Skip to contentSkip to conversation

allocating non-cacheable memory

DISCUSSION Kevin Fry 3 participants 3 messages Dec 20, 2001

lore
Share & tools
lore

Kevin Fry

author
#0 lore raw

What is the best way to allocate some non-cacheable memory for I/O use? Right now we are going to setup a BAT table with a non-cacheable memory region and use that for all I/O, but does linux have a nice neat function to grab a page and set it up non-cacheable for us? I was reading in the archives that the #define PAGE_NOCACHE doesn't work.

thanks!

Kevin

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

#1 lore raw
Quoted 2 lines · Kevin Fry

What is the best way to allocate some non-cacheable memory for I/O use? Right now we are going to setup a BAT table with a non-cacheable memory

If you have a processor with BAT, why do you need non-cached memory?

	-- Dan

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

#2 lore raw
In reply to Kevin Fry

Hi
Setting up a BAT by some asembler code is good.
Or you can use io_block_mapping.
For example
io_block_mapping(0x78000000, 0x78000000, 0x08000000, _PAGE_IO);
It maps phisical address 0x78000000 ~ 0x7FFFFFFF to effective address 0x78000000 ~ 0x7FFFFFFF, No cache.
- Sangmoon Kim -

----- Original Message -----
From: "Kevin Fry" <[email protected]>
To: <[email protected]>
Sent: Thursday, December 20, 2001 10:44 AM
Subject: allocating non-cacheable memory

Quoted 8 lines

What is the best way to allocate some non-cacheable memory for I/O use? Right now we are going to setup a BAT table with a non-cacheable memory region and use that for all I/O, but does linux have a nice neat function to grab a page and set it up non-cacheable for us? I was reading in the archives that the #define PAGE_NOCACHE doesn't work.

Quoted 7 lines

thanks!

Kevin

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/