Skip to contentSkip to conversation

i2o and Promise SuperTrak SX6000 ata raid controller

DISCUSSION Thomas Mueller 2 participants 2 messages Nov 29, 2001

lore
Share & tools
lore
#0 lore raw

Hi,

I've got quite the same problem, but it's not as simple as vojtech said.

I have, of course, switched the controller mode to 'other OS' and the controller is being recognized by the system. Everything is fine as long as I use kernel 2.4.4, the raid array is being recognized and working. Whenever I switch to 2.4.13-ac8, 2.4.14 or 2.4.15-pre7 the system freezes with kernel panic, so there seems to be a problem with current kernels.
Any suggestions ???

Thanks,

Thomas

#1 lore raw
Quoted 3 lines · Thomas Mueller

I have, of course, switched the controller mode to 'other OS' and the controller is being recognized by the system. Everything is fine as long as I use kernel 2.4.4, the raid array is being recognized and working.

On the same note, does anybody know whether a basic "i2o-HOWTO" exists and where it can be found?

Thanks

Eugenio (going mad with an AMI Megaraid)

Signature · 3 lines
Q:  How do you play religious roulette?
A:  You stand around in a circle and blaspheme and see who gets struck
    by lightning first.