Skip to contentSkip to conversation

how to set motherboard chipset registers

DISCUSSION Chris Friesen 3 participants 3 messages Dec 8, 2001

lore
Share & tools
lore
#0 lore raw

I'm just wondering what would be the best way to get/set chipset registers (for tweaking purposes) in linux. What is the proper way to address these things given bit numbers and offsets?

I'm a decent coder, I've done low-level hardware stuff before, but I just don't know where to start with this.

Thanks,

Chris

#1 lore raw
Quoted 3 lines · Chris Friesen

I'm just wondering what would be the best way to get/set chipset registers (for tweaking purposes) in linux. What is the proper way to address these things given bit numbers and offsets?

http://powertweak.sourceforge.net/

Dave.

Signature · 2 lines
| Dave Jones.        http://www.codemonkey.org.uk
| SuSE Labs
#2 lore raw
In reply to Chris Friesen

You can use the userspace utility called 'setpci' which, if run as root, allows you to tweak such things. For insance, say you wanted to set byte register 0x55 to value 0x1c on a pci device who's vendor/device id combo is 1106:3099, you would do:

setpci -d 1106:3099 55.B=1c

To query this register without setting anything, do:

setpci -d 1106:3099 55.B

And, of course, man setpci will sell you more.. :)

Quoted 17 lines · Chris Friesen

I'm just wondering what would be the best way to get/set chipset registers (for tweaking purposes) in linux. What is the proper way to address these things given bit numbers and offsets?

I'm a decent coder, I've done low-level hardware stuff before, but I just don't know where to start with this.

Thanks,

Chris
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/