Q: PCI Driver ioremap
I am creating a PCI driver for a custom card and want to write 0xffff to a location offset from the base by 0x48 and have the following code:
<snip>
unsigned int io_addr;
unsigned int io_size;
void* base;pci_enable_device (pdev)io_addr = pci_resource_start(pdev, 0);io_size = pci_resource_len(pdev, 0);
if ((pci_resource_flags(pdev, 0) & IORESOURCE_MEM)){
if(check_mem_region(io_addr, io_size))
DBG("Already In Use");//this is never reached
request_mem_region(io_addr, io_size , "Card Driver");
base=ioremap(io_addr, io_size);
if(base==0)
DBG("memory mapped wrong\n");//this is never reached
writew(0xffff, base + 0x48);<snip>
The card is found, io_addr = 0xe9011000 and io_size = 0x200.
The write is unsuccessful or at least the data never reaches the card. What am I doing incorrectly?
Thanks and best regards,
David
Quoted 5 lines · David Stroupe
I am creating a PCI driver for a custom card and want to write
0xffffto a location offset from the base by0x48and
have the following code:
Quoted 11 lines
<snip>
unsigned intio_addr;
unsigned intio_size;
void* base;pci_enable_device(pdev)io_addr=pci_resource_start(pdev, 0);io_size=pci_resource_len(pdev, 0);
if ((pci_resource_flags(pdev, 0)& IORESOURCE_MEM)){
if(check_mem_region(io_addr, io_size))
DBG("Already In Use");//this is never reached
request_mem_region(io_addr, io_size , "Card Driver");
In 2.4 and later, check request_mem_region return value, and never call check_mem_region.
Quoted 10 lines
base=ioremap(io_addr, io_size); if(base==0) DBG("memory mapped wrong\n");//this is never reached writew(0xffff, base + 0x48);<snip>
The card is found,
io_addr=0xe9011000andio_size=0x200.The write is unsuccessful or at least the data never reaches the card.
What am I doing incorrectly?
Looks correct to me... maybe you need to do
readw(base + 0x48)
to flush the transaction?
Signature · 4 lines
Jeff Garzik | "Why is it that attractive girls like you
Building 1024 | always seem to have a boyfriend?"
MandrakeSoft | "Because I'm a nympho that owns a brewery?"
| - BBC TV show "Coupling"Quoted 1 line
pci_enable_device(pdev)
Should check the return but that is fine I guess
Quoted 6 lines
if(base==0) DBG("memory mapped wrong\n");//this is never reached writew(0xffff, base + 0x48);<snip>
The write is unsuccessful or at least the data never reaches the card.
What am I doing incorrectly?
Looks fine to me. Obviously you should a read to make sure the write reaches the card from PCI posting but I'd expect that to timeout and hit the card