Skip to contentSkip to conversation

loading linux in FADS860T board through u-boot-1.0.0

U-Boot-Users RamanaYV 3 participants 3 messages Jan 17, 2002 – Mar 17, 2004

lore
Share & tools
lore

RamanaYV

author
#0 lore raw

I was trying to load linux-2.4.4 in FADS860T board using u-boot-1.0.0. I have settted environment variables like ipaddr,serverip,ethaddr,bootargs bootfile and saved the environment.
Then,i typed tftpboot to download image from server.
Then,i typed bootm to start the booting process.
System is stucked by showing "Uncompressing Kernel Image ... OK"

sequence of these events r given below.can u please suggest, what i need to do to come out from this.
Thank you.

U-Boot 1.0.0 (Mar 17 2004 - 14:06:16)

CPU: XPC86xxxZPnnD4 at 40 MHz: 4 kB I-Cache 4 kB D-Cache FEC present
Board: FADS with db MPC821, MPC860 / MPC860SAR / MPC860T rev PILOT
DRAM: (4 MB SDRAM) 4M 60ns DRAM: 8 MB
FLASH: 2 MB
In: serial
Out: serial
Err: serial
Net: FEC ETHERNET

=>printenv
stdin=serial
stdout=serial
stderr=serial
Environment size: 41/16380 bytes

=>setenv ipaddr 192.168.1.115
=>setenv serverip 192.168.1.87
=>setenv ip 192.168.1.115
=>setenv ethaddr 00:30:bf:01:02:d0
=>setenv bootargs "root=/dev/nfs rw nfsroot=192.168.1.87:/opt/eldk/ppc8xx ip=192 .168.1.115:192.168.1.87:192.168.1.115:255.255.255.0:ppc::off" =>setenv bootfile "pImage_fads_fec"

=>saveenv
Saving Environment to Flash...
Un-Protected 1 sectors
Erasing Flash...
. done
Erased 1 sectors
Writing to Flash... done
Protected 1 sectors

=>printenv
stdin=serial
stdout=serial
stderr=serial
ipaddr=192.168.1.115
serverip=192.168.1.87
ip=192.168.1.115
ethaddr=00:30:bf:01:02:d0
bootargs="root=/dev/nfs rw nfsroot=192.168.1.87:/opt/eldk/ppc8xx ip=192.168 1.11
5:192.168.1.87:192.168.1.115:255.255.255.0:ppc::off" bootfile="pImage_fads_fec"
Environment size: 287/16380 bytes

=>tftpboot
TFTP from server 192.168.1.87; our IP address is 192.168.1.115 Filename 'pImage_fads_fec'.
Load address: 0x100000
Loading: T invalid RARP header #####################################################TX timeout
############
#######################
done
Bytes transferred = 448321 (6d741 hex)

=>bootm
## Booting image at 00100000 .
Image Name: Linux-2.4.4
Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 448257 Bytes = 437.8 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK

#1 lore raw
Quoted 2 lines · In message <3C46A877.000003.01284@ramanayv> you wrote:

System is stucked by showing "Uncompressing Kernel Image ... OK"

...

Quoted 2 lines

sequence of these events r given below.can u please suggest, what i need to do to come out from this.

You should read the FAQ. See:
http://www.denx.de/twiki/bin/view/DULG/LinuxHangsAfterUncompressingKernel

Wolfgang Denk

Signature · 4 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
The only person who always got his work done by Friday
                                                 was Robinson Crusoe.
#2 lore raw

R: [U-Boot-Users] loading linux in FADS860T board through u-boot-1.0.0

In reply to RamanaYV
Quoted 16 lines

-----Messaggio originale-----
Da: u-boot-users-admin at lists.sourceforge.net [mailto:u-boot-users-admin at lists.sourceforge.net]Per conto di RamanaYV
Inviato: gioved? 17 gennaio 2002 11.33
A: u-boot-users at lists.sourceforge.net
Oggetto: [U-Boot-Users] loading linux in FADS860T board through u-boot-1.0.0

I was trying to load linux-2.4.4 in FADS860T board using u-boot-1.0.0.

I have settted environment variables like
ipaddr,serverip,ethaddr,bootargs
bootfile and saved the environment.

Quoted 6 lines

Then,i typed tftpboot to download image from server.

Then,i typed bootm to start the booting process.

System is stucked by showing "Uncompressing Kernel Image ... OK"

Is CONFIG_CLOCKS_IN_MHZ defined ???
If I remember, should be defined until linux 2.4.5. I had the same problem with 2.4.19 (it was defined).

Enzo

Quoted 160 lines

sequence of these events r given below.can u please suggest, what i need to
do to come out from this.

Thank you.

U-Boot 1.0.0 (Mar 17 2004 - 14:06:16)

CPU: XPC86xxxZPnnD4 at 40 MHz: 4 kB I-Cache 4 kB D-Cache FEC present

Board: FADS with db MPC821, MPC860 / MPC860SAR / MPC860T rev PILOT

DRAM: (4 MB SDRAM) 4M 60ns DRAM: 8 MB

FLASH: 2 MB

In: serial

Out: serial

Err: serial

Net: FEC ETHERNET

=>printenv

stdin=serial

stdout=serial

stderr=serial

Environment size: 41/16380 bytes

=>setenv ipaddr 192.168.1.115

=>setenv serverip 192.168.1.87

=>setenv ip 192.168.1.115

=>setenv ethaddr 00:30:bf:01:02:d0

=>setenv bootargs "root=/dev/nfs rw
nfsroot=192.168.1.87:/opt/eldk/ppc8xx
ip=192

.168.1.115:192.168.1.87:192.168.1.115:255.255.255.0:ppc::off"

=>setenv bootfile "pImage_fads_fec"

=>saveenv

Saving Environment to Flash...

Un-Protected 1 sectors

Erasing Flash...

. done

Erased 1 sectors

Writing to Flash... done

Protected 1 sectors

=>printenv

stdin=serial

stdout=serial

stderr=serial

ipaddr=192.168.1.115

serverip=192.168.1.87

ip=192.168.1.115

ethaddr=00:30:bf:01:02:d0

bootargs="root=/dev/nfs rw
nfsroot=192.168.1.87:/opt/eldk/ppc8xx ip=192.168
1.11

5:192.168.1.87:192.168.1.115:255.255.255.0:ppc::off"

bootfile="pImage_fads_fec"

Environment size: 287/16380 bytes

=>tftpboot

TFTP from server 192.168.1.87; our IP address is 192.168.1.115

Filename 'pImage_fads_fec'.

Load address: 0x100000

Loading: T invalid RARP header

#####################################################TX timeout

############

#######################

done

Bytes transferred = 448321 (6d741 hex)

=>bootm

## Booting image at 00100000 .

Image Name: Linux-2.4.4

Image Type: PowerPC Linux Kernel Image (gzip compressed)

Data Size: 448257 Bytes = 437.8 kB

Load Address: 00000000

Entry Point: 00000000

Verifying Checksum ... OK

Uncompressing Kernel Image ... OK

-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id70&alloc_id638&op=click
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users