Skip to contentSkip to conversation

Kernel freezing....

DISCUSSION Jorge Carminati 1 participant 1 message Dec 6, 2001 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

François Wrote:

Quoted 10 lines

okay, I kinda see the problem now. Would you consider using a 2.4.16 kernel, optimized for i386, and compiled with gcc 2.95.3 ? If that solves the problem, you might want
to compile your kernel for i586 ; if that works
again, you might want to try optimizing for K6.
Don't go higher than that though ; optimizing for i686 or Athlon will break.
And please don't use another gcc ; 2.95.3 is the most reliable right now, eventhough "some" 2.96 seem to work fine, but I suspect they might not, in your case.

Ok François, I´ll try it tonight, first attempt compiled for i386. Tomorrow I´ll post the results.

Quoted 8 lines

the key is :

(duron or athlon) and via and (PSU sloppiness or "not so high grade" RAM),

which is the case in too many notebooks.

Ok, you spend U$ 1800 (that´s the price here) for a "not so high grade" Compaq memory... sounds lamentable

Quoted 1 line

PS : please, please keep me informed, I think I'm uncovering an

unknown

Sure I´ll do.

Quoted 4 lines

bug at the hardware level, but I'm not sure *yet*. FYI it's not a blocking problem, at least when running Linux, it only keeps you from using the Athlon/Duron at full speed (i.e. full kernel/compiler optimizations).

Anyway, I installed a fresh Red Hat 7.2 copy, which doesn´t comes optimized for AMD, but the freeze is there...

Regards,
Jorge Carminati.

__________________________________________________
Do You Yahoo!?
Send your FREE holiday greetings online!
http://greetings.yahoo.com