Kernel 2.4.x problem
Hi there,
I didn't know what to do to fix my problem, so I thought I write to you.... So the following is my Problem: ..
Long years ago, I bought every time, Red Hat Linux lalala.. and so on, and as I bought Red Hat Linux 7.2 there came the biggest problem I ever had, when I compile kernels or oder progs then one time to the other the whole computers down, and I get a message like this ....
www.usad.li/robin/fehler1.jpg
// fehler2.jpg
// fehler3.jpg
So I didn't knew what to do, in ircnet I asked some people they told me that it could might be a memory problem, so they said I should make a memory test with memtest86 ... so I did, but there where no errors, and the message came every time again, the very strange thing is that this never happend until i setup red hat 7.2
So if you are interested to help me by my problem, It would be graceful if you write back, otherwise, I'll spend again a lot of time, to fix this problem....
uname -a
Linux firebird 2.4.7-10 #1 Thu Sep 6 16:46:36 EDT 2001 i686 unknown
gcc -v
gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-98)
My environment :
AMD xxx 1,2 GHz
512 MB RAM
40 GB Harddisk
Riva TNT 2
and so on (its a futjsu siemens machine )
Sincerely
Robin
PS: besides I'm very sorry for my bad english, but I had no time to correct my writing.... cya
Quoted 5 lines
AMD xxx 1,2 GHz
512 MB RAM
40 GB Harddisk
Riva TNT 2
and so on (its a futjsu siemens machine )
Are you using the nvidia supplied 3d drivers ?
Quoted 5 lines · Robin Walser
Hi there,
I didn't know what to do to fix my problem, so I thought I write to you.... So the following is my Problem: ..
Quoted 8 lines
Long years ago, I bought every time, Red Hat Linux lalala.. and so on, and as I bought Red Hat Linux 7.2 there came the biggest problem I ever had, when I compile kernels or oder progs then one time to the other the whole computers down, and I get a message like this ....
www.usad.li/robin/fehler1.jpg
// fehler2.jpg
// fehler3.jpg
It would have helped to prefix these lines with: http://
Quoted 5 lines
So I didn't knew what to do, in ircnet I asked some people they told me that it could might be a memory problem, so they said I should make a memory test with memtest86 ... so I did, but there where no errors, and the message came every time again, the very strange thing is that this never happend until i setup red hat 7.2
The "Machine Check" means "internal error, bus error, or bus error detected by external agent".
Verify that your CPU fan is working and your case is well ventilated. Then if it still happens, you can add the boot option "nomce" to disable the machine check exception.
Beyond this, you'll have to get help from someone else.
-Paul
Quoted 15 lines
uname -a
Linux firebird 2.4.7-10 #1 Thu Sep 6 16:46:36 EDT 2001 i686 unknowngcc -v
gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-98)
My environment :
AMD xxx 1,2 GHz
512 MB RAM
40 GB Harddisk
Riva TNT 2
and so on (its a futjsu siemens machine )