New Affix Release: Affix-0_9pre10

Hello,

Find new affix release Affix-0_9pre10 on
http://affix.sourceforge.net

- additional locks added
- Added Master Slave switch
btctl connectrole [master|slave]
- added timeout for HCI commands (for buggy devices)
- fixed action on receiving DM packet
- added kpatch-2.4.17
- fixed btsrv to be compiled w/o SDP
- added *debmod* & *debapp* rules to compile Debian packages
- !!! added additional installation notes

br, Dmitry

 Dmitry Kasatkin
 Nokia Research Center / Helsinki
 Mobile: +358 50 4836365
 E-Mail: [email protected]


NB. Now I am Dmitry Kasatkin instead of Dmitri Kassatkine

Hi,

Find new affix release Affix-0_9pre10 on
http://affix.sourceforge.net

Version 0.9 [01.02.2002]

!!! NOTES
Do not patch the kernel with this version.
Patch will be available soon

- btctl shows all available devices in the system
btctl -i bt0
"-i" this options is used to handle certain devices
- btuarto changed by btuart.o & btuart_cs.o
btctl open_uart /dev/ttyS0
btctl close_uart /dev/ttyS0
commands are use to open Bluetooth adapters having UART interface
- Added HCI socket (internally used only now) BTPROTO_HCI
- Added some object locks
- Added btsdp_browse
Use
btsdp_browse <bda | local>
to browse SDP server data base

br, Dmitry

Dmitry Kasatkin
Nokia Research Center / Helsinki
Mobile: +358 50 4836365
E-Mail: [email protected]

Hi,

Here is small patch. Apply it for Affix-0_9
Otherwise RFCOMM will not work.

br, Dmitry

Dmitry Kasatkin
Nokia Research Center / Helsinki
Mobile: +358 50 4836365
E-Mail: [email protected]

diff -ur Affix-0_9/kernel/btcore/af_hci.c affix/kernel/btcore/af_hci.c
@@ -19,7 +19,7 @@
 */
 
 /* 
-   $Id: af_hci.c,v 2.15 2002/02/01 12:56:59 kds Exp $
+   $Id: af_hci.c,v 2.17 2002/02/04 07:46:07 kds Exp $
 
    AF_AFFIX - HCI Protocol Address family for socket interface
 

@@ -499,6 +499,7 @@
 	}
 
 	hsk->hci = hci;
+	hsk->evl->hci = hci;
 
 	DBFEXIT;
 	return err;

diff -ur Affix-0_9/kernel/btcore/l2cap.c affix/kernel/btcore/l2cap.c
@@ -19,7 +19,7 @@
 */
 
 /* 
-   $Id: l2cap.c,v 2.38 2002/02/01 14:16:26 kds Exp $
+   $Id: l2cap.c,v 2.40 2002/02/04 07:50:40 kds Exp $
 
    Link Layer Control and Adaptation Protocol
 

@@ -1248,6 +1248,8 @@
 	if( !hcc_linkup(ch->con) )
 		return 0;
 
+	ch->hdrlen = con->hdrlen + L2CAP_HDR_LEN;
+
 	if( STATE(ch) == CHN_CLOSED ) {
 		ENTERSTATE(ch, CHN_W4_L2CAP_CRSP);
 		l2cap_connect_req(ch->con, get_id(ch), ch->psm, ch->lcid);

@@ -1364,7 +1366,7 @@
 		err = -ENOTCONN;
 		goto exit;
 	}
-
+	DBPRT(DBXMITE, "Headroom is: %d\n", skb_headroom(skb));
 	send_data(ch, skb);
 
  exit:

diff -ur Affix-0_9/kernel/btcore/rfcomm.c affix/kernel/btcore/rfcomm.c
@@ -19,7 +19,7 @@
 */
 
 /* 
-   $Id: rfcomm.c,v 2.53 2002/01/25 13:17:13 kds Exp $
+   $Id: rfcomm.c,v 2.54 2002/02/04 08:33:22 kds Exp $
 
    RFCOMM - RFCOMM protocol for Bluetooth
 

@@ -330,6 +330,8 @@
 	if( !rfcomm_connected(sn) )
 		return 0;
 
+	con->hdrlen = sn->hdrlen + LONG_HDR_SIZE + 1;
+
 	if( STATE(con) == RFCON_CLOSED ) {
 		ENTERSTATE(con, RFCON_W4_CONRSP);
 		con->dlci |= (!sn->initiator & 0x01);	/* set session bit */

@@ -610,6 +612,8 @@
 		while( con && IS_DEAD(con) )
 			con = BTL_NEXT(con);
 		if( con ) {
+			con->hdrlen = sn->hdrlen + LONG_HDR_SIZE + 1;
+
 			/* FIXME: check state here */
 			con->credit_based = 1;
 			con->pops->control_ind(con, TYPE_REQUEST, NULL);/* FIXME: ?? */

@@ -620,6 +624,8 @@
 		rfcomm_con	*next;
 		btl_for_each_next(con, sn->cons, next)
 			if( status == 0 ) {
+				con->hdrlen = sn->hdrlen + LONG_HDR_SIZE + 1;
+
 				if( STATE(con) == RFCON_CLOSED ) {
 					ENTERSTATE(con, RFCON_W4_CONRSP);
 					con->dlci |= (!sn->initiator & 0x01);/* session bit */

diff -ur Affix-0_9/kernel/include/affix/rfcomm.h affix/kernel/include/affix/rfcomm.h
@@ -19,7 +19,7 @@
 */
 
 /* 
-   $Id: rfcomm.h,v 1.21 2002/01/25 14:25:58 kds Exp $
+   $Id: rfcomm.h,v 1.24 2002/02/04 08:33:22 kds Exp $
 
    RFCOMM - RFCOMM protocol for Bluetooth
 

@@ -169,10 +169,10 @@
 	u8		value[0];
 }__PACK__ mcc_frame;
 
-typedef struct cmd_msg {
+typedef struct cmd_frame {
 	short_frame 	short_pkt;
 	mcc_frame 	mcc_pkt;
-}__PACK__ cmd_msg;
+}__PACK__ cmd_frame;
 
 
 /* Multiplexer Control Channel Commands */

@@ -720,7 +720,7 @@
 extern inline struct sk_buff *rfcomm_alloc_cmd_skb(rfcomm_sn *sn, int cmdlen)
 {
 	struct sk_buff	*skb;
-	int		hdrlen = sn->hdrlen + sizeof(cmd_msg);
+	int		hdrlen = sn->hdrlen + sizeof(cmd_frame);
 
 	if( cmdlen+sizeof(mcc_frame) > SHORT_PAYLOAD_SIZE )
 		hdrlen++;

Hi,

Find new affix release Affix-0_91 on
http://affix.sourceforge.net

Version 0.91 [07.02.2002]
- added /etc/modutuls/affix to automate modules load
- RFCOMM moved to separated module
- added PAN profile
- modules names changes -->> check README (modify /etc/pcmcia/config)

br, Dmitry

Dmitry Kasatkin
Nokia Research Center / Helsinki
Mobile: +358 50 4836365
E-Mail: [email protected]

HI,

Kernel paches works as well

br, Dmitry

Dmitry Kasatkin
Nokia Research Center / Helsinki
Mobile: +358 50 4836365
E-Mail: [email protected]

Hi,

Find new affix release Affix-0_92 on
http://affix.sourceforge.net

Version 0.92 [15.02.2002]
- UART protocol fixed
setup proper uart parameters to make uart working example:
stty -F /dev/ttyS0 -crtscts ispeed 57600 ospeed 57600 btctl open_uart /dev/ttyS0

Tested with Philips Truebaby module.

br, Dmitry

Dmitry Kasatkin
Nokia Research Center / Helsinki
Mobile: +358 50 4836365
E-Mail: [email protected]

Hi all,

Find new affix release Affix-0_93 on
http://affix.sourceforge.net

Version 0.93 [22.02.2002]
- [fix] extern inline replaced by static inline
prevent un-optimized compilation problem
- [new] usb driver support any bluetooth deivices
- [fix] btsdp_browse connection establishment
- [new] L2CAP socket can be connected through any Bluetooth adapter

	sockaddr_l2cap {
	... old fields..
	BD_ADDR		local;
	}
	set *local* to Bluetooth address of the adapter to connect through.
	or BDADDR_ANY

- [fix] hci devices are removing well on *btctl close_uart *
- [fix] added locks for l2cap objects
- [fix] compilation problem for older kernel (2.4.7 at least) - headers ...

Br, Dmitry

Dmitry Kasatkin
Nokia Research Center / Helsinki
Mobile: +358 50 4836365
E-Mail: [email protected]

Hi all,

Find new affix release Affix-0_94 on
http://affix.sourceforge.net

Version 0.94 [01.03.2002]
- [changes] /etc/bluetooth -> /etc/affix
- [changes] scripts names in /etc/pcmcia
needs to update /etc/pcmcia/config
consult README
- [new] commands: addpin (sinonym for pincode), rmpin, unbond, pkt_type

br, Dmitry

Dmitry Kasatkin
Nokia Research Center / Helsinki
Mobile: +358 50 4836365
E-Mail: [email protected]

Hi All.

Find new affix release Affix-0_94 on
http://affix.sourceforge.net

Version 0.95 [07.03.2002]
- [fix] changes in /etc/pcmcia/config file
device "affix_uart" to device "affix_uart_cs" bind "affix_uart" to bind "affix_uart_cs" PCMCIA does not work correctly in previouse case
- [new] btctl prints features suported by the module (Audio,...)
- [fix] SDP stuff has been fixed to be compiled with C compiler
- [fix] extra locks added to l2cap and rfcomm modules
- [fix] module counters fixed

br, Dmitry

Dmitry Kasatkin
Nokia Research Center / Helsinki
Mobile: +358 50 4836365
E-Mail: [email protected]

Hi All.

Find new affix release Affix-0_96 on http://affix.sourceforge.net
This version has stability improvement.

GUI environment A.F.E - Affix Frontend Environment available for use.
http://affix.sourceforge.net/afe

Link can be found on Affix WEB site in *Links* section.

Version 0.96 [15.03.2002]
- [new] added field *local* to sockaddr_rfcomm to connect through

	certain Bluetooth adapter
	sockaddr_rfcomm {
	... old fields..
	BD_ADDR		local;
	}
	set *local* to Bluetooth address of the adapter to connect through.
	or BDADDR_ANY

- [new] SDP server works based on MTU
- [fix] SDP Continuation mecahnism - problems on client side. Did not work at all. (e.g. with Ericsson phone)
- [new] btctl prints Affix version

br, Dmitry

Dmitry Kasatkin
Nokia Research Center / Helsinki
Mobile: +358 50 4836365
E-Mail: [email protected]

Hi All.

Find new affix release Affix-0_97 on http://affix.sourceforge.net
*with OBEX client *

GUI environment A.F.E - Affix Frontend Environment available for use.
http://affix.sourceforge.net/afe

Link can be found on Affix WEB site in *Links* section.

Version 0.97 [28.03.2002]
- [new] added OBEX File Transfer support (ls, put, get) commands
- [new] added "browse" command to btctl for service browsing
- [new] added "search" command to btctl for service searching
It works well with Windows Stack from DigiAnswer.
Windows stack does not use PublicBrowseGroup
- [new] server channel for *connect* and OBEX commands is extracted from SDP server to disable this behavior use "-s" or "--nosdp" options
- [fix] OBEX server fixed. it works now.
- [new] kernel 2.4.18 fixed
- [fix] device registration/unregistration in PAN

br, Dmitry

 Dmitry Kasatkin
 Nokia Research Center / Helsinki
 Mobile: +358 50 4836365
 E-Mail: [email protected]

Hi All.

Find new affix release Affix-0_98 on http://affix.sourceforge.net
*with OBEX client *

Now it's possible to send pictures to the Mobile Phone.

GUI environment A.F.E - Affix Frontend Environment available for use.
http://affix.sourceforge.net/afe

Link can be found on Affix WEB site in *Links* section.

Version 0.98 [05.04.2002]
- [new] added *push* command for pushing objects.
E.g. I pushed background pictures for Ericsson T68 phone (picture should be in GIF format for Ericsson phone). btctl push 00:80:37:ee:38:9f test1.gif
- [fix] added service type to connect to to *btctl connect* command btctl connect <bda> SERial|LAN|DUP
check *btctl -h*
- [fix] SDP service search and attribute request can be done on the same L2CAP connection
- [fix] some OBEX fixes

br, Dmitry

Hi All.

Find new Affix release Affix-0_99 on http://affix.sourceforge.net

Profiles supported:
- Service Discovery.
- Serial Port.
- LAN Access.
- Dialup Networking.
- OBEX Object Push.
- OBEX File Transfer.
- PAN.

GUI environment A.F.E - Affix Frontend Environment available for use.
http://affix.sourceforge.net/afe
Link can be found on Affix WEB site in *Links* section.

CHANGES.

Version 0.99 [14.04.2002]
- [fix/changes] some SDP parts re-written.
- [changes] sockaddr_{hci,l2cap,rfcomm} repleaced by *sockaddr_affix* !NOTE: it requires to recompile and reinstall whole affix
- [new] *btctl* has now *prompt* (ftp) command - interactive shell & File Transfer Console (OBEX).
- [new] OBEX client now full featured (in ftp mode).
commands: open, close, put, get, push, rm, cd, mkdir
- [new] Linux kernel 2.5.x supported (not well tested)
- [new] added new info to README (usage examples, commands explanation).

br, Dmitry

Hi All.

Find new Affix release Affix-1_00 on http://affix.sourceforge.net

USB support improved... Works with more devices.

Profiles supported:
- Service Discovery.
- Serial Port.
- LAN Access.
- Dialup Networking.
- OBEX Object Push.
- OBEX File Transfer.
- PAN.

GUI environment A.F.E - Affix Frontend Environment available for use.
http://affix.sourceforge.net/afe

Link can be found on Affix WEB site in *Links* section.

Version 1.0pre1 [24.05.2002]
- [new] Added Audio support - SCO connections. Initial version.
- [changes] openobex removed from project. *openobex* has to be downlaod separately from:
http://sourceforge.net/projects/openobex/
or if you are Debian user just:
apt-get install libopenobex1
apt-get install libopenobex-dev
- [fix/changes] USB driver modified. It reads EP addresses from the device. It now support some non-standard devices.
- [fix] some fixes in uart driver.
- [fix] CC in config.in can be set to properly compile by different compiler. (by cross compiler)

br, Dmitry

Dmitry Kasatkin
Nokia Research Center / Helsinki
Mobile: +358 50 4836365
E-Mail: [email protected]

Hi All,

Find new Affix release Affix-1_00pre2 on http://affix.sourceforge.net
It has improved UART, USB and extra drivers.
Anycom cards supported

Version 1.0pre2 [31.05.2002]
- [new] new drivers for *bluecard* cards (Anycom) and 3COM cards
- [new] cross-compiling support (ARM, PowerPC,...)
- [new] *open_uart* accept speed (no need to call stty)
- [fix] affix_uart support Xircom cards
- [changes] libbt*.so libs moved to libaffix*.so
- [fix] now can be compiled on kernels <= 2.4.6

Profiles supported:
- Service Discovery.
- Serial Port.
- LAN Access.
- Dialup Networking.
- OBEX Object Push.
- OBEX File Transfer.
- PAN.

GUI environment A.F.E - Affix Frontend Environment available for use.
http://affix.sourceforge.net/afe

Link can be found on Affix WEB site in *Links* section.

br, Dmitry
+358 50 4836365

Hi,

Small patch. Otherwise PCMCIA will not work (modules went to invalid place).

br, Dmitry

Dmitry Kasatkin
Nokia Research Center / Helsinki
Mobile: +358 50 4836365
E-Mail: [email protected]

diff -Naur Affix-1_00pre2/Configure affix/Configure
@@ -19,7 +19,7 @@
 #   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
 #
 #
-#   $Id: Configure,v 2.48 2002/06/01 00:07:45 kds Exp $
+#   $Id: Configure,v 2.50 2002/06/03 10:48:41 kds Exp $
 #
 #   Configuration script (adopted from PCMCIA package) 
 #   

@@ -403,19 +403,12 @@
 
 
 if [ "$CONFIG_MODVERSIONS" = "y" ] ; then
-    if [ $CONF_SRC != 1 ] ; then
 	MODVER="$LINUX/include/linux/$MODVER"
 	if [ ! -r "$MODVER" ] ; then
 	    echo "$MODVER does not exist!"
 	    echo "    To fix, run 'make dep' in $LINUX."
 	    fail
 	fi
-    else
-	# use running kernel
-	mv $MODVER include/affix
-	ln -sf ../../../include/affix/$MODVER ./kernel/include/linux/$MODVER
-	MODVER="$BTDIR/kernel/include/linux/$MODVER"
-    fi
 else
     rm -f $MODVER
 fi

@@ -474,6 +467,34 @@
 CPPFLAGS_KERNEL="$CPPFLAGS_KERNEL -D__KERNEL__ -DMODULE $MFLAG"
 LDFLAGS="${CROSS_LDFLAGS:-}"
 
+#=======================================================================
+
+# How should the startup scripts be configured?
+
+if [ "$PREFIX" = "" ] ; then
+    if [ -d /sbin/init.d -o -d /etc/rc.d/init.d -o -d /etc/init.d ] ; then
+	echo "It looks like you have a System V init file setup."
+	SYSV_INIT=y
+	if [ -d /sbin/init.d ] ; then
+	    RC_DIR=/sbin/init.d
+	elif [ -d /etc/rc.d/init.d ] ; then
+	    RC_DIR=/etc/rc.d
+	else
+	    RC_DIR=/etc
+	fi
+    else
+	echo "It looks like you have a BSD-ish init file setup."
+	SYSV_INIT=
+    fi
+else
+    ask_bool "System V init script layout" SYSV_INIT
+    if [ "$SYSV_INIT" = "y" ] ; then
+	ask_str "Top-level directory for RC scripts" RC_DIR
+    fi
+fi
+
+echo ""
+
 
 #=======================================================================
 

@@ -503,42 +524,12 @@
 	write_str_ne $x
 done
 for x in CROSS_COMPILE CROSS_CPPFLAGS CROSS_LDFLAGS \
-	 BTDIR LINUX PREFIX PROGDIR LIBDIR RCDIR ARCH HOST_ARCH \
+	 BTDIR LINUX PREFIX PROGDIR MODDIR LIBDIR RCDIR ARCH HOST_ARCH SYSV_INIT RC_DIR \
 	 CPPFLAGS_KERNEL CPPFLAGS CFLAGS LDFLAGS CPPFLAGS_GLIB LDFLAGS_GLIB \
 	 CPPFLAGS_OBEX LDFLAGS_OBEX; do
     write_str_cfg $x
 done
 write_nl
-
-#=======================================================================
-
-# How should the startup scripts be configured?
-
-if [ "$PREFIX" = "" ] ; then
-    if [ -d /sbin/init.d -o -d /etc/rc.d/init.d -o -d /etc/init.d ] ; then
-	echo "It looks like you have a System V init file setup."
-	SYSV_INIT=y
-	if [ -d /sbin/init.d ] ; then
-	    RC_DIR=/sbin/init.d
-	elif [ -d /etc/rc.d/init.d ] ; then
-	    RC_DIR=/etc/rc.d
-	else
-	    RC_DIR=/etc
-	fi
-    else
-	echo "It looks like you have a BSD-ish init file setup."
-	SYSV_INIT=
-    fi
-    write_bool SYSV_INIT
-    if [ "$SYSV_INIT" = "y" ] ; then write_str_cfg RC_DIR ; fi
-else
-    ask_bool "System V init script layout" SYSV_INIT
-    if [ "$SYSV_INIT" = "y" ] ; then
-	ask_str "Top-level directory for RC scripts" RC_DIR
-    fi
-fi
-
-echo ""
 
 #=======================================================================
 

diff -Naur Affix-1_00pre2/etc/Makefile affix/etc/Makefile
@@ -18,7 +18,7 @@
 #   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
 #
 #
-#   $Id: Makefile,v 1.25 2002/05/30 22:44:35 kds Exp $
+#   $Id: Makefile,v 1.26 2002/06/03 10:34:36 kds Exp $
 #
 #   Makefile for installing scripts
 #

@@ -50,7 +50,7 @@
 	install -m 0755 -d $(PREFIX)/etc/ppp/ip-down.d
 	install -m 0555 ./affix/masq-down $(PREFIX)/etc/ppp/ip-down.d
 
-	if [ -d /etc/modutils ] ; then \
+	@if [ -d /etc/modutils ] ; then \
 		install -m 0644 ./modutils /etc/modutils/affix; \
 		update-modules; \
 	fi

Hi,

Please ignore the Affix-1_00pre2.patch

Use this one
Affix-1_00pre2.patch.1

br, Dmitry

 Dmitry Kasatkin
 Nokia Research Center / Helsinki
 Mobile: +358 50 4836365
 E-Mail: [email protected]

diff -Naur Affix-1_00pre2/Configure affix/Configure
@@ -19,7 +19,7 @@
 #   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
 #
 #
-#   $Id: Configure,v 2.48 2002/06/01 00:07:45 kds Exp $
+#   $Id: Configure,v 2.50 2002/06/03 10:48:41 kds Exp $
 #
 #   Configuration script (adopted from PCMCIA package) 
 #   

@@ -403,19 +403,12 @@
 
 
 if [ "$CONFIG_MODVERSIONS" = "y" ] ; then
-    if [ $CONF_SRC != 1 ] ; then
 	MODVER="$LINUX/include/linux/$MODVER"
 	if [ ! -r "$MODVER" ] ; then
 	    echo "$MODVER does not exist!"
 	    echo "    To fix, run 'make dep' in $LINUX."
 	    fail
 	fi
-    else
-	# use running kernel
-	mv $MODVER include/affix
-	ln -sf ../../../include/affix/$MODVER ./kernel/include/linux/$MODVER
-	MODVER="$BTDIR/kernel/include/linux/$MODVER"
-    fi
 else
     rm -f $MODVER
 fi

@@ -474,6 +467,34 @@
 CPPFLAGS_KERNEL="$CPPFLAGS_KERNEL -D__KERNEL__ -DMODULE $MFLAG"
 LDFLAGS="${CROSS_LDFLAGS:-}"
 
+#=======================================================================
+
+# How should the startup scripts be configured?
+
+if [ "$PREFIX" = "" ] ; then
+    if [ -d /sbin/init.d -o -d /etc/rc.d/init.d -o -d /etc/init.d ] ; then
+	echo "It looks like you have a System V init file setup."
+	SYSV_INIT=y
+	if [ -d /sbin/init.d ] ; then
+	    RC_DIR=/sbin/init.d
+	elif [ -d /etc/rc.d/init.d ] ; then
+	    RC_DIR=/etc/rc.d
+	else
+	    RC_DIR=/etc
+	fi
+    else
+	echo "It looks like you have a BSD-ish init file setup."
+	SYSV_INIT=
+    fi
+else
+    ask_bool "System V init script layout" SYSV_INIT
+    if [ "$SYSV_INIT" = "y" ] ; then
+	ask_str "Top-level directory for RC scripts" RC_DIR
+    fi
+fi
+
+echo ""
+
 
 #=======================================================================
 

@@ -503,42 +524,12 @@
 	write_str_ne $x
 done
 for x in CROSS_COMPILE CROSS_CPPFLAGS CROSS_LDFLAGS \
-	 BTDIR LINUX PREFIX PROGDIR LIBDIR RCDIR ARCH HOST_ARCH \
+	 BTDIR LINUX PREFIX PROGDIR MODDIR LIBDIR RCDIR ARCH HOST_ARCH SYSV_INIT RC_DIR \
 	 CPPFLAGS_KERNEL CPPFLAGS CFLAGS LDFLAGS CPPFLAGS_GLIB LDFLAGS_GLIB \
 	 CPPFLAGS_OBEX LDFLAGS_OBEX; do
     write_str_cfg $x
 done
 write_nl
-
-#=======================================================================
-
-# How should the startup scripts be configured?
-
-if [ "$PREFIX" = "" ] ; then
-    if [ -d /sbin/init.d -o -d /etc/rc.d/init.d -o -d /etc/init.d ] ; then
-	echo "It looks like you have a System V init file setup."
-	SYSV_INIT=y
-	if [ -d /sbin/init.d ] ; then
-	    RC_DIR=/sbin/init.d
-	elif [ -d /etc/rc.d/init.d ] ; then
-	    RC_DIR=/etc/rc.d
-	else
-	    RC_DIR=/etc
-	fi
-    else
-	echo "It looks like you have a BSD-ish init file setup."
-	SYSV_INIT=
-    fi
-    write_bool SYSV_INIT
-    if [ "$SYSV_INIT" = "y" ] ; then write_str_cfg RC_DIR ; fi
-else
-    ask_bool "System V init script layout" SYSV_INIT
-    if [ "$SYSV_INIT" = "y" ] ; then
-	ask_str "Top-level directory for RC scripts" RC_DIR
-    fi
-fi
-
-echo ""
 
 #=======================================================================
 

diff -Naur Affix-1_00pre2/README affix/README
@@ -213,7 +213,11 @@
 	6) Update system configuration.
 
   	- For PCMCIA Bluetooth devices:
-	   For Nokia Connectivity Card the following lines should added to
+	   Affix installer copies configuration files from etc/pcmcia to
+	   /etc/pcmcia for all supported PCMCIA devices. Check if your PCMCIA
+	   configuration read those files automaticaly.
+	   Otherwise you need add some configuration options manually, e.g.
+	   for Nokia DTL-1/DTL-4 the following lines should added to
 	   the /etc/pcmcia/config file:
 	   a) to the device driver definitions
 		device "affix_uart_cs"

@@ -222,6 +226,8 @@
 		card "Nokia Mobile Phones DTL-1"
 		    manfid 0x0124, 0x1000
 		    bind "affix_uart_cs"
+
+	   ->> Please check etc/pcmcia of all available options.
 
 	- For USB Bluetooth devices:
 	    Install the hot-plug package if automatic loading of the "affix_usb.o"

diff -Naur Affix-1_00pre2/etc/Makefile affix/etc/Makefile
@@ -18,7 +18,7 @@
 #   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
 #
 #
-#   $Id: Makefile,v 1.25 2002/05/30 22:44:35 kds Exp $
+#   $Id: Makefile,v 1.26 2002/06/03 10:34:36 kds Exp $
 #
 #   Makefile for installing scripts
 #

@@ -50,7 +50,7 @@
 	install -m 0755 -d $(PREFIX)/etc/ppp/ip-down.d
 	install -m 0555 ./affix/masq-down $(PREFIX)/etc/ppp/ip-down.d
 
-	if [ -d /etc/modutils ] ; then \
+	@if [ -d /etc/modutils ] ; then \
 		install -m 0644 ./modutils /etc/modutils/affix; \
 		update-modules; \
 	fi

diff -Naur Affix-1_00pre2/kernel/Makefile affix/kernel/Makefile
@@ -18,7 +18,7 @@
 #   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
 #
 #
-#   $Id: Makefile,v 2.32 2002/05/31 15:23:29 kds Exp $
+#   $Id: Makefile,v 2.33 2002/06/03 11:57:38 kds Exp $
 #
 #   Makefile for compiling core module of the bluetooth stack
 #

@@ -73,7 +73,7 @@
 DMODULE = affix.o
 
 all:	subdirs $(MODULE)
-	echo $(DIRS)
+#	echo $(DIRS)
 
 subdirs:
 	@set -e; for d in $(DIRS); do $(MAKE) -C $$d all; done

diff -Naur Affix-1_00pre2/kernel/btcore/hci_mgr.c affix/kernel/btcore/hci_mgr.c
@@ -19,7 +19,7 @@
 */
 
 /* 
-   $Id: hci_mgr.c,v 2.58 2002/05/31 15:23:29 kds Exp $
+   $Id: hci_mgr.c,v 2.59 2002/06/03 11:57:38 kds Exp $
 
    HCI Manager
 

@@ -600,7 +600,6 @@
 	btl_head_init(&btdevs);
 
 #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 7)
-	down(&exit_sema);
 	/* start thread here */
 	pid = kernel_thread(mgr_thread, NULL, 0);
 #else

@@ -627,9 +626,6 @@
 {
 	DBFENTER;
 
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 4, 7)
-	down(&exit_sema);
-#endif
 	if( pid != -1 ) {
 		kill_proc(pid, SIGTERM, 1);
 		down(&exit_sema);

diff -Naur Affix-1_00pre2/kernel/include/affix/bluez.h affix/kernel/include/affix/bluez.h
@@ -173,6 +173,8 @@
 		return 0;
 
 	netif_stop_queue(hdev->dev);
+	tasklet_kill(&hdev->tx_task);
+	skb_queue_purge(&hdev->txq);
 	err = hdev->close(hdev);
 
 	return err;

Hi All,

Find new Affix release Affix-1_00pre3 on http://affix.sourceforge.net
It has improved UART, USB and extra drivers.

Anycom, 3COM, Xircom works now.
Socket CF works

Version 1.0pre3 [06.06.2002]
- [fix] l2cap state machine
- [new] *btctl* now remembers found devices - device cache.
*btctl list* - to see the list
*btctl flush* - to forget it
*btctl connect <id> ...
actually id can be provided instead bda in every command.
- [new] any driver from BlueZ can be compiled in Affix. Just include <affix/bluez.h> instead <net/bluetooth/*.h>
- [fix] work on kernels < 2.4.7
- [fix] Socket CF card works now perfectly.
(Socket changed device id to new one - it caused the problem)
- [new] Affix install pcmcia config file *.conf to /etc/pcmcia so that they are read automaticaly - no needs to change /etc/pcmcia/config
- [new] new features for *btctl open_uart*:
*btctl open_uart <device> <speed>
- [fix] Xircom card works now.
- [new] obex-server can work with different root-folders (AFE support)
- [new] btsdp starts automatically (SDPInit(SDP_SVC_PROVIDER)). so btsdp starts when btsrv does.
- [new] *btctl* andestand mnemonics for dev classes and shows it.

Affix works on platforms (tested):
- i386.
- ARM (e.g. Compaq iPac).
- PowerPC (e.g. iMac).

Affix currently supports the following Bluetooth Profiles:
- General Access Profie
- Service Discovery Profile
- Serial Port Profile
- DialUp Networking Profile
- LAN Access Profile
- OBEX Object Push Profile
- OBEX File Transfer Profile
- PAN Profile

GUI environment A.F.E - Affix Frontend Environment available for use.
http://affix.sourceforge.net/afe

Link can be found on Affix WEB site in *Links* section.

br, Dmitry
Nokia Research
+358 50 4836365

Hi All,

Find new Affix release Affix-1_00pre4 on http://affix.sourceforge.net
This is stable version.
See News Section.

Version 1.0pre4 [15.06.2002]
- [fix] rfcomm fixed. freeze happened in some situation.
- [fix] affix_rfcomm.o module use counter could have negative value
- [fix] btctl cache support fixed. it works
- [fix] some other fixes stability fixes

Affix works on platforms (tested):
- i386.
- ARM (e.g. Compaq iPac).
- PowerPC (e.g. iMac).

Affix currently supports the following Bluetooth Profiles:
- General Access Profie
- Service Discovery Profile
- Serial Port Profile
- DialUp Networking Profile
- LAN Access Profile
- OBEX Object Push Profile
- OBEX File Transfer Profile
- PAN Profile

GUI environment A.F.E - Affix Frontend Environment available for use.
http://affix.sourceforge.net/afe

Link can be found on Affix WEB site in *Links* section.

br, Dmitry
Nokia Research
+358 50 4836365

Hi,

Affix on iPAQ is ready.
http://affix.sourceforge.net/ipaq.shtml

AFE updated for Pocket devices.

br, Dmitry

 Dmitry Kasatkin
 Nokia Research Center / Helsinki
 Mobile: +358 50 4836365
 E-Mail: [email protected]

Hi,

Please download new patch for Affix

br, Dmitry

 Dmitry Kasatkin
 Nokia Research Center / Helsinki
 Mobile: +358 50 4836365
 E-Mail: [email protected]

Hi All,

Find new Affix release Affix-1_00pre5 on http://affix.sourceforge.net
This is stable version. See News Section.

New features:
- iMac, iPaq tested.
- obex fixed.
- packages for iPaq -> http://affix.sourceforge.net/ipaq.shtml

Version 1.0pre5 [24.06.2002]
- [new] *open_uart* enhanced to support vendor dependend initialization btctl open_uart <vendor> <speed> <flags>
- [fix] minor rfcomm fixes.
- [fix] btobex fixed. It was not working after in *pre3/4* because of one bug
- [fix] btctl inquiry cache finaly fixed.
- [fix] SDP fixed to correctly work on ARM/SPARC/PPC architectures
- [changes] SDP file structure changed. Header files moved to affix client need to include sdp.h, sdpclt.h and sdpsrv.h
- [changes] user space apps. shall use only <affix/btcore.h>
do not use <affix/hci.h>

Affix works on platforms (tested):
- i386.
- ARM (e.g. Compaq iPac).
- PowerPC (e.g. iMac).

Affix currently supports the following Bluetooth Profiles:
- General Access Profie
- Service Discovery Profile
- Serial Port Profile
- DialUp Networking Profile
- LAN Access Profile
- OBEX Object Push Profile
- OBEX File Transfer Profile
- PAN Profile

GUI environment A.F.E - Affix Frontend Environment available for use.
http://affix.sourceforge.net/afe

Link can be found on Affix WEB site in *Links* section.

br, Dmitry

 Dmitry Kasatkin
 Nokia Research Center / Helsinki
 *Affix* Project Coordinator (http://affix.sourceforge.net)
 Mobile: +358 50 4836365
 E-Mail: [email protected]

Hi All,

Find new Affix release Affix-1_00pre6 on http://affix.sourceforge.net

Latest News

* [06.07.2002] New Affix Release - Affix-1_00pre6. (see Changelog)).
* [05.06.2002] Affix Debain packages from Mario Joussen. Add following lines to sources.list:
deb http://people.debian.org/~joussen/unofficial unstable . deb-src http://people.debian.org/~joussen/unofficial unstable .

New features:
- iMac, iPaq tested.
- packages for iPaq -> http://affix.sourceforge.net/ipaq.shtml
- Audio suppored (in/out modes)

Version 1.0pre6 [06.07.2002]
- [new] libaffix*.so now has version
- [new] added *cleanold* rule to Makefile to remove old versions of the files
- [fix] OBEX server and client fixed and improved.
- [new] *put*, *get*, and *push* commands measure the transfer speed
- [new] btctl got new commands: *ping* and *sping*
*sping* measures transfer speed in one direction
- [new] affix_usb able to send audio data to Bluetooth module
- [new] added new library *affix_utils* and some functions moved there
- [fix] some minor fixes over the code

Affix works on platforms (tested):
- i386.
- ARM (e.g. Compaq iPac).
- PowerPC (e.g. iMac).

Affix currently supports the following Bluetooth Profiles:
- General Access Profie
- Service Discovery Profile
- Serial Port Profile
- DialUp Networking Profile
- LAN Access Profile
- OBEX Object Push Profile
- OBEX File Transfer Profile
- PAN Profile

GUI environment A.F.E - Affix Frontend Environment available for use.
http://affix.sourceforge.net/afe

Link can be found on Affix WEB site in *Links* section.

br, Dmitry

 Dmitry Kasatkin
 Nokia Research Center / Helsinki
 Affix Project Leader
 Mobile: +358 50 4836365
 E-Mail: [email protected]

Hi All,

Find new Affix release Affix-1.0.0pre7 on http://affix.sourceforge.net

Now it consist of two separated packages: *affix* and *affix-kernel*.

affix-kernel provides kernel level stuff.
affix provides user level stuff.

In order to compile *affix* package necessary to install *affix-kernel* package.

Version 1.0.0pre7 [15.07.2002]
- [fix] clean resources correctrly on unsuccessfull connection
- [fix] PCMCIA cards fix... works...

Try it.

br, Dmitry

 Dmitry Kasatkin
 Nokia Research Center / Helsinki
 *Affix* Project Leader (http://affix.sourceforge.net)
 Mobile: +358 50 4836365
 E-Mail: [email protected]