Skip to contentSkip to conversation

Possible Bug: 2.4.14 USB Keyboard

DISCUSSION Martin McWhorter 4 participants 12 messages Nov 14, 2001 – Nov 15, 2001

lore
Share & tools
lore
#0 lore raw

Hello,

I wanted to try the new preemptive kernel patch so I downloaded the 2.4.14 sources from kernel.org and the preemptive patch for 2.4.14, configured the kernel, built it, mkinitrded and liloed.

Everything came up fine, though my usb keyboard does not respond. The currios thing is that when the kernel is boooting and sysinit starts the USB devices they all report that they start ok:

Nov 14 09:42:01 m_mcwhorter rc.sysinit: Mounting USB filesystem:  succeeded
Nov 14 09:42:01 m_mcwhorter rc.sysinit: Initializing USB controller (usb-uhci):  succeeded
Nov 14 09:42:01 m_mcwhorter rc.sysinit: Initializing USB HID interface: 
 succeeded
Nov 14 09:42:01 m_mcwhorter rc.sysinit: Initializing USB keyboard: succeeded
Nov 14 09:42:01 m_mcwhorter rc.sysinit: Initializing USB mouse:  succeeded

But the USB keyboard does not repond, though the mouse connected through the keyboard hub works.

Is this a possible bug?

Linux 2.4.14 with preemptive patch
Redhat 7.1
HP Pavillion 9690C with supplied USB keyboard USB mouse Intel Pentium III 800

Thanks,
Martin

#1 lore raw
Quoted 5 lines · Martin McWhorter

But the USB keyboard does not repond, though the mouse connected through the keyboard hub works.

Is this a possible bug?

Do you have the same problem without the preemptive patch?

If so, can you send the results of /proc/bus/usb/devices and /proc/bus/usb/drivers?

thanks,

greg k-h

#3 lore raw
In reply to Martin McWhorter

Greg

Do you have the same problem without the preemptive patch?

Yes. I appoligize for not being clear. I get the same results with plain 2.4.14 w/out the preemptive patch.

If so, can you send the results of /proc/bus/usb/devices andT: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2

B:  Alloc=159/900 us (18%), #Int=  4, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI Root Hub
S:  SerialNumber=d400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 3
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=03f0 ProdID=010c Rev= 0.01
S:  Manufacturer=HP
S:  Product=Multimedia Keyboard Hub
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=255ms
T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=03f0 ProdID=020c Rev= 0.01
S:  Manufacturer=HP
S:  Product=Multimedia Keyboard Hub
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=01 Driver=hid
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl= 10ms
I:  If#= 1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=hid
E:  Ad=82(I) Atr=03(Int.) MxPS=   4 Ivl=255ms
T:  Bus=01 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#=  4 Spd=1.5 MxCh= 0
D:  Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=046d ProdID=c001 Rev=11.01
S:  Manufacturer=Logitech
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 26mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=hid
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl= 10ms
Quoted 1 line

/proc/bus/usb/drivers?

usbdevfs
hub
hid
keyboard

Thanks,
Martin

#4 lore raw
In reply to Martin McWhorter
Quoted 3 lines · Martin McWhorter

Yes. I appoligize for not being clear. I get the same results with plain 2.4.14 w/out the preemptive patch.

Thanks for the files. It looks like the USB drivers are being bound to your devices properly.

What does the kernel log say when you plug in your keyboard?

thanks,

greg k-h

#5 lore raw
In reply to Martin McWhorter

Greg,

Sorry I had a think-o. I sent you the info on the wrong kernel.

/proc/bus/usb/devices for 2.4.14 VANILLA

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=146/900 us (16%), #Int=  3, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI Root Hub
S:  SerialNumber=d400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 3
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=03f0 ProdID=010c Rev= 0.01
S:  Manufacturer=HP
S:  Product=Multimedia Keyboard Hub
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=255ms
T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=03f0 ProdID=020c Rev= 0.01
S:  Manufacturer=HP
S:  Product=Multimedia Keyboard Hub
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=01 Driver=hid
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl= 10ms
I:  If#= 1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=hid
E:  Ad=82(I) Atr=03(Int.) MxPS=   4 Ivl=255ms
T:  Bus=01 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#=  4 Spd=1.5 MxCh= 0
D:  Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=046d ProdID=c001 Rev=11.01
S:  Manufacturer=Logitech
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 26mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=hid
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl= 10ms

/proc/bus/usb/drivers
usbdevfs
hub
hid
keyboard

Quoted 3 lines

What does the kernel log say when you plug in your keyboard?

Nov 15 12:38:10 m_mcwhorter kernel: usb.c: USB disconnect on device 2
Nov 15 12:38:10 m_mcwhorter kernel: usb.c: USB disconnect on device 3
Nov 15 12:38:10 m_mcwhorter kernel: usb-uhci.c: interrupt, status 3, frame# 1572
Nov 15 12:38:10 m_mcwhorter kernel: usb.c: USB disconnect on device 4
Nov 15 12:38:12 m_mcwhorter kernel: hub.c: USB new device connect on bus1/1, assigned device number 5
Nov 15 12:38:12 m_mcwhorter kernel: hub.c: USB hub found
Nov 15 12:38:12 m_mcwhorter kernel: hub.c: 3 ports detected
Nov 15 12:38:13 m_mcwhorter kernel: hub.c: USB new device connect on bus1/1/1, assigned device number 6
Nov 15 12:38:13 m_mcwhorter kernel: input0: USB HID v1.00 Keyboard [HP Multimedia Keyboard Hub] on usb1:6.0
Nov 15 12:38:13 m_mcwhorter kernel: : USB HID v1.00 Device [HP Multimedia Keyboard Hub] on usb1:6.1
Nov 15 12:38:13 m_mcwhorter /etc/hotplug/usb.agent: ... no drivers for USB product 3f0/10c/1
Nov 15 12:38:13 m_mcwhorter kernel: hub.c: USB new device connect on bus1/1/3, assigned device number 7
Nov 15 12:38:13 m_mcwhorter kernel: input1: USB HID v1.00 Mouse [Logitech] on usb1:7.0

Thanks again,
Martin

#6 lore raw
In reply to Martin McWhorter

Pete,

Quoted 1 line

ok, so no usbkbd, it seems. But still, do lsmod too, please.

[root@m_mcwhorter m_mcwhorter]# /sbin/lsmod
Module Size Used by

emu10k1                49584   0  (autoclean)
sr_mod                 13968   0  (autoclean)
ac97_codec              9248   0  (autoclean) [emu10k1]
soundcore               3376   4  (autoclean) [emu10k1]
usbkbd                  2944   0  (unused)
autofs                  9184   1  (autoclean)
8139too                13152   1  (autoclean)
ipchains               31232   0
ide-scsi                7712   0
scsi_mod               86256   2  [sr_mod ide-scsi]
ide-cd                 26624   0
cdrom                  27328   0  [sr_mod ide-cd]
mousedev                3936   1
keybdev                 1728   0  (unused)
hid                    12576   0  (unused)
input                   3136   0  [usbkbd mousedev keybdev hid]
usb-uhci               21344   0  (unused)
usbcore                49184   1  [usbkbd hid usb-uhci]

Thanks for the help,
Martin

#7 lore raw
In reply to Martin McWhorter
Quoted 3 lines · Martin McWhorter

Greg,

Sorry I had a think-o. I sent you the info on the wrong kernel.

Do you have the keybdev module loaded? Also, don't load the usbkbd module, if you load hid ...

Signature · 2 lines
Vojtech Pavlik
SuSE Labs
#8 lore raw
In reply to Martin McWhorter
Quoted 8 lines

Date: Thu, 15 Nov 2001 12:44:39 -0600
From: Martin McWhorter <[email protected]>
To: Pete Zaitcev <[email protected]>,
linux-kernel <[email protected]>
Subject: Re: Possible Bug: 2.4.14 USB Keyboard

Quoted 1 line

ok, so no usbkbd, it seems. But still, do lsmod too, please.

Quoted 7 lines

[root@m_mcwhorter m_mcwhorter]# /sbin/lsmod
Module Size Used by

emu10k1                49584   0  (autoclean)
sr_mod                 13968   0  (autoclean)
ac97_codec              9248   0  (autoclean) [emu10k1]
soundcore               3376   4  (autoclean) [emu10k1]
usbkbd                  2944   0  (unused)

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

YES! Kill this bastard (the best of all is to use rm(1), then reboot).

Quoted 7 lines

[...]

mousedev                3936   1
keybdev                 1728   0  (unused)
hid                    12576   0  (unused)
input                   3136   0  [usbkbd mousedev keybdev hid]
usb-uhci               21344   0  (unused)
usbcore                49184   1  [usbkbd hid usb-uhci]

Dunno how, but usbkbd often manages to disable hid. Never let it get built. We do have reports of people who have keyboards not working with hid, very infrequently. Of course, those guys prefer just to build usbkbd than to help figuring why hid does not work. If not for that, usbkbd would be removed from kernel sources long ago.

-- Pete

#9 lore raw
In reply to Martin McWhorter
Quoted 13 lines · Pete Zaitcev
Quoted 6 lines

Do you have the keybdev module loaded? Also, don't load the usbkbd module, if you load hid ...

Signature · 2 lines
Vojtech Pavlik
SuSE Labs

There is a small problem with this approach: users have no clue how to control what modules are loaded, hotplug loads whatever was built (and recorded in modules.usbmap), and some users have keyboards that plainly refuse to work with hid, therefore vendors have to build both modules.

Quoted 7 lines

See this little gem, for instance:
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=55878

I suspect some distributions can get away with "load the right module" approach because their userbase is so small and technical that they do not hit these cases often. I think something needs fixing in hid.

Interesting. Could you by any chance try to run the 'evtest' program (i can send it to you if you don't have it handy) on the /dev/input/event device created for this keyboard? And/or dmesg with DEBUG enabled in hid-core.c? Also, latest kernels should make even the extra keys of this keyboard work ...

Signature · 2 lines
Vojtech Pavlik
SuSE Labs
#10 lore raw
In reply to Martin McWhorter

Pete,

Quoted 6 lines
Quoted 2 lines

usbkbd 2944 0 (unused)

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

YES! Kill this bastard (the best of all is to use rm(1), then reboot).

rm /lib/modules/2.4.14/kernel/drivers/usb/usbkbd.o

reboot

HP usb-keyboard still does not work. Now the kernel that it does work with is 2.4.2 from redhat's tree. I have not tried it with a vanilla 2.4.2

Now when I do an
[root@m_mcwhorter m_mcwhorter]# /sbin/lsmod
Module Size Used by

emu10k1                49584   0  (autoclean)
sr_mod                 13968   0  (autoclean)
ac97_codec              9248   0  (autoclean) [emu10k1]
soundcore               3376   4  (autoclean) [emu10k1]
autofs                  9184   1  (autoclean)
8139too                13152   1  (autoclean)
ipchains               31232   0
ide-scsi                7712   0
scsi_mod               86256   2  [sr_mod ide-scsi]
ide-cd                 26624   0
cdrom                  27328   0  [sr_mod ide-cd]
mousedev                3936   1
keybdev                 1728   0  (unused)
hid                    12576   0  (unused)
input                   3136   0  [mousedev keybdev hid]
usb-uhci               21344   0  (unused)
usbcore                49184   1  [hid usb-uhci]

Martin

#11 lore raw
In reply to Martin McWhorter

Kinda sorta partial success

Quoted 2 lines

"make modules_install", but this time rename hid.o into hid.hidden. Let me know if this fixes the problem.

I went ahead and did this. Booted up and got the expected error message when HID tried to load. Keyboard works but USB mouse ofcourse does not. So I went and renamed hid.hidden to hid.o and loaded it. Now my USB keyboard and USB mouse are working.

I suspect it has something to do with the order the modules are loaded? hid.o must be last? I am just guessing.

I suppose I can edit the rc.sysinit to load hid AFTER usbkbd is loaded.

Martin

#2 lore raw
In reply to Greg KH

Pete,

Quoted 1 line

Try to rename /sbin/hotplug into something else _temporarily_,

Gave this a try. No luck. Interestingly nothing apperently stopped working.

But I did find something that did. Remove the loading of hid in rc.sysinit and add it the the end of rc.local.

Thanks alot Pete,
Martin