Skip to contentSkip to conversation

hiding arp for server farms

DISCUSSION Adrian Daminato 2 participants 2 messages Nov 28, 2001

lore
Share & tools
lore
#0 lore raw

Okay, I've seen similar posts to this, but none of them provide a solution that I can use.

I'm running several 2.2 machines behind a Radware load balancer, which uses something called "local triangulation". Basically the Radware responds to ARP requests for the IP of the farm, passes the packet to one of the servers, and the server responds directly to the client. Each server has an aliased interface on the loopback for the IP of the farm, and /proc/sys/net/ipv4/conf/all/hidden and lo/hidden are set to 1. That works, great, no problems.

Now, introduce an unpatched 2.4.x kernel. The hidden option no longer exists, and for ease of operating a production environment, we prefer to use stock kernels straight from kernel.org, no patches at all. I've tried many different suggestion from the list:

1) ifconfig eth0 -arp
We have over 60 servers on the subnet these farms are on, and they need to
be able to communicate with each other. When I do this, I can't talk to other servers on the network, and keeping an /etc/ethers file up to date is a daunting task, and not practical.

2) arp_filter
I tried using it in a couple of ways, but there doesn't appear to be very
good documentation. I was hoping this would provide the same functionality of the hidden in the 2.2 kernels for our current setup, but it doesn't appear to

3) I even tried adding the 'hidden' patch available, to put the hidden functionality back in the 2.4.x kernel (currently I'm testing using a 2.4.9 kernel). It doesn't appear to work properly either, hosts on the local network can't ping the server farm, and hosts outside the network although able to ping the server farm, cannot ping the real IP of the host. It's kind of a weird problem.

Is there any way to have this work on an unpatched 2.4.x kernel? Any documentation/examples for arp_filter, how it works, how it can be implemented for this?

Any help would be appreciated. Thanks.

Signature · 8 lines
Adrian Daminato 
Tucows International Corp.
http://www.tucows.com
Tel: (416) 535-0123
Fax: (416) 531-5584

Beauty awakens the soul to act.
                 - Dante
#1 lore raw
Quoted 16 lines · Adrian Daminato

Okay, I've seen similar posts to this, but none of them provide a solution that I can use.

I'm running several 2.2 machines behind a Radware load balancer, which uses something called "local triangulation". Basically the Radware responds to ARP requests for the IP of the farm, passes the packet to one of the servers, and the server responds directly to the client. Each server has an aliased interface on the loopback for the IP of the farm, and /proc/sys/net/ipv4/conf/all/hidden and lo/hidden are set to 1. That works, great, no problems.

Now, introduce an unpatched 2.4.x kernel. The hidden option no longer exists, and for ease of operating a production environment, we prefer to use stock kernels straight from kernel.org, no patches at all. I've tried many different suggestion from the list:

Quoted 9 lines

1) ifconfig eth0 -arp
We have over 60 servers on the subnet these farms are on, and they need to
be able to communicate with each other. When I do this, I can't talk to other servers on the network, and keeping an /etc/ethers file up to date is a daunting task, and not practical.

2) arp_filter
I tried using it in a couple of ways, but there doesn't appear to be very

I have tested this setup and had the same problems on a 2.4.12 kernel. I tried out a few things and could not resolve this issue. Fortunately for me the client is running solaris and that does not have this bug.
Sorry but I have no solution...

Stefan - ZipKid - Goethals