reiserfs oops at init
Quoted 1 line · Chris Mason
Ok, first grab the latest reiserfsck 3.x.1a from
The SuSE 7.3 version was 3.x.0k-pre9-28, which, knowing SuSE, was probably a heavily patched version of the reiser distribution.
I've upgraded to the version you suggest.
Quoted 2 lines
If you want to send the errors from reiserfsck --check, I can confirm things a little better.
It's going to be a big file... do you just want the tail?
Thanks,
Chris
Quoted 7 lines · On Monday, January 14, 2002 10:48:49 AM -0700 Chris Worley…
Quoted 1 line · Chris Mason
Ok, first grab the latest reiserfsck 3.x.1a from
The SuSE 7.3 version was 3.x.0k-pre9-28, which, knowing SuSE, was probably a heavily patched version of the reiser distribution.
Not too heavily, we try to keep the utils patches to a minimum ;-)
Quoted 10 lines
I've upgraded to the version you suggest.
Quoted 2 lines
If you want to send the errors from reiserfsck --check, I can confirm things a little better.
It's going to be a big file... do you just want the tail?
Lets start with the tail, my internet connection isn't that hot right now.
-chris
Quoted 9 lines · Chris Mason
Quoted 7 lines
Quoted 3 lines
If you want to send the errors from reiserfsck --check, I can confirm things a little better.
It's going to be a big file... do you just want the tail?
Lets start with the tail, my internet connection isn't that hot right now.
Every error I could see was of the form:
bad_directory_item: block 141874: item 698385 744805 0x1 DIR (3), len 350, location 2576 entry count 14, fsck need 0, format old has entry ".." with wrong deh_state 140744 - expected 4 - fixed
This goes on for ~11MB.
The tail is:
free block count 3306944 mismatches with a correct one 4783644. on-disk bitmap does not match to the correct one. 1476700 bits differ
With the new reiserfs version, it actually says "fixed", the older version didn't say that (except at the beginning), and I don't think they really fixed anything.
Although those "free block count mismatch/correct" numbers look like they did for all previous runs, this run with the new software said nothing of (something like) "10 ... must be fixed with --rebuild-tree". It still doesn't boot.
On to the "--rebuild-tree" pass. Wish me luck.
Chris