nflt_format and fdisk ???
Useing a doc2000 device (32Mb) and a kernel v2.4.14.
After insert some MTD modules :
mtdcore docecc doc2000 mtdchar mtdblock and nftl; I run nflt_format to format my doc2000 chip; but it complain :Erasesize not 8Kb - I'm confused!
For someone's advice I skip the erasesize check in nftl_format.c. so nftl_format works well.
but when I run fdisk on /dev/nftla.
it's say :
You will not be able to write partition table.
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel Building a new DOS disklabel.Changes will remain in memory only,until you decide to write them.After that, of course,the previous content won't be recoverable.
Command (m for help):
Even if I created a partition and enter "w",the partition also can not be writed into /dev/nftla.
run nftldump on /dev/mtd0:
NFTL Media Header found at offset 0x00000000:
NumEraseUnits: 2048
FirstPhysicalEUN:0
Formatted Size:33488896
UnitSizeFactor: 0xff
Second NFTL Media Header found at offset 0x00004000 Unit 0 is free
Unit 1 is free
...
...
��н����ְ����
http://www.englishtown.com/master/home/courseoverview.asp?etag=TOCN&ctr=cn
===============================================
�ֻ������ǵ��ʣ��Ӵ˽��Ѳ��óһ�����֡������ʡ�
���� 163�������ʡ��ֻ����� ����
�� �ֻ�������ǵ��������ַ���������
�� �������������ֻ����ţ���ʱ�����ʼ��Ľ������
�� ���������κ���ҵ����
�� ����İ����շѷ�ʽ�����ÿ��ֻ��5Ԫ
���������
http://vip.163.net/mobile/mobile.htm
===============================================