Skip to contentSkip to conversation

2.5.5-dj2 and vfat oopses (ksymoops output included)

BUG Todor Todorov 2 participants 2 messages Feb 27, 2002

lore
Share & tools
lore
#0 lore raw

Hello everyone,

trying to copy a file to a fat 32 partition, the kernel oopses. Here is the information % uname -r

       2.5.5-dj2

distro:
Debian GNU/Linux unstable
machine:
Dell Inspiron 8000
partition:
hda7, type c (FAT 32 LBA) on a 40 GB Toshiba HD
fstab entry for the partition:
/dev/hda7 /mnt/data vfat
rw,quiet,uid=1000,gid=100,codepage=850 0 0

ksymoops (made it immediatelly after the oops with the same modules loaded and same kernel):

ksymoops 2.4.3 on i686 2.5.5-dj2. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.5.5-dj2/ (default)
-m /boot/System.map-2.5.5-dj2 (default)

Warning: You did not tell me where to find symbol information. I will assume that the log matches the kernel and modules that are running right now and I'll use the default options above for symbol resolution. If the current kernel and/or modules do not match the log, you can get more accurate output by telling me the kernel version and where to find map, modules, ksyms etc. ksymoops -h explains the options.

Warning (compare_maps): ksyms_base symbol idle_cpu_R__ver_idle_cpu not found in System.map. Ignoring ksyms_base entry Warning (compare_maps): ksyms_base symbol vmalloc_to_page_R__ver_vmalloc_to_page not found in System.map. Ignoring ksyms_base entry

Unable to handle kernel NULL pointer dereference at virtual address 00000053
d097f966
*pde = 00000000
Oops: 0000
CPU:    0
EIP:    0010:[<d097f966>]    Tainted: P

Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010293
eax: 00000053 ebx: 00000001 ecx: 00000000 edx: d0983e00
esi: c78e3db7 edi: c76c3000 ebp: c76c3042 esp: c78e3d3c
ds: 0018 es: 0018 ss: 0018

Stack: 00000024 c78e3e20 ce426ce0 ca219f60 6f646e6f 6152206e 28206e69 68746f4e
      c76c2ffe c78e3dbc 654d2073 6b694c20 6f592065 6f442075 536d2e29 
c78e3db8
      c78e0101 00000001 00000002 00000006 00000000 00000000 c0267bc0 
00000020
Call Trace: [<d0980191>] [<d0980214>] [<d0983e00>] [<d0983e00>] [<d0980427>]
  [<d09804f4>] [<d097f61b>] [<d09809d3>] [permission+123/132] 
[vfs_create+246/284] [open_namei+357/1728]
Code: 0f b6 14 08 80 3c 08 00 0f 45 c2 88 44 24 7c 0f b6 c0 f6 80
Quoted 1 line
Quoted 1 line

EIP; d097f966 <[vfat]vfat_create_shortname+1ca/750> <=====

Trace; d0980190 <[vfat]vfat_fill_slots+88/2d4> Trace; d0980214 <[vfat]vfat_fill_slots+10c/2d4> Trace; d0983e00 <[nls_cp850]table+0/1e> Trace; d0983e00 <[nls_cp850]table+0/1e> Trace; d0980426 <[vfat]vfat_build_slots+4a/54> Trace; d09804f4 <[vfat]vfat_add_entry+c4/28c> Trace; d097f61a <[vfat]vfat_cmpi+66/7c> Trace; d09809d2 <[vfat]vfat_create+52/174> Code; d097f966 <[vfat]vfat_create_shortname+1ca/750> 00000000 <_EIP>:

Code;  d097f966 <[vfat]vfat_create_shortname+1ca/750>   <=====
  0:   0f b6 14 08               movzbl (%eax,%ecx,1),%edx   <=====
Code;  d097f96a <[vfat]vfat_create_shortname+1ce/750>
  4:   80 3c 08 00               cmpb   $0x0,(%eax,%ecx,1)
Code;  d097f96e <[vfat]vfat_create_shortname+1d2/750>
  8:   0f 45 c2                  cmovne %edx,%eax
Code;  d097f970 <[vfat]vfat_create_shortname+1d4/750>
  b:   88 44 24 7c               mov    %al,0x7c(%esp,1)
Code;  d097f974 <[vfat]vfat_create_shortname+1d8/750>
  f:   0f b6 c0                  movzbl %al,%eax
Code;  d097f978 <[vfat]vfat_create_shortname+1dc/750>
 12:   f6 80 00 00 00 00 00      testb  $0x0,0x0(%eax)

3 warnings issued. Results may not be reliable.

The P in Tainted: is because of the NVdriver module. Fat and vfat compiled as modules too. I can read with no problems from the partition, but I can't write to it. Any clue/patch ?

Regards,
Todor

#1 lore raw
Quoted 6 lines · Todor Todorov

Hello everyone,

trying to copy a file to a fat 32 partition, the kernel oopses. Here is the information
% uname -r

        2.5.5-dj2
Quoted 9 lines

distro:
Debian GNU/Linux unstable
machine:
Dell Inspiron 8000
partition:
hda7, type c (FAT 32 LBA) on a 40 GB Toshiba HD
fstab entry for the partition:
/dev/hda7 /mnt/data vfat
rw,quiet,uid=1000,gid=100,codepage=850 0 0

Thanks for good bug report. Probably, the following patch fix this bug. Could you try the following patch?

fs/nls/nls_cp850.c renamed from fs/nls/nls_cp850.c.orig +1 -0
@@ -296,6 +296,7 @@
 	uni2char:	uni2char,
 	char2uni:	char2uni,
 	charset2lower:	charset2lower,
+	charset2upper:	charset2upper,
 	owner:		THIS_MODULE,
 };
 
Signature · 1 line
OGAWA Hirofumi <[email protected]>