Number of subdevices on midi.
I have tryed to get some answer from Jaroslav about subdevices on midi. Im trying to write
a driver for midisport 8x8/s and that have 9 midi ports. On my hack to figure out
the protocol I use virmidi to handle the interface to alsa. But virmidi only have four
subdevices per device. I need to see the driver for a midi interface that using all the
16 subdevices. Since I don't get answer from Jaroslav i guess he don't have the time
or my question is stupid. But can someone help me out? Where should I look?
Quoted 6 lines · you
subdevices per device. I need to see the driver for a midi interface that using all the
16 subdevices. Since I don't get answer from Jaroslav i guess he don't have the time
or my question is stupid. But can someone help me out? Where should I look?
I have done a little work on a driver I'm writing for a PCI-MIDI interface system I designed (card is built and seems to work, breakout box isn't built yet). I first used the MTP-AV driver as a model, but had quite a time figuring out how exactly it hooked up with the sequencer, and eventually decided to write a kernel sequencer client that talks to the card directly. Much easier, and I can add some interesting features using user packets, and also I think it will be faster. This does have the disadvantage of leaving rawmidi apps in the cold, though, so I'd be interested in whatever you come up with.
cheers -- Michael Ashton <[email protected]>
Quoted 4 lines · Peter Enderborg
I have tryed to get some answer from Jaroslav about subdevices on midi. Im trying to write a driver for midisport 8x8/s and that have 9 midi ports. On my hack to figure out the protocol I use virmidi to handle the interface to alsa. But virmidi only have four subdevices per device. I
You can set up to eight virmidi devices (snd_midi_devs parameter controls this count). On rawmidi side, there is 16 rawmidi substreams (subdevices) per one virmidi device. These subdevices are used for event merging (write) and coping (read). On sequencer side, there is one client and one port connected to virmidi device.
Quoted 4 lines
need to see the driver for a midi interface that using all the 16 subdevices. Since I don't get answer from Jaroslav i guess he don't have the time or my question is stupid. But can someone help me out? Where should I look?
There are two ways:
1) we can add a new mode to virmidi code which suppress copying and merging and connects more sequencer ports per a sequencer client to rawmidi subdevices to handle such devices
2) without any change - simply use more than one virmidi card and connect your code to more clients:
modprobe snd-virmidi snd_index=1,2 snd_enable=1,1 snd_midi_devs=8,8 (use index values as you wish) In this case, you should have available this routing table: sequencer (client:port) rawmidi (card:device:subdevice) 72:0 1:0:any 73:0 1:1:any .... .... 79:0 1:7:any 80:0 2:0:any .... ... 87:0 2:7:any Jaroslav
-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project http://www.alsa-project.org
SuSE Linux http://www.suse.com
Quoted 18 lines · Jaroslav Kysela
Quoted 4 lines · Peter Enderborg
I have tryed to get some answer from Jaroslav about subdevices on midi. Im trying to write a driver for midisport 8x8/s and that have 9 midi ports. On my hack to figure out the protocol I use virmidi to handle the interface to alsa. But virmidi only have four subdevices per device. I
You can set up to eight virmidi devices (
snd_midi_devsparameter controls this count). On rawmidi side, there is 16 rawmidi substreams (subdevices) per one virmidi device. These subdevices are used for event merging (write) and coping (read). On sequencer side, there is one client and one port connected to virmidi device.Quoted 4 lines
need to see the driver for a midi interface that using all the 16 subdevices. Since I don't get answer from Jaroslav i guess he don't have the time or my question is stupid. But can someone help me out? Where should I look?
Quoted 8 lines
There are two ways:
1) we can add a new mode to virmidi code which suppress copying and merging and connects more sequencer ports per a sequencer client to rawmidi subdevices to handle such devices
2) without any change - simply use more than one virmidi card and connect your code to more clients:
That is what I do now. But it is not pretty. My plan is to do a real driver not a virmidi user.
Quoted 5 lines
modprobe snd-virmidi snd_index=1,2 snd_enable=1,1 snd_midi_devs=8,8
(use index values as you wish)
Have you done that? This is what I get.
[root@pescadero pme]# /sbin/modprobe snd-virmidi snd_enable=1,1 snd_midi_devs=8,8/lib/modules/2.4.16/misc/snd-virmidi.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters /lib/modules/2.4.16/misc/snd-virmidi.o: insmod /lib/modules/2.4.16/misc/snd-virmidi.o failed /lib/modules/2.4.16/misc/snd-virmidi.o: insmod snd-virmidi failed
[root@pescadero pme]# /sbin/modprobe snd-virmidi snd_enable=1,1 snd_midi_devs=8/lib/modules/2.4.16/misc/snd-virmidi.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters /lib/modules/2.4.16/misc/snd-virmidi.o: insmod /lib/modules/2.4.16/misc/snd-virmidi.o failed /lib/modules/2.4.16/misc/snd-virmidi.o: insmod snd-virmidi failed
[root@pescadero pme]# /sbin/modprobe snd-virmidi snd_enable=1,1 snd_midi_devs=4,4
[root@pescadero pme]#
I also get the same with 5.
Quoted 20 lines
In this case, you should have available this routing table:
sequencer (client:port) rawmidi (card:device:subdevice)
72:0 1:0:any
73:0 1:1:any
.... ....
79:0 1:7:any
80:0 2:0:any
.... ...
87:0 2:7:anyJaroslav
-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project http://www.alsa-project.org
SuSE Linux http://www.suse.com
Quoted 4 lines
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
--
foo!
Quoted 41 lines · Peter Enderborg
Quoted 18 lines · Jaroslav Kysela
Quoted 4 lines · Peter Enderborg
I have tryed to get some answer from Jaroslav about subdevices on midi. Im trying to write a driver for midisport 8x8/s and that have 9 midi ports. On my hack to figure out the protocol I use virmidi to handle the interface to alsa. But virmidi only have four subdevices per device. I
You can set up to eight virmidi devices (
snd_midi_devsparameter controls this count). On rawmidi side, there is 16 rawmidi substreams (subdevices) per one virmidi device. These subdevices are used for event merging (write) and coping (read). On sequencer side, there is one client and one port connected to virmidi device.Quoted 4 lines
need to see the driver for a midi interface that using all the 16 subdevices. Since I don't get answer from Jaroslav i guess he don't have the time or my question is stupid. But can someone help me out? Where should I look?
Quoted 8 lines
There are two ways:
1) we can add a new mode to virmidi code which suppress copying and merging and connects more sequencer ports per a sequencer client to rawmidi subdevices to handle such devices
2) without any change - simply use more than one virmidi card and connect your code to more clients:That is what I do now. But it is not pretty. My plan is to do a real driver not a virmidi user.
Quoted 5 lines
modprobe snd-virmidi snd_index=1,2 snd_enable=1,1 snd_midi_devs=8,8
(use index values as you wish)
Have you done that? This is what I get.
Quoted 8 lines
[root@pescadero pme]#
/sbin/modprobesnd-virmidi snd_enable=1,1 snd_midi_devs=8,8/lib/modules/2.4.16/misc/snd-virmidi.o:init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters/lib/modules/2.4.16/misc/snd-virmidi.o: insmod/lib/modules/2.4.16/misc/snd-virmidi.ofailed/lib/modules/2.4.16/misc/snd-virmidi.o: insmod snd-virmidi failed
Oops. I've fixed this problem in CVS. Change SNDRV_RAWMIDI_DEVICES in alsa-kernel/include/rawmidi.h to 8.
Jaroslav
-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project http://www.alsa-project.org
SuSE Linux http://www.suse.com
At Sun, 7 Apr 2002 22:22:42 +0200 (CEST),
Quoted 53 lines · Jaroslav
Quoted 41 lines · Peter Enderborg
Quoted 18 lines · Jaroslav Kysela
Quoted 4 lines · Peter Enderborg
I have tryed to get some answer from Jaroslav about subdevices on midi. Im trying to write a driver for midisport 8x8/s and that have 9 midi ports. On my hack to figure out the protocol I use virmidi to handle the interface to alsa. But virmidi only have four subdevices per device. I
You can set up to eight virmidi devices (
snd_midi_devsparameter controls this count). On rawmidi side, there is 16 rawmidi substreams (subdevices) per one virmidi device. These subdevices are used for event merging (write) and coping (read). On sequencer side, there is one client and one port connected to virmidi device.Quoted 4 lines
need to see the driver for a midi interface that using all the 16 subdevices. Since I don't get answer from Jaroslav i guess he don't have the time or my question is stupid. But can someone help me out? Where should I look?
Quoted 8 lines
There are two ways:
1) we can add a new mode to virmidi code which suppress copying and merging and connects more sequencer ports per a sequencer client to rawmidi subdevices to handle such devices
2) without any change - simply use more than one virmidi card and connect your code to more clients:That is what I do now. But it is not pretty. My plan is to do a real driver not a virmidi user.
Quoted 5 lines
modprobe snd-virmidi snd_index=1,2 snd_enable=1,1 snd_midi_devs=8,8
(use index values as you wish)
Have you done that? This is what I get.
Quoted 8 lines
[root@pescadero pme]#
/sbin/modprobesnd-virmidi snd_enable=1,1 snd_midi_devs=8,8/lib/modules/2.4.16/misc/snd-virmidi.o:init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters/lib/modules/2.4.16/misc/snd-virmidi.o: insmod/lib/modules/2.4.16/misc/snd-virmidi.ofailed/lib/modules/2.4.16/misc/snd-virmidi.o: insmod snd-virmidi failed
Quoted 2 lines
Oops. I've fixed this problem in CVS. Change
SNDRV_RAWMIDI_DEVICESinalsa-kernel/include/rawmidi.hto 8.
in alsa-kernel/include/minors.h,
#define SNDRV_MINOR_RAWMIDI 8 /* 8 - 11 */
#define SNDRV_MINOR_RAWMIDIS 4
#define SNDRV_MINOR_PCM_PLAYBACK 16 /* 16 - 23 */
so we need to change this too..
it seems no problem to assign 8 rawmidi devices - 8 devices are free, although the comment says 8 - 11..
Takashi
Quoted 60 lines · Takashi Iwai
At Sun, 7 Apr 2002 22:22:42 +0200 (CEST),
Quoted 53 lines · Jaroslav
Quoted 41 lines · Peter Enderborg
Quoted 18 lines · Jaroslav Kysela
Quoted 4 lines · Peter Enderborg
I have tryed to get some answer from Jaroslav about subdevices on midi. Im trying to write a driver for midisport 8x8/s and that have 9 midi ports. On my hack to figure out the protocol I use virmidi to handle the interface to alsa. But virmidi only have four subdevices per device. I
You can set up to eight virmidi devices (
snd_midi_devsparameter controls this count). On rawmidi side, there is 16 rawmidi substreams (subdevices) per one virmidi device. These subdevices are used for event merging (write) and coping (read). On sequencer side, there is one client and one port connected to virmidi device.Quoted 4 lines
need to see the driver for a midi interface that using all the 16 subdevices. Since I don't get answer from Jaroslav i guess he don't have the time or my question is stupid. But can someone help me out? Where should I look?
Quoted 8 lines
There are two ways:
1) we can add a new mode to virmidi code which suppress copying and merging and connects more sequencer ports per a sequencer client to rawmidi subdevices to handle such devices
2) without any change - simply use more than one virmidi card and connect your code to more clients:That is what I do now. But it is not pretty. My plan is to do a real driver not a virmidi user.
Quoted 5 lines
modprobe snd-virmidi snd_index=1,2 snd_enable=1,1 snd_midi_devs=8,8
(use index values as you wish)
Have you done that? This is what I get.
Quoted 8 lines
[root@pescadero pme]#
/sbin/modprobesnd-virmidi snd_enable=1,1 snd_midi_devs=8,8/lib/modules/2.4.16/misc/snd-virmidi.o:init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters/lib/modules/2.4.16/misc/snd-virmidi.o: insmod/lib/modules/2.4.16/misc/snd-virmidi.ofailed/lib/modules/2.4.16/misc/snd-virmidi.o: insmod snd-virmidi failedQuoted 2 lines
Oops. I've fixed this problem in CVS. Change
SNDRV_RAWMIDI_DEVICESinalsa-kernel/include/rawmidi.hto 8.in
alsa-kernel/include/minors.h,
Quoted 7 lines
#define
SNDRV_MINOR_RAWMIDI8 /* 8 - 11 */
#defineSNDRV_MINOR_RAWMIDIS4
#defineSNDRV_MINOR_PCM_PLAYBACK16 /* 16 - 23 */so we need to change this too..
it seems no problem to assign 8 rawmidi devices - 8 devices are free, although the comment says 8 - 11..
It's right, I don't remember, if these device are reserved, but we can allocate next major when this problem arises. Fixed and thanks.
Jaroslav
-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project http://www.alsa-project.org
SuSE Linux http://www.suse.com