Skip to contentSkip to conversation

2.5.1-pre8: lockups whem mounting scsi cdrom

DISCUSSION Carl Scarfoglio 2 participants 2 messages Dec 10, 2001 – Dec 11, 2001

lore
Share & tools
lore
#0 lore raw

HW: MB Asus A7V, 256MB Ram, Athlon 800 MHz,four HD attache to standard ATA and ATA-100 Promise controller, 1 Realtek 8029 ethernet adapter, Adaptec 2904 (AIC 7850), 1 scsi CD-writer (Waitec. i.e. Philips 2200 or so), Teac scsi CD-ROM, 1 Mustek A3 plugged to external scsi connector. The Adaptec has Irq 11 exclusilively.
SW: SuSE 6.3 with some changes, gcc 2.9.3.

I am running 2.5.1-pre8. I cannot mount data CD. When I execute the mount command, on any drive, a hard lockup follows. No messages from the mount command, no noise from the drives.
The PC hangs solid: keyboard and mouse are dead, no telnet access, when in X the session is dead. I must flip the power switch.

But I can write CD's with cdrecord and play audio CD's!!

Kernel 2.5.0 does not have this problem.

TIA

Carlo Scarfoglio

#1 lore raw
Quoted 7 lines · Carl Scarfoglio

HW: MB Asus A7V, 256MB Ram, Athlon 800 MHz,four HD attache to standard ATA and ATA-100 Promise controller, 1 Realtek 8029 ethernet adapter, Adaptec 2904 (AIC 7850), 1 scsi CD-writer (Waitec. i.e. Philips 2200 or so), Teac scsi CD-ROM, 1 Mustek A3 plugged to external scsi connector. The Adaptec has Irq 11 exclusilively.
SW: SuSE 6.3 with some changes, gcc 2.9.3.

Quoted 5 lines

I am running 2.5.1-pre8. I cannot mount data CD. When I execute the mount command, on any drive, a hard lockup follows. No messages from the mount command, no noise from the drives.
The PC hangs solid: keyboard and mouse are dead, no telnet access, when in X the session is dead. I must flip the power switch.

Thanks, I'll take a look.

Quoted 1 line

But I can write CD's with cdrecord and play audio CD's!!

Ok

Signature · 1 line
Jens Axboe