spanning multiple chips with one mtd device
Hi All,
I've got a board here with two strataflash chips that are contiguous in memory. I'd like linux to use as one mtd device. I've kind of got it to kind of work by faking out cfi_chip_setup in cfi_probe.c. I just increase cfi->cfiq->DevSize by one so that it thinks the device is twice as big and then I add one to cfi->cfiq->NumEraseRegions so that it thinks that there are two erase blocks (each one being one of my flash chips).
This device is happily recognized and I can mount it as a jffs2 on /mnt. It even works as long as I don't write too much data to it. When I try to write enough data so that it should access the other flash chip I run into problems. The write seems to go OK and the data looks good but if I unmount and remount the partition all of the data is lost and I've got an empty filesystem. If I've only written a few small files I can unmount and remount without problem.
If anyone has any hints, tips or pointers for me I'd really appreciate it.
Thanks,
Andy
Signature · 4 lines
Andrew Dixon Software Engineer Seranoa Networks 978.897.3434 x231
Hi!
Quoted 4 lines
[yet another approach]
If anyone has any hints, tips or pointers for me I'd really appreciate it.
You have create the fourth solution for the same problem - as far as I am aware of it. Search for Aleksander Sanochkin or Robert Kaiser on the list.
The general problem is concatenating two partitions, your problem is merely a subset thereof.
Jörn
Signature · 2 lines
A loving atmosphere in your home is the foundation for you life. -- reputely from the Dalai Lama, unverified