Terratec DMX (Newbie)
Hey there.
Soory about the cross-posting, but I'm hoping someone can give me a couple of pointers. I have a Terratec SoundSystem DMX (that's a Maestro 2E card) which I can't get fired up using either alsaconf or by hand (I'm running the debian packages of alsa 0.9.0beta10) When I configure the card in alsaconf, I get through the first part ok (though I'm guessing at the values for configuration), until it's time to load up the mixer progs, at which point it crashes out saying:
# Loading driver:
# Starting ALSA sound driver (version 0.9.0beta10): no sound cards
# defined. # Setting the PCM volume to 100% and the Master output volume tp 50% # amixer: Mixer attach default error: No such file or directory # Could not initialize the mixer, the card was probably not detected # correctly.
If I do the configuration by hand in /etc/modules.conf, I get an error saying that 'parm_snd_pcm_channels_p' and 'parm_snd_pcm_channels_c' do not exist (sorry, I don't have the exact output to hand)
If someone could mail me the correct values and a quick how-to on getting the damn thing fired up, I'd much appreciate it.
Thanks
Chris
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
Hi,
At Mon, 25 Feb 2002 13:33:05 +1100,
Quoted 19 lines · Chris Wenn
Hey there.
Soory about the cross-posting, but I'm hoping someone can give me a couple of pointers. I have a Terratec SoundSystem DMX (that's a Maestro 2E card) which I can't get fired up using either alsaconf or by hand (I'm running the debian packages of alsa 0.9.0beta10) When I configure the card in alsaconf, I get through the first part ok (though I'm guessing at the values for configuration), until it's time to load up the mixer progs, at which point it crashes out saying:
# Loading driver:
# Starting ALSA sound driver (version 0.9.0beta10): no sound cards# defined. # Setting the PCM volume to 100% and the Master output volume tp 50% # amixer: Mixer attach default error: No such file or directory # Could not initialize the mixer, the card was probably not detected # correctly.
Quoted 3 lines
If I do the configuration by hand in
/etc/modules.conf, I get an error saying that 'parm_snd_pcm_channels_p' and 'parm_snd_pcm_channels_c' do not exist (sorry, I don't have the exact output to hand)
these module parameters are obsolete on 0.9.0 (they are for 0.5.x drivers). sorry if you referred to INSTALL in alsa-driver. the document was wrong. now it's fixed.
Quoted 2 lines
If someone could mail me the correct values and a quick how-to on getting the damn thing fired up, I'd much appreciate it.
please remove all module options from snd-es1968 (except for snd_index). it should work as default.
also, please make sure that the version of your alsa-utils / alsa-lib is really 0.9.0.
HTH.
ciao,
Takashi
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel