Skip to contentSkip to conversation

2.4.14 cpia driver IS broke

DISCUSSION Joe 2 participants 3 messages Nov 19, 2001 – Nov 20, 2001

lore
Share & tools
lore

Joe

author
#0 lore raw

Earlier this week I reported cpia driver not finidng the /dev/video0 as a bug. I did a little research and at first I thought it was RH 7.2 or the linux kernel, but it is not RH it is the linux kernel. The cpia driver in 2.4.14 is broke! (at least on my system)

This is the driver for the webcam II parallel port module.

(From 2.4.13) The output of the file /proc/cpia/video0 should show the following:

cat /proc/cpia/video0 |head
read-only
-----------------------

V4L Driver version:       0.7.4
CPIA Version:             1.20 (1.0)
CPIA PnP-ID:              0553:0002:0100
VP-Version:               1.0 0100
system_state:             0x02
grab_state:               0x00
stream_state:             0x00
fatal_error:              0x00

Current Directory = ~

but it does not, in fact in 2.4.14 it shows CPIA Version: 0.00 and everything else is 0 as well.

I have reverted back to 2.4.13 but would like to let the maintainers know. If you look at the 2.4.14 patch the code for the cpia driver has changed. I am not sure if it is the cpia driver itselef or the video subsystem (v4l/v4l2). If anyone knows how to contact the maintainers and let them know that this code is not working great.

zcat /public/untarred/patch-2.4.14.gz |grep cpia |head
diff -u --recursive --new-file v2.4.13/linux/drivers/media/video/cpia.c linux/drivers/media/video/cpia.c
--- v2.4.13/linux/drivers/media/video/cpia.c Tue Oct 9 17:06:51 2001 +++ linux/drivers/media/video/cpia.c Thu Oct 25 13:53:47 2001
- proc_cpia_create();
- request_module("cpia_pp");
- request_module("cpia_usb");

oh I am not on the list
thanks
Joe

#1 lore raw

It's the new parport code in 2.4.14 which breaks things.
I haven't been able to use my Webcam drivers either since 2.4.14. And after some research in the parport code I found that something is broken with the new (2.4.14) code when doing ECP transfers (maybe EPP as well).

Quoted 50 lines · Joe

Earlier this week I reported cpia driver not finidng the /dev/video0 as a bug. I did a little research and at first I thought it was RH 7.2 or the linux kernel, but it is not RH it is the linux kernel. The cpia driver in 2.4.14 is broke! (at least on my system)

This is the driver for the webcam II parallel port module.

(From 2.4.13) The output of the file /proc/cpia/video0 should show the following:

cat /proc/cpia/video0 |head
read-only
-----------------------

V4L Driver version:       0.7.4
CPIA Version:             1.20 (1.0)
CPIA PnP-ID:              0553:0002:0100
VP-Version:               1.0 0100
system_state:             0x02
grab_state:               0x00
stream_state:             0x00
fatal_error:              0x00

Current Directory = ~

but it does not, in fact in 2.4.14 it shows CPIA Version: 0.00 and everything else is 0 as well.

I have reverted back to 2.4.13 but would like to let the maintainers know. If you look at the 2.4.14 patch the code for the cpia driver has changed. I am not sure if it is the cpia driver itselef or the video subsystem (v4l/v4l2). If anyone knows how to contact the maintainers and let them know that this code is not working great.

zcat /public/untarred/patch-2.4.14.gz |grep cpia |head
diff -u --recursive --new-file v2.4.13/linux/drivers/media/video/cpia.c linux/drivers/media/video/cpia.c

drivers/media/video/cpia.c Thu Oct 25 13:53:47 2001 renamed from linux/drivers/media/video/cpia.c Tue Oct 9 17:06:51 2001 +0 -3
- proc_cpia_create();
- request_module("cpia_pp");
- request_module("cpia_usb");

oh I am not on the list
thanks
Joe

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

author
#2 lore raw
In reply to Joe

Well that would explain the bug. Does anyone have a fix? Other than reverting back?

Joe

Quoted 56 lines

It's the new parport code in 2.4.14 which breaks things.
I haven't been able to use my Webcam drivers either since 2.4.14. And after some research in the parport code I found that something is broken with the new (2.4.14) code when doing ECP transfers (maybe EPP as well).

Quoted 50 lines · Joe

Earlier this week I reported cpia driver not finidng the /dev/video0 as a bug. I did a little research and at first I thought it was RH 7.2 or the linux kernel, but it is not RH it is the linux kernel. The cpia driver in 2.4.14 is broke! (at least on my system)

This is the driver for the webcam II parallel port module.

(From 2.4.13) The output of the file /proc/cpia/video0 should show the following:

cat /proc/cpia/video0 |head
read-only
-----------------------

V4L Driver version:       0.7.4
CPIA Version:             1.20 (1.0)
CPIA PnP-ID:              0553:0002:0100
VP-Version:               1.0 0100
system_state:             0x02
grab_state:               0x00
stream_state:             0x00
fatal_error:              0x00

Current Directory = ~

but it does not, in fact in 2.4.14 it shows CPIA Version: 0.00 and everything else is 0 as well.

I have reverted back to 2.4.13 but would like to let the maintainers know. If you look at the 2.4.14 patch the code for the cpia driver has changed. I am not sure if it is the cpia driver itselef or the video subsystem (v4l/v4l2). If anyone knows how to contact the maintainers and let them know that this code is not working great.

zcat /public/untarred/patch-2.4.14.gz |grep cpia |head
diff -u --recursive --new-file v2.4.13/linux/drivers/media/video/cpia.c linux/drivers/media/video/cpia.c

drivers/media/video/cpia.c Thu Oct 25 13:53:47 2001 renamed from linux/drivers/media/video/cpia.c Tue Oct 9 17:06:51 2001 +0 -3
- proc_cpia_create();
- request_module("cpia_pp");
- request_module("cpia_usb");

oh I am not on the list
thanks
Joe

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/