 kernel)
Results:
They report many blocks(are broken). If I kill one badblocks command, another badblocks command stops reporting blocks. I think there is conflict when read out.
On 2.4.2, there is no problem (but can not use fasttrak 100).

I know, there is some changes on ide-pci.c between 2.4.2 and 2.4.10, and many changes on pdc202xx.c. Something go wrong?
I just want to build software RAID. But by this problem, I can not build Software RAID with new promise 100TX2 card.

Signature · 5 lines
-=-=-=-=  SHINKO ELECTRIC INDUSTRIES CO., LTD.           =-=-=-=-
=-=-=-=-    Core Technology Research & Laboratory,       -=-=-=-=
-=-=-=-=      Infomation Technology Research Dept.       =-=-=-=-
=-=-=-=-  Name:Hisakazu Nakai          TEL:026-283-2866  -=-=-=-=
-=-=-=-=  Mail:[email protected]  FAX:026-283-2820  =-=-=-=-