Skip to contentSkip to conversation

slow CD ripping from moving from 2.4.4 to 2.4.17

DISCUSSION Karol Pietrzak 1 participant 1 message Dec 31, 2001

lore
Share & tools
lore
#0 lore raw

Hello.
Using 2.4.4 up to, I believe, 2.4.14, CD ripping was fine. My Plextor 12/10/32S (S for SCSI) ripped audio CDs at around 25X, even sometimes at 30X. While ripping, my hard drive would work continuously, and so would my CDRW drive.

Now with 2.4.17, my hard drive can't keep up with my CDRW drive:
everything happens in bursts. My CDRW drive starts ripping as fast as possible, but my hard drive doesn't do anything (0-5 seconds). Then, my hard drive decides to start writing, which stops the CD ripping process (5-8 seconds). Now that the hard drive is done, the CDRW drive continues ripping... for 4 seconds and the process continues over and over again. This brings down the ripping speed down to ~18X, a far cry from the 30X achieved with 2.4.4 and very close to the writing speed of my CDRW drive (12X), which is ridiculous.

As stated before, ripping is fine in 2.4.4 (which I still keep around because of this problem). What does help in 2.4.17, however, is manually entering running the 'sync' command ever second or so on another console. This makes the ripping process a lot more "continuous," like 2.4.4.

I can't burn CDs in 2.4.4, however, because that freezes up my computer, for some reason. That happens a lot less often in 2.4.17 (but that's another matter).

I am using SuSE 7.2 Pro with the latest cdda2wav (1.11a12).

Linux linux 2.4.17 #2 Fri Dec 21 17:14:19 EST 2001 i586 unknown

Gnu C                  2.95.3
Gnu make               3.79.1
binutils               2.10.91.0.4
util-linux             2.11b
mount                  2.11b
modutils               2.4.5
e2fsprogs              1.19
reiserfsprogs          3.x.0k-pre15
PPP                    2.4.0
Linux C Library        x    1 root     root      1343073 May 11  
2001 /lib/libc.so.6
Dynamic linker (ldd)   2.2.2
Procps                 2.0.7
Net-tools              1.60
Kbd                    1.04
Sh-utils               2.0
Modules Loaded         ppp_async ppp_generic slhc nls_cp437 vfat 

fat

I am using a Pentium I 233 with 32MB of RAM. I have an Advansys Ultra SCSI card with 3 devices total hooked up to it.

Anyone have any ideas? Anything I can do?

Thank you ahead of time to anyone willing to help.

--
Karol Pietrzak
PGP KeyID: 3A1446A0