Skip to contentSkip to conversation

Interesting problem with intervals and high-res-timers

DISCUSSION george anzinger 1 participant 1 message Dec 11, 2001

lore
Share & tools
lore
#0 lore raw

In testing the latest high-res-timer code on a 2-way SMP machine I have found that it is easy to trigger an NMI oops. This happens when the interval is coded to be very short. Currently I have the resolution set to 1 micro second. The test code is trying to set up a timer with 1 micro second interval, something we just don't have the horse power to do.

This puts the cpu into a loop processing the timer pops and starves the other cpu causing an NMI. (As I understand it, each cpu need to handle at least one interrupt ever 500 ticks to avoid the NMI. Usually (always?) this interrupt is provided by the timer, however, the timer, for some reason, always interrupts on the using (abusing) cpu. (Any one who has a better understanding of the NMI watch dog operation, please help me here.)

Solutions:
It seems prudent to limit the interval so as to keep it large enough to avoid this issue. The problem is that, no matter what the limit is, it can be subverted by starting another timer. I have considered keeping track of all active timers with intervals under a jiffie and sliding the limit based on that, but it seem to me that this is decidedly unpredictable.

The code I currently have measures the supportable interval at boot time and then, when ever a timer is about to be requested whose time will fall in that interval, pushing the timer out (by adding intervals). Alarms skipped by this are accounted for in the overrun counter. However, as I observed above, this is easily defeated by starting another timer.

Comments?

Signature · 3 lines
George           [email protected]
High-res-timers: http://sourceforge.net/projects/high-res-timers/
Real time sched: http://sourceforge.net/projects/rtsched/