Skip to contentSkip to conversation

Dual Athlon: Kernel 2.4.14 IDE problems

DISCUSSION Paul G. Allen 4 participants 4 messages Nov 20, 2001 – Nov 27, 2001

lore
Share & tools
lore
#0 lore raw

I just compiled and installed a vanilla 2.4.14 kernel (nope, I haven't tweaked this one yet :). Just as a reminder, I have a Tyan Thunder K7 with 2 1.4GHz Athlons (_NOT_ MP or XP). It has an IBM DTLA-307030 Ultra100 IDE drive on the Ultra100 IDE interface.

The kernel seems to boot with DMA enabled for this drive which causes frequent system lockups. This is the same problem I had with kernels through 2.4.9 (including the ac series). Disabling DMA (hdparm -d0 /dev/hda) solves the problem.

Is this a hardware issue with the MP chipset (I have not kept up to date on AMD errata due to other projects), or is this drive one of the known IDE drives that do not properly support DMA? If a chipset issue, should the kernel not detect the problem and disable DMA?

PGA

Signature · 4 lines
Paul G. Allen
UNIX Admin II/Programmer
Akamai Technologies, Inc.
www.akamai.com
#1 lore raw

We use 20 GB Western Digitals on our dual Athlons. The chipset does support DMA and it has been quite stable. Therefore, I would direct blame toward the drive.

-- Brian

Quoted 16 lines · Paul G. Allen

I just compiled and installed a vanilla 2.4.14 kernel (nope, I haven't tweaked this one yet :). Just as a reminder, I have a Tyan Thunder K7 with 2 1.4GHz Athlons (_NOT_ MP or XP). It has an IBM DTLA-307030 Ultra100 IDE drive on the Ultra100 IDE interface.

The kernel seems to boot with DMA enabled for this drive which causes frequent system lockups. This is the same problem I had with kernels through 2.4.9 (including the ac series). Disabling DMA (hdparm -d0 /dev/hda) solves the problem.

Is this a hardware issue with the MP chipset (I have not kept up to date on AMD errata due to other projects), or is this drive one of the known IDE drives that do not properly support DMA? If a chipset issue, should the kernel not detect the problem and disable DMA?

PGA

#2 lore raw

I recently had a similar with the 2.4.14 kernel when I added a 80GB Maxtor drive to the machine on an ABIT BP6 Board with the Highpoint 366 Controller. The Drive was installed as the Master on the Highpoint. The Highpoint was not in bootable mode. After I had installed the Drive, Fdisked and formated and beguan loading data to it. The machine expirenced a strange lockup. The machine being unresponsive, I hit the reset. Well it turned out that as it came backup it tripped over the new drive, because it was unable to FSCK it at all. Even single user mode could no l.onger address the drive. It kept throwing an error when addressing the drive: about chipset support (I aplogise for not having the exact error text, it was before I joined the list). In any case to fix this error I had to move the drive to the standard IDE interface on the board(the BP6 has 2 standard IDE, and 2 ata66 Ports)

Quoted 29 lines · Brian

We use 20 GB Western Digitals on our dual Athlons. The chipset does support DMA and it has been quite stable. Therefore, I would direct blame toward the drive.

-- Brian

Quoted 10 lines · Paul G. Allen

I just compiled and installed a vanilla 2.4.14 kernel (nope, I haven't tweaked this one yet :). Just as a reminder, I have a Tyan Thunder K7 with 2 1.4GHz Athlons (_NOT_ MP or XP). It has an IBM DTLA-307030 Ultra100 IDE drive on the Ultra100 IDE interface.

The kernel seems to boot with DMA enabled for this drive which causes frequent system lockups. This is the same problem I had with kernels through 2.4.9 (including the ac series). Disabling DMA (hdparm -d0 /dev/hda) solves the problem.

Quoted 6 lines

Is this a hardware issue with the MP chipset (I have not kept up to date on AMD errata due to other projects), or is this drive one of the known IDE drives that do not properly support DMA? If a chipset issue, should the kernel not detect the problem and disable DMA?

PGA

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#3 lore raw
In reply to Paul G. Allen
Quoted 9 lines · Paul G. Allen

I just compiled and installed a vanilla 2.4.14 kernel (nope, I haven't tweaked this one yet :). Just as a reminder, I have a Tyan Thunder K7 with 2 1.4GHz Athlons (_NOT_ MP or XP). It has an IBM DTLA-307030 Ultra100 IDE drive on the Ultra100 IDE interface.

The kernel seems to boot with DMA enabled for this drive which causes frequent system lockups. This is the same problem I had with kernels through 2.4.9 (including the ac series). Disabling DMA (hdparm -d0 /dev/hda) solves the problem.

Paul, just as a thought, is the 32 bit interface enabled on that drive? I dimly remember that trying to run DMA through a 16 bit (default?) interface could result in a learning experience.

Signature · 3 lines
bill davidsen <[email protected]>
  CTO, TMR Associates, Inc
Doing interesting things with little computers since 1979.